DriveId::from_drive issues three data-in commands. The two GET CONFIGURATION
calls both clamp on bytes_transferred, with a comment noting it is
device-reported and untrusted. INQUIRY, three lines above them, discarded it
and decoded bytes 8..43 unconditionally.
The buffer is pre-zeroed, so a drive answering GOOD status with a short or
empty data phase — a USB-SATA bridge mid-wedge does exactly this — produced
blank vendor, product and revision strings and a byte 0 of 0x00. Every
platform enumerator gates on raw_inquiry[0] & 0x1F == the optical peripheral
type, and 0x00 is DIRECT ACCESS, so the drive silently disappeared from the
device list instead of reporting that its identity probe had failed. The
operator sees no drive at all rather than an error.
Anything shorter than the SPC-4 standard 36-byte header is now
E9058 DriveInquiryShort, and the buffer is truncated to what actually
arrived so nothing decodes past it. Exactly 36 bytes is still accepted: the
vendor-specific tail is optional.
This is the same defect as the READ CAPACITY short-transfer bug fixed
earlier today, in the same crate, found the same way.
Thirteen agents triaging src/labels and src/disc died on a saturated
machine, leaving 5,836 insertions across 28 files uncommitted in a
worktree. Recovered by 3-way apply onto twelve commits of drift; zero
conflicts. The diff was archived to freemkv-private first, because a
worktree is not a backup and this one had already nearly been lost.
One production change, and it is the right one: mpls_universal::parse
read every playlist off the disc AND converted the entries to labels in
a single function, so the conversion — stream-type mapping, dedup key,
the dense global counters — could only be reached through a synthetic
UDF image. Extracted to build_labels(&[Playlist]), which unit tests can
drive from already-parsed values. Behaviour-preserving: same iteration
order, same skip-on-error.
Two collisions resolved by hand:
A second mod pass_progress_tests, written independently against the
same survivors as the one committed in c610285. Kept mine — it covers
the distinct-counters case and the Progress blanket impl, which theirs
does not — but theirs had three clamp tests mine lacked: good_pct,
bad_pct and pending_pct also clamp an overshoot, and I had only tested
that for work_pct. Merged those in as one test and proved each of the
three clamps load-bearing by removing them individually.
An unused_parens warning in a new fixture.
Method note, recorded because it cost real time: git apply --3way
STAGES its result, so `git diff` reads empty and the tree looks
untouched. I nearly concluded the patch had silently failed. Worse, the
first attempt piped through `head -20`, so `echo exit=$?` reported
head's status rather than git's — the same mistake this audit has
already documented once. Check the real exit status, and check
--cached, not just the working tree.
Test-hardening release, no runtime changes. Adds spec-grounded unit tests
across the silent-corruption surfaces — UDF/MPLS/CLPI/IFO parsing, BD/DVD
title + extent assembly, AACS/CSS key handling, TS/PS demux + codec parsers,
MKV/EBML container output, the mux pipeline, sector prefetch + decrypt
decorator, drive/SCSI sense decoding, label extraction, and core I/O. Each
test is grounded in the format spec or real on-disc behavior and verified to
fail under a targeted source mutation. No behavior changed.
Library-wide review-and-fix pass: tightened AACS keydb/handshake/variant
handling and trailing-partial-unit policy, corrected MPLS mark offset and
added UDF allocation bounds, hardened the mux/codec framing and M2TS paths,
guarded SCSI READ CAPACITY short transfers and unified error mapping, added
overflow guards on untrusted disc input, and made prefetch shutdown
deterministic. Release profile now builds with thin LTO + single codegen unit.
- DriveSession::open() no longer requires profile match — works on any optical drive
- init()/probe_disc() return error gracefully for unknown drives
- find_drives() returns all optical drives (PDT 0x05), not just profile-matched
- has_profile() check for callers
- AACS 2.0: handshake wired into resolve_aacs() — real VID + read_data_key
- DriveId: added raw_gc_010c field for GET_CONFIG 010C response bytes
Features:
- Open drive identification via SPC-4 INQUIRY + MMC-6 GET CONFIGURATION
- 141 supported drives with bundled profiles
- MT1959 platform: unlock, calibrate, raw sector reads
- DriveSpeed enum: BD1x-BD12x, DVD1x-DVD16x
- Field names follow SPC-4 §6.4.2 and MMC-6 §5.3.10 standards
- No proprietary fingerprints — open matching by SCSI fields
- Zero config: profiles compiled into binary
Tested on real hardware: HL-DT-ST BD-RE BU40N 1.03
Matthew Jackson