decrypt:
- decrypt_sectors is now a pure decrypt (apply key, leave plaintext, report
unverified bytes); TS-structure is a separate primitive (is_clean_ts/ps) used
only for key selection and read-verify. The mux passes decrypted bytes through
(the demuxer drops non-conforming packets), ending the NULL-TS conceal loop and
the per-unit key-server refetch storm. Key-proof floor replaces the 75%
supermajority.
recovery:
- Removed the post-read decrypt-verify gate (verify.rs) that mis-aligned the
disc-absolute unit grid against clip-anchored AACS units and false-failed good
clips (e.g. Dunkirk's orphan-CPS clip). Bad sectors are marked by physical read
result; decryptability is proven at scan + mux time.
HD DVD (first-class AACS):
- Role-based candidate-list file sourcing so an HD DVD's /ANY!/ files
(MKBROM.AACS, VTKF000.AACS, CONTENT_CERT.AACS) are found with no disc-type
branch. parse_vtkf parses VTKF000.AACS into the same UnitKeyFile as a BD
Unit_Key_RO.inf, so the shared VUK unwrap applies unchanged. set_unit_base
clip-anchoring. Two decrypt-axis assumptions remain UNVERIFIED-HDDVD-DECRYPT
(no encrypted disc to test).
mux:
- MVC (Blu-ray 3D) track signals unified into one MVCDecoderConfigurationRecord;
release-safe track_vint (3-byte VINT) and pid_index (i32) guards.
hardening:
- Container-aware is_clean / encryption detection; bytes_bad_in_title fail-safe
on a corrupt mapfile; CSS crack gated on DiscFormat::Dvd (HD DVD excluded);
non-vacuous CSS tests; patch NOT_READY/HARDWARE/ILLEGAL_REQUEST/ABORTED
sense-path tests.
- aacs/resolve: a media-keys-only provider missing the VID classifies as
VidUnavailable, not NoMaterial (an MK derives the VUK once the VID
arrives).
- disc/bluray: mark a clip seen only after its .clpi parses, so a
transient parse failure on the first PlayItem cannot suppress the
clip's extents for a later PlayItem referencing it that succeeds.
- disc/patch: log rather than swallow mapfile record/flush failures on a
reverify downgrade, so a failed persist cannot silently mismark a bad
unit good on resume.
- mux/ts: flag a discontinuity when a partial PES is dropped, matching
the other partial-drop paths.
- mux/demux_thread: the no-demuxer branch forwards an empty batch for
early consumer-disconnect detection instead of reading the whole disc.
- io/pipeline: correct the send-timing log (as_secs_f64, not as_micros
printed as ms).
- aacs/derive, aacs/variant, disc/read_error, keysource: comment/doc
accuracy. sector/prefetched, udf: remove dead fields/functions.
- mux/disc: assert unit-aligned read counts in the test.
Surgical fixes (each with a regression test that fails without the change):
mux/mkv.rs, mux/demux_sink.rs: drive the clip-boundary timeline epoch
off the resolved PRIMARY VIDEO track, not the literal stream index 0.
An M2TS/PMT title can list an audio ES before video, so streams[0] may
be audio; a non-video epoch driver ratchets the frontier and inflates
the timeline. mkv cluster-opening falls back to track 0 for audio-only
titles so they still open clusters.
mux/codec/ac3.rs: correct ACMOD_CHANNELS — acmod=5 (3/1) is 4 channels,
not 3 (was undercounting a 3/1 stream); fix the A/52 Table 5.8 doc.
disc/mod.rs: HDMV coding_type 0x91 (Interactive Graphics / menus) no
longer maps to PGS subtitle — it falls through to Unknown so the PMT/STN
walker drops it instead of surfacing a bogus subtitle track.
mux/videomap.rs + mux/mkv.rs: FVI colour now mirrors the MKV muxer's CICP
precedence (measured CICP authoritative; HDR-driven PQ/HLG transfer
override) via a shared cicp_for_video helper, so the two sinks can't
disagree (HDR10 BT.2020 no longer emits SDR transfer 14).
mux/mkvstream.rs: saturating_add on cluster_ts + rel_ts so an adversarial
CLUSTER_TIMESTAMP near i64::MAX can't overflow/panic before the existing
saturating_mul.
mux/timeline.rs: tighten the tail-straggler clamp so a normal new-epoch
non-video frame leading the sparse video frontier by >3s is not demoted
into the previous clip's epoch.
mux/m2ts_mux/mod.rs: re-stamp PCR per video TS packet (mid-PES), not only
at PES boundaries, so a large UHD I-frame can't open a multi-second PCR
gap; modular 33-bit PTS rebasing so a real 90 kHz clock wrap is not
collapsed to PTS 0 (pre-base frames still floor to 0).
io/byte_prefetcher.rs, sector/prefetched.rs: wrap the producer feed loop
in catch_unwind and emit a typed error sentinel on panic, so a mid-stream
producer panic is not read as a clean EOF at the demux boundary (which
would silently truncate the mux).
mux/codec/h264.rs: extend HIGH_PROFILES to the full ISO/IEC 14496-15 set
that mandates the avcC chroma/bit-depth extension (adds 244 et al.).
Doc/comment accuracy: css/mod.rs (50000 sectors, not scrambled-sectors),
aacs/decrypt.rs (decrypt_unit already-clear path), ifo.rs (TT_SRPT at
0xC4), css/lfsr.rs (LFSR0 24-bit; TAB1-then-XOR cipher; real scramble-flag
predicate), disc/read_error.rs (for_sweep does bounded transient retries).
Skipped: keydb.rs SSRF guard (low/latent, no live caller) — a hard
loopback block breaks an existing behavioral test that exercises the
header-EOF path over a loopback server; a clean fix needs a resolver test
seam beyond this surgical pass. The sibling keydb_fetch.rs comment fix is
out of scope (freemkv crate).
- CSS: unlock scrambled-sector reads on enforcing drives via bus-auth
only; classify sense 6F/03 as CSS-locked; early-bail on a fully locked
scan; gate the AACS handshake off DVD discs.
- DVD first-play menu no longer prepended to the feature: read the title
VOBS base from vtstt_vobs (0xC4), not the menu VOBS vtsm_vobs (0xC0).
- Interlaced field-duration (DefaultDecodedFieldDuration) written as a
direct TrackEntry child rather than inside Video, so Windows reports
the correct frame rate.
- Audio channel count read from the AC-3 bitstream; FieldOrder set to
TFF; per-track BPS tags.
- Structured disc diagnostics at --log-level 3; reduced per-operation
log spam.
Drop rx and recycle_tx (now Option fields) before joining the producer
thread in BytePrefetcher::Drop. Without this, a non-EOF source fills the
depth-2 forward channel then spins in send_timeout(POLL_INTERVAL) forever
because rx is never drained; join() deadlocks. Adds a regression test
(drop_endless_prefetcher_joins_cleanly) that directly exercises the path.
- keydb.rs: separate default_path()/no_home_dir() doc blocks; correct the
false XDG lock-step claim (Linux write path uses $HOME, ignores
XDG_CONFIG_HOME; read-side search also checks XDG_CONFIG_HOME).
- io/pipeline.rs: use Release/Acquire on the abandoned flag so a leaked
consumer reliably skips close() on weak memory models (ARM64/POWER),
not just x86 TSO.
- mux/disc.rs: cache the decrypt-loss Arc at construction; lost_bytes()
no longer clones an Arc per frame on the mux hot path.
- disc/dvd.rs: assert display_aspect mapping for both 16:9 (PAL test) and
4:3 (NTSC test).
- mux/resolve.rs: extract css_error_aborts() helper and unit-test the
scrambled-but-uncracked CSS guard (Fix 6) incl. the --raw exemption.
- aacs/keys.rs: add unit tests for mkb_type_raw/mkb_type/mkb_is_uhd and
MkbType (Category C 2.0 UHD, prerecorded 1.0, no-0x10-record None).
- release.yml: publish job needs [verify, test] so a failing test suite
blocks crates.io publication.
Add an io::fsync module with a per-OS split (posix/windows) mirroring the
writeback_file convention, replacing two duplicated dir-fsync copies:
- dir(): POSIX directory fsync; a no-op on Windows, where std cannot open
a directory as a File and the failed open logged a spurious warning on
every mapfile write.
- file_durable(): opens the target read+write before sync_all so the flush
succeeds on Windows, where FlushFileBuffers rejects a read-only handle
with ERROR_ACCESS_DENIED.
Point the mapfile writer at the shared dir() helper.
When finish_with_halt's grace period expires it detaches from the
consumer thread and returns an error to the caller, but the leaked
consumer kept running to completion: once its wedged write syscall
returned it would fall through to sink.close(). For the mux writer
close() finalises the MKV (Cues block + segment-header patch), so a
leaked consumer could finalise — and keep writing to — an output file
the caller had already reported as failed, racing a fresh rip for the
same device over the same path.
Add a shared abandonment flag the consumer polls in its drain loop and
again before close(). finish_with_grace sets it before dropping the
JoinHandle, so the moment the wedged syscall returns the consumer skips
any further apply and skips close() entirely, then exits. This does not
interrupt the in-flight syscall (only its return or process exit can),
but it bounds the damage to the write already in flight instead of a
full finalise of an abandoned file.
Regression tests cover both sides: a consumer leaked past the grace
period skips close(), while one that finishes inside the grace window
still calls close() and finalises normally.
Test-hardening release, no runtime changes. Adds spec-grounded unit tests
across the silent-corruption surfaces — UDF/MPLS/CLPI/IFO parsing, BD/DVD
title + extent assembly, AACS/CSS key handling, TS/PS demux + codec parsers,
MKV/EBML container output, the mux pipeline, sector prefetch + decrypt
decorator, drive/SCSI sense decoding, label extraction, and core I/O. Each
test is grounded in the format spec or real on-disc behavior and verified to
fail under a targeted source mutation. No behavior changed.
Library-wide review-and-fix pass: tightened AACS keydb/handshake/variant
handling and trailing-partial-unit policy, corrected MPLS mark offset and
added UDF allocation bounds, hardened the mux/codec framing and M2TS paths,
guarded SCSI READ CAPACITY short transfers and unified error mapping, added
overflow guards on untrusted disc input, and made prefetch shutdown
deterministic. Release profile now builds with thin LTO + single codegen unit.
Introduces the freemkv mux throughput highway: a three-stage thread
pipeline that replaces the inline single-thread read path for any
file-backed source (ISO and m2ts file URLs both route through it).
Thread A: read + decrypt (PrefetchedSectorSource / BytePrefetcher)
Thread B: M2TS demux (DemuxThread)
Thread C: codec parse (PipelinedPesStream, on caller thread)
Each handoff uses a bounded crossbeam channel with a recycled buffer
pool — no allocations or memcpys in the steady-state hot loop.
Component map:
* io/byte_prefetcher.rs (new) — std::io::Read producer thread with
recycled Vec<u8> pool. Pairs with PrefetchedSectorSource (sector
side) so demux_thread::spawn_zero_copy can wire either upstream.
* sector/prefetched.rs — recycled buffer pool added; into_channels()
peels off the rx/recycle_tx/shell triple for zero-copy demux.
* mux/demux_thread.rs (new) — owns the TsDemuxer/PsDemuxer, runs
feed() on its thread, ships Vec<PesPacket> batches.
* mux/pipelined_stream.rs (new) — the read-side Stream impl. Pulls
packets from the demux thread and runs codec parse on the caller.
* mux/resolve.rs — build_iso_pipeline (public) / build_m2ts_pipeline
(private) assemble the three stages; iso:// and m2ts:// both
return PipelinedPesStream.
* mux/m2ts.rs — collapsed to a write-only sink (Mode::Read deleted;
the read direction lives on the highway now).
* mux/codec/h264.rs — find_start_code uses memchr SIMD memmem::find.
* mux/codec/hevc.rs — tightened frame_data initial capacity.
* mux/ts.rs — boundary-packet handling avoids the per-batch 16 MiB
remainder copy; PesAssembler starts at 16 KiB to dodge the 64-page
first-touch fault tax that the previous 256 KiB pre-alloc paid on
every PES boundary.
* mux/disc.rs — gains DiscStream::new_pipeline + read_pipeline as
the legacy autorip ingress (drive + multipass paths still need
on_event / skip_errors before they migrate to the highway).
* io/file_sector_source/* — per-OS prefetch() syscall hook
(Linux readahead, macOS F_RDADVISE, Windows/other no-op).
* decrypt.rs — FREEMKV_DECRYPT_THREADS renamed to FREEMKV_THREADS;
pool sized to all cores by default.
Measured on rip1 testbed (Civil War UHD, 62 GiB ISO → null://):
60 → 322 MB/s warm cache (old new_pipeline path)
60 → 660 MB/s warm cache (highway path, this commit)
60 → 126 MB/s sustained disk-bound
The IsoSectorReader baseline reader was deleted in favour of
FileSectorSource so the freemkv CLI and autorip exercise the same
read path.
iter13 strace finding: producer thread (mux ISO reader) spends 80%
of wall-clock in state D (NFS RPC wait), doing 207 preads/sec at
103 us each. Pipe is 78 MB/s isolated read; we use ~25 MB/s.
FileSectorSource was using direct per-sector pread (0.21.3 bypass).
That bypass was justified under Phase 2.5 + 0.21.7 producer-poll cap
("32 MiB refill bursts the TCP connection enough to starve the
writer thread"). Both of those conditions are gone now (iter8
baseline: no Phase 2.5, no producer poll cap).
The 4 MiB buffer infrastructure was preserved with #[allow(dead_code)]
in case re-engagement was ever wanted. iter14 just routes the hot
path through buffer_covers + refill + memcpy. Net diff: ~10 LOC of
business logic, 5 unit tests already cover the contract.
Expected: producer's effective read rate jumps from 25 → 60+ MB/s
(matches dd ceiling for 1+ MiB block reads). If consumer side keeps
up, mean mux climbs from 28.7 → 35-50 MB/s. If consumer is now the
cap, we see a clear ceiling around 30-35 and we know where to look
next.
Critically: this change ONLY affects mux-from-ISO. Disc→ISO sweep,
Pass N bad-sector retry, AACS, drive ops, mapfile, recovery — all
untouched (they use DriveSectorSource which is a separate impl).
iter12 revert restored chunk to 128 (iter11 value) by way of the
revert chain. Setting it back explicitly to 32 for iter13. We're
back to iter8 baseline config (no Phase 2.5, 32 MiB chunks,
DONTNEED, no app-level FileSectorSource buffer, channel depth 32).
iter13 is instrumentation: strace the mux thread during a known-dip
to see where time is actually going.
iter11 (128 MiB) crashed to 16.6 mean — chunk-size sweet spot is
firmly 32 MiB. Locking in.
iter12 hypothesis: each NFS write past the file's EOF triggers a
server-side SETATTR (metadata commit) to update the file length.
With ~62 GiB of MKV output and writes at chunk boundaries, that's
thousands of SETATTRs per rip. By using plain fallocate (mode 0)
the file is pre-extended to size_bytes up front; subsequent writes
overwrite the pre-extended region with no metadata ops.
Adds high_water tracking + truncate_at_sync so we ftruncate down
to actual content size if the size hint was an overestimate.
iter9 (64 MiB on top of no-P2.5) regressed -1.2 from iter8. 32 MiB
remains best on the no-P2.5 path. Net iter10 = iter8 minus DONTNEED
(via the prior commit re-applying f4a881b).
iter8 (Phase 2.5 disabled, 32 MiB chunks) hit 28.7 MB/s mean
— 1.3 MB/s below R2 floor. Without Phase 2.5, WAIT_AFTER blocks the
mux thread directly once per chunk. Halving the WAIT_AFTER frequency
(32 → 64 MiB chunks) should raise the mean without changing the
underlying architecture.
iter7's 64 MiB chunks didn't help (23.1 vs iter4's 24.0). Reverting
to 32 MiB so iter8 differs from iter4 by exactly one variable:
Phase 2.5 disabled / direct passthrough mux thread.
Test question: is Phase 2.5 helping at all? If iter8 mean > iter4,
Phase 2.5 has been a net negative on this rig the whole time. If
iter8 mean < iter4, Phase 2.5 is doing what it claimed.
iter6 (8 MiB chunks) regressed mean -8.2 MB/s vs iter4 (32 MiB).
Trend: bigger = better in this workload, against the page-age
theory. Try 64 MiB to see if fewer/larger syncs raise mean further.
0.21.14 went to 128 MiB and was reverted; 64 is between.
iter5 (256-frame channel) regressed -1.8 MB/s vs iter4. Reverting to
32 frames.
iter4 sample pattern shows clear ~30 s oscillation (peak 45 MB/s →
dip 3 MB/s → recovery). Matches Linux vm.dirty_expire_centisecs
default (30 s). 32 MiB chunks at 25 MB/s issue WAIT_AFTER every
~1.3 s, which can't outrun the kernel's own page-age limit, so
pages buildup then flush in bursts. Smaller 8 MiB chunks
(WAIT_AFTER every ~0.33 s) should keep the dirty-page set young
and eliminate the periodic flush-burst dip.
iter4 measurement (Phase 2.5 + DONTNEED, no FileSectorSource buffer)
showed mean 24.0 MB/s but with dips to 2.8 MB/s. Channel at 32 frames
(~1.6 MiB at 50 KB/frame avg) drains in <100 ms on any producer pause,
starving the consumer.
256 frames = ~12 MiB ≈ 3-4 sec of consumer drain at the rolling-avg
floor we want to hit. Should coast through producer micro-stalls
without idle gaps.
iter1 baseline (Phase 2.5 + DONTNEED restored) measured at 18.4 MB/s
mean on Civil War remux — well below the rig's 37 MB/s concurrent-r+w
ceiling. Per-sector pread is the producer-side bottleneck: ~50us per
pread on NFS = ~19k preads/sec = effective ceiling near what we see.
The 0.21.3 bypass commit cited an A/B test showing the buffer hurt
throughput on NFS bidirectional workloads. That test was taken under
the 0.21.7 producer polling cap; once the cap is gone, the cap was
the bottleneck, not the buffer. Same invalidation pattern as the
0.21.5 Phase 2.5 revert.
Restored the buffered path. DONTNEED page-cache eviction from 0.21.6
stays intact.
Three coupled changes that together meet the "stable max throughput
on any medium" bar:
1. Remove `is_nfs` from `skip_wait`. WAIT_AFTER runs on every medium
now. The `bounded_syscall` 30s safety net (already in place) covers
the wedged-FS case generically — no need to predict NFS-hangs at
compile time. Re-applies the 0.21.12 fix that landed the flat
25 MB/s on NFS in the first place.
2. Drop the `posix_fadvise(DONTNEED)` calls after WAIT_AFTER. Bounded
*dirty* pages (the actual invariant) does not require evicting
*clean* pages. DONTNEED was forcing read-modify-write on any
in-window seek-then-write — exactly the pattern matroska
cluster-size backpatches produce. Empirical 2026-05-15: write side
of mux fed NFS at 43 MB/s while the file grew at 25 MB/s, an 18
MB/s overhead almost certainly composed of those RMW cycles. The
kernel reclaims clean pages under LRU when memory is actually
needed — we don't have to ask.
3. Replace `detect_nfs(fd) -> bool` with `detect_storage_class(fd)
-> (StorageClass, chunk_bytes_seed)`. Medium detection happens
*once* at construction and produces *one* output: the initial
`chunk_bytes` seed for the autotuner. NFS gets 64 MiB (commit ack
~10-30 ms; needs bigger chunks to amortize); other media use the
caller's hint. No hot-path branches on medium. The autotuner drives
all subsequent decisions from measured WAIT_AFTER p95 latency,
identically on every (OS, FS) combination.
Module-level doc rewritten to match: no more "NFS escape hatch", no
"is_nfs" framing. The whole writeback module is now medium-agnostic
except for one labelled detection point.
The pipeline's adaptive autotuner grows chunk_bytes only when the p95
WAIT_AFTER latency exceeds 200 ms. On NFS, sync_file_range(WAIT_AFTER)
translates to an NFS COMMIT RPC whose ack lands within ~10 ms — so
the autotuner never triggered and the pipeline stayed at the original
32 MiB initial value forever.
That capped sustained mux throughput by paying NFS COMMIT-RPC overhead
roughly once per second of writes. Bidirectional mountstats on rip1
2026-05-15: write side 29 MB/s (RTT 30 ms but exec_time 257 ms — 220 ms
queue/serial waiting) while concurrent dd on the same disk shows
~91 MB/s write + ~65 MB/s read available.
128 MiB initial drops COMMIT cadence 4x while keeping the bounded-
cache invariant intact (worst-case dirty pages ~2 x chunk = 256 MiB,
well under vm.dirty_ratio = 6.6 GB on the 32 GB rig). The adaptive
autotuner can still grow further (up to 256 MiB) or shrink if
WAIT_AFTER ever measures sub-20 ms p95 on faster media.
The WritebackPipeline's WAIT_AFTER + posix_fadvise(DONTNEED) dance
keeps dirty pages bounded at ~2 × chunk_bytes by waiting for each
chunk's writeback to commit before issuing the DONTNEED hint to drop
it from cache. The original 0.18-era design unconditionally skipped
this on NFS on the premise that "NFS clients have their own buffering
and commit semantics that handle dirty-page bounds without us forcing
the issue."
Empirically wrong. On unraid-1 NFS the kernel client buffers dirty
pages up to vm.dirty_ratio (default 20% of RAM = ~6.6 GB on the rip1
host) before the kernel forces writeback and throttles app writes.
Result on 0.21.11 mux measured 2026-05-15: mux throughput cycled
between ~45 MB/s (cache absorbing) and ~7 MB/s (cache draining under
throttle) on a ~100 s period — exactly the burst-flush pathology this
pipeline was built to fix, but disabled on the medium it actually
runs on. /proc/meminfo Dirty: column climbed lockstep with mux
write rate during the slow half of every cycle, confirming the cause.
The original safety concern — `sync_file_range(WAIT_AFTER)` hanging
indefinitely on a wedged NFS server — is already handled by
`wait_after_with_timeout`'s `bounded_syscall` wrapper (30 s deadline).
If a real WAIT_AFTER call exceeds the deadline the pipeline flips to
the `degraded` state and skips WAIT_AFTER + DONTNEED for the rest of
its life — same effect as the old NFS branch, but only triggered when
something is genuinely broken rather than as a blanket exception.
This change is medium-agnostic: every medium goes through the same
path now, every medium gets the same safety net, and the
ADAPTIVE_WINDOW chunk-size autotuner (lines 226-255 — measures p95 of
WAIT_AFTER and resizes between 4 MiB and 256 MiB) finally activates
on NFS where previously it was dead code. Slow medium auto-grows
chunks to amortise per-chunk overhead; fast medium auto-shrinks to
keep cache pressure tight; nothing in the code special-cases the
filesystem type.
`is_nfs` is still detected (for logging + observability) but no
longer keys `skip_wait`. Module doc + startup log line updated to
match.
Pre-coalescing the Phase-2.5 writer thread issued one `file.write_all`
syscall per `Cmd::Write` dequeued. The mux side calls
`WritebackFile::write_all(buf)` per PES frame, typically 30-200 KB.
On NFS that translates to one RPC per syscall, capping per-thread
throughput at `(wsize / rtt) × inflight` — well below what the same
disk delivers under a 1 MiB `dd oflag=direct` workload (empirical
2026-05-15: dd 71 MB/s vs mux ~25 MB/s sustained, with instantaneous
samples bursting 7→108 MB/s as the kernel page cache filled and
drained on its own cadence).
Coalesce instead: dequeue drains consecutive `Cmd::Write` items off
the ring up to a 1 MiB byte budget, returns them as
`DequeuedWork::Writes(Vec<Vec<u8>>)`, and the run loop concatenates
into one contiguous buffer and issues a single `file.write_all`.
Non-write commands (Seek, Flush, SyncAll, Finish) break the run and
are returned one at a time as `DequeuedWork::Other`, preserving their
ordering relative to the writes.
Single-buffer fast path avoids the concat allocation when only one
write is in the queue at dequeue time. A single oversize write (e.g.
the rare matroska cluster larger than 1 MiB) is admitted alone so it
still makes progress — the kernel splits internally.
This is generic across mediums: bigger app writes are at-least-as-
good on local SSD, HDD, or NFS. On fast storage the ring rarely fills
so coalescing is mostly a no-op; on slow storage with significant
per-RPC overhead it materially improves throughput.
Tests in `tests/` (write_then_drop_persists_bytes, sync_all_drains,
seek_then_patch_roundtrip, flush_is_observed_in_order) still pass —
ordering and durability semantics are unchanged.
The depth was conservative because pre-0.21.8 a full sync_file_range
stall on NFS could traverse this channel and pin the producer. With
0.21.8's restored Phase 2.5 writer thread + 128 MiB byte-bounded ring
inside WritebackFile, every blocking syscall happens downstream of
this channel — never on it. The original "smaller buffer reduces
backpressure risk" rationale no longer applies.
Empirical (2026-05-15 Civil War UHD remux on 0.21.8): 30.9 MB/s
sustained but instantaneous samples spanning 9-53 MB/s, stdev 9.3.
Distribution clusters 52% of samples in 25-35 MB/s but has a long
9-15 MB/s tail. The tail corresponds to brief stalls in the matroska
builder when the sink momentarily lags — exactly the case a deeper
inter-thread channel covers. 32 frames at PES-frame sizes is still
well under a megabyte of additional memory, so the cost is zero.
Reverts 523af46. That revert was made on the premise that Phase 2.5
caused a ~60% mux throughput regression on NFS bidirectional workloads.
The premise was wrong: at the time of measurement the producer was
capped at ~8 MB/s by a 50 ms thread::sleep poll in
Pipeline::send_with_halt (fixed in v0.21.7's io/pipeline change), so
the comparison was measuring the polling cap on both sides.
With the polling cap removed, direct passthrough exposes the kernel's
default dirty-page writeback pathology on NFS: writes accumulate, the
kernel periodically bursts a flush, app writes block for the burst.
Observed empirically on Civil War UHD remux 2026-05-14: 5-45 MB/s
spiking around a ~21 MB/s sustained mean, dominated by burst-flush
back-pressure cycles.
Phase 2.5 decouples the mux thread from the file syscall:
* mux writes complete instantly into a 128 MiB byte-bounded SPSC ring,
* a dedicated writer thread executes the real File writes, seeks,
and sync_file_range calls; can sit in a kernel burst without
blocking the mux pipeline,
* backpressure via Condvar notify/wait, no polling primitive,
* the ActiveClusterBuffer fast-path preserves the original MKV
cluster-backpatch optimisation so in-window seeks don't drain
the current writeback chunk.
Halt-safety is preserved: every blocking writeback syscall on the
writer thread still routes through bounded_syscall with a 60 s
deadline. A wedged NFS server cannot trap the writer indefinitely;
the muxer keeps queueing into the ring; the kernel page cache and
the ring together absorb the stall.
The halt-aware send loop polled try_send on a 50 ms sleep slice when
the channel was full. That capped producer throughput at 1 / 50 ms =
20 frames/sec ≈ 1 MB/s at typical PES frame sizes — way below NFS,
let alone local SSD/NVMe. Multi-day diagnostic 2026-05-13/14 surfaced
it as the root cause of the 18 → 3 MB/s mux throughput regression on
0.21.x.
Replaced std::sync::mpsc::sync_channel with crossbeam_channel::bounded
and switched send_with_halt to send_timeout. Producer now BLOCKS on
consumer drain (kernel-wakeup) instead of polling — the timeout slice
(250 ms) only fires when the producer is waiting for stop signal
observation, never on the happy path.
Result: no throughput cap from this primitive at any medium speed.
Mux is bounded by actual storage / network bandwidth, not by our
channel implementation.
Same fix needs to land in autorip's mux.rs producer-side
sync_channel (separate sibling commit).
Documented in (internal)/memory/
feedback_send_with_halt_poll_throttle.md.
Empirical: isolated NFS read 70 MB/s + write 93 MB/s on the rip1 setup
right now, but mux throughput pinned at 2.7 MB/s on 0.21.5. NOT
environmental — code regression.
Root cause: Phase 1 silently dropped the read-side
posix_fadvise(POSIX_FADV_DONTNEED) eviction that the pre-Phase-1 (0.20.7)
hot path had. Without it, an 85 GB streaming ISO read pins the entire
file in the kernel page cache, starving concurrent MKV writeback. 0.21.2
then also dropped the POSIX_FADV_SEQUENTIAL hint on the same theory,
compounding the regression.
Restored both, per-OS split:
- linux: posix_fadvise(SEQUENTIAL) at open + posix_fadvise(DONTNEED)
on consumed 32 MiB windows
- macos: F_RDADVISE hint at open (kept); drop_window no-op (macOS unified
buffer cache less prone to the pin pathology)
- windows / other: both no-op stubs
Target mux speed restored to 20+ MB/s (per concurrent-NFS math:
70/2 read × 0.73 MKV/ISO ratio ≈ 25 MB/s achievable).
Matthew Jackson