WO-5 (partial): the patch backtrack inner loop ('while bt_pos <
backtrack_end' in disc/patch.rs) issues per-sector reads to fill the
gap created by a damage-window skip. A long backtrack span can run
minutes; without an inline halt poll, the outer halt only takes
effect when control returns to the per-range loop. Adds a halt poll
at the top of each iteration so cancellation propagates inside the
backtrack span.
Per-sector read failures inside the backtrack already drop through
to the main fail path; this only changes the cancellation latency
between an /api/stop call and the producer actually unwinding. Drops
worst-case unwind from 'whole backtrack span × per-sector recovery
timeout' (minutes) to 'one in-flight SCSI command' (seconds).
The broader Arc<AtomicBool> → Halt migration on CopyOptions /
SweepOptions / PatchOptions / Drive::halt and Pipeline::send halt-
awareness is deferred — separate cycle, larger API impact.
WO-3c: Delete dead non-NOT_READY retry block (~100 LOC). The block
declared retry_count = 0 inside the per-iteration Err arm, so the
'MAX_NON_NOT_READY_RETRIES=3' budget actually fired exactly once
(1s pause + 1 retry) before falling through to NonTrimmed. The
'exponential backoff: 2s, 4s, 8s' comment was wrong by construction.
Cross-pass NonTrimmed retry (each pass gives the same sectors another
shot) already covers the recovery case, and gives the drive minutes
between attempts instead of 1-8 seconds — empirically what stochastic
recovery on the BU40N actually needs.
WO-4 (targeted slice): Add wedge-family cooldown on HARDWARE_ERROR /
ILLEGAL_REQUEST senses. These are what the BU40N's firmware fast-fail
state returns; every subsequent read in that state comes back in
<100ms. Pre-fix patch hammered the drive: mark NonTrimmed, sleep 1s,
advance, hit next wedge, mark, sleep 1s — exactly the rapid-retry
cadence the firmware is sensitive to. Now a wedge-family sense triggers
WEDGE_FAMILY_COOLDOWN_SECS=30 cooldown (matches read_error.rs's
ZONE_ENTRY_COOLDOWN_SECS), and WEDGE_ABORT_THRESHOLD=16 consecutive
wedges aborts the pass for autorip eject+reload. Any non-wedge read
clears the counter.
Also drops the duplicate NonTrimmed dispatch (Mapfile::record is
idempotent so it wasn't a correctness bug, but it doubled per-failure
consumer work).
WO-2 (delete SectorReader trait):
- The 0.18 trait split into SectorSource (read-only) and SectorSink
(write-only) is final; the legacy SectorReader alias was a bridge.
- Renames every internal &mut dyn SectorReader (~25 sites) to
&mut dyn SectorSource. The trait method capacity() becomes
capacity_sectors() with a default of 0 (preserves SectorReader's
default-0 behavior).
- Deletes the SectorReader trait, its blanket-to-Source bridge, and
the FileSectorReader type alias. Adds explicit forwarding impls
for Box<dyn SectorSource> and &mut dyn SectorSource so generic
decorators like DecryptingSectorSource<S: SectorSource> compose.
WO-3a (extract Disc::patch):
- Moves Disc::patch (1230 lines) and bytes_bad_in_title from
disc/mod.rs into disc/patch.rs as a split inherent impl. Zero
behavior change — pure mechanical relocation. disc/mod.rs drops
from 3,945 to 2,714 LOC.
WO-6 (partial):
- Deletes src/labels/png_filenames.rs — was a 72-LOC stub with
detect() returning false, never wired into the PARSERS registry.
project docs doc drift fixes (audited 2026-05-13):
- JUMP_BASE_SECTORS: 256→1024 (64 MB base for UHD, not 8 MB)
- PASSN_DAMAGE_THRESHOLD_PCT: 12→6
- PASSN_SKIP_SECTORS_BASE: 64→32
- MAX_RANGE_SECS=180: replaced by proportional range_sectors × 25,
capped at RANGE_BUDGET_CAP_SECS=1800.
User design call after watching Pass 2 mark ~20 KB as "Cosmetic"
(permanently Unreadable) after just 10 retries within a single pass:
"i think it's good or maybe until all passes are done. then it's
gone."
That contradicts what the multi-pass design promises a user. The
project goal in project docs is "recover 100% of readable data from any
optical disc, automatically." Marking sectors Unreadable after a
SINGLE pass's per-range retry budget gives up on sectors that
subsequent passes might recover — drive reads are stochastic, the
sector that fails 10 times in Pass 2 may succeed on attempt 1 in
Pass 3 after temperature / bus state / prior-read patterns shift.
The patch.rs doc comment already noted ~36% of patch-marked
Unreadable sectors turned out to be readable in re-rip experiments.
Three sites in `Disc::patch` were emitting `PatchItem::Unreadable`
mid-pass:
- backtrack hit damage (line ~2659)
- all-retries-exhausted on a single LBA (line ~2846)
- redundant second mark after the wedge-suspicion log (line ~2970)
All three now emit `PatchItem::NonTrimmed` instead. Failed bytes
stay "maybe" (NonTrimmed) so the next pass gets another shot. The
per-range skip-limit (10) and per-pass wedge-threshold (50) still
bound time-per-pass; they just no longer turn the bytes terminal.
The `PatchItem::Unreadable` variant stays in the enum (with
#[allow(dead_code)]) because the orchestrator-side end-of-recovery
promotion will use it: autorip, after the final retry pass
completes, scans the mapfile and promotes still-NonTrimmed →
Unreadable. That promotion lands in a follow-up commit on the
autorip side — separable from this libfreemkv change.
Loss accounting unchanged: `bytes_pending + bytes_unreadable` is
the "lost or pending" total that `abort_on_lost_secs` consults
(disc/mod.rs:1327). Moving bytes from one bucket to the other
mid-pass doesn't affect whether the rip would abort; it only
affects display (UI shows "Maybe" vs "Cosmetic") and whether
subsequent passes retry the bytes (the actual fix).
Test update: `test_pass_progress_separates_unreadable_from_pending`
was renamed to `test_pass2_leaves_failed_reads_as_pending_not_unreadable`
and rewritten to assert the new invariant — Pass 2 leaves all
failed bytes as bytes_pending (no mid-pass Unreadable promotion).
Original assertions were checking the pre-design-call behavior.
Precommit (cargo +1.86 fmt + clippy + test) green.
Auto-fmt nit on the multi-line map.flush() expression that landed
when the sweep + patch + DiscStream-FrameSource branches were merged
together. No semantic change.
Patch was strictly serial (per-sector recovery: read → seek+write
→ mapfile.record → next). Lifting the write+record onto a consumer
thread lets the drive issue the next per-sector retry while the
previous block's recovered bytes are being committed — small but
real win on damaged discs with many bad sectors, and uniform with
sweep's threading model.
- New PatchSink: Sink<PatchItem> impl in src/disc/patch.rs. Owns
WritebackFile + Mapfile. apply() seeks+writes recovered bytes
and records mapfile state per item; close() runs sync_all and
mapfile.flush.
- Channel depth: WRITE_THROUGH_DEPTH (1). Patch wants minimum
buffering — back-pressure should kick in immediately so the
drive's per-sector retry budget isn't ahead of the writer.
- Disc::patch: keeps every existing recovery decision on the
producer (reverse walk, damage-window skip, NOT_READY pauses,
bridge-degradation handling, wedge exit, range watchdog).
WritebackFile ownership moves to the sink.
Behaviour-preserving: per-sector single-shot read budget unchanged
(BU40N+Initio bridge wedge concern still respected); recovery
algorithm bit-identical.
See (internal)/memory/0_18_redesign.md.
Single contributor: MattJackson.
MattJackson