1. HEVC CRA->BLA false-trigger on 33-bit PTS wraparound
(src/mux/codec/hevc.rs): the clip-boundary auto-detect compared the
RAW 33-bit PES PTS against the high-water mark, so a single-clip title
crossing 2^33->0 (~26.5h) false-armed pending_clip_boundary and rewrote
a legitimate in-clip CRA(21)->BLA_W_LP(16), dropping valid RASL pictures
(visible corruption) and breaking the single-clip byte-identical
guarantee. Now unwrap the PTS onto a monotonic 64-bit timeline first
(a near-full-period backstep is a wrap: add 2^33, update the watermark,
do not arm). Regression test cra_after_33bit_pts_wrap_not_rewritten;
the genuine-clip-join test still passes.
2. Single-pass recovery read bypassed the transport-failure abort
(src/mux/disc.rs): the line-442 short-circuit only inspected the 10s
read res. A transport failure (status 0xFF, wedged USB bridge) on the
60s recovery read fell into the skip_errors branch and zero-filled/
advanced, marching the disc at one bridge-recovery per probe
(run-forever, hard rule #2). Re-check the recovery error for
is_scsi_transport_failure() before the skip block and abort with
Error::DiscRead. Test transport_failure_on_recovery_read_aborts_even_with_skip_errors.
3. Recovery-read SUCCESS branch had no coverage (src/mux/disc.rs tests):
added RecoverableReader (errors when recovery=false, succeeds when
recovery=true) and test recovery_read_success_muxes_recovered_data_no_skip
driving fill_extents to the size-1 bottom-out and asserting the recovered
data is muxed (counters advance, no skip).
4. TrueHD channel-correction probe omitted set_unit_base
(src/disc/mod.rs correct_truehd_channels): the probe read via a
DecryptingSectorSource without anchoring the AACS unit-alignment gate,
so it degraded to absolute start_lba % 3 and returned DecryptFailed on a
non-3-aligned extent, silently understating Atmos/7.1 as 5.1. Now call
set_unit_base(ext.start_lba) before the probe read (no-op for CSS/None).
5. is_unit_aligned lba<unit_base latent trap (src/aacs/decrypt.rs):
wrapping_sub mis-gated when lba < unit_base (2^32 == 1 mod 3). Switched
to saturating_sub (clamps offset to 0, a unit boundary) and pinned the
contract with is_unit_aligned_lba_below_base_is_well_defined plus
is_unit_aligned_relative_to_base.
cargo +1.86 fmt --check / clippy -D warnings / test --tests all green.
Fixes the "Silence of the Lambs" R2 PAL wrong-substream rip: the feature's
IFO declares one 5.1 AC-3 stream, but the scan assigned it the on-wire
sub-stream id 0x80 purely by per-codec ordinal (ifo::assign_audio_sub_stream_ids).
On this disc the physical 0x80 carries the 2.0 down-mix and the 5.1 main mix
lives at a different 0x8x sub-stream, so the rip muxed 2.0 while labelling it
"Dolby Digital 5.1" (the acmod fixup in mkv.rs then corrected only the Channels
element, surfacing the mismatch as the "IFO claimed 6 but acmod says 2" warning
— too late to re-route).
New src/disc/dvd_audio_probe.rs probes each physical AC-3 sub-stream's real
channel count from the head of the feature (the acmod/lfeon of its first frame
after the 0x0B77 sync) and re-routes each IFO-declared AC-3 stream onto the
physical sub-stream whose actual channel count matches the declared count,
instead of trusting the ordinal. Wired into both mux demux paths
(DiscStream::new and resolve::build_iso_pipeline) over the decrypting reader,
so it works on CSS discs and the autorip ISO-remux path alike. Bounded
512-sector best-effort read; an empty/unreadable probe degrades to the original
ordinal mapping (no regression on normal discs).
The cell selection is left unchanged: the feature's cell 0 (cat=0x02, 302.4s)
is chapter 1 of the movie (matches MakeMKV's chapter map and 1h53 duration
exactly), so it must NOT be dropped — the perceived "wrong video at the start"
was the wrong 2.0 audio over the opening, the same root cause.
Diagnostics (--log-level 3): new tag=dvd.substream rows dump the ACTUAL acmod
channel count of each physical 0x8x sub-stream read from the VOB, and the
per-cell tag=dvd.cell verdict now spells out the keep/skip reason. With the
existing tag=dvd.aattr (IFO declared sub_id + channels) a bug log alone now
shows whether the ordinal 0x80 really carries the declared layout — no disc
needed to diagnose this class.
expose ac3::find_ac3_sync as pub(crate) for the probe.
The AACS unit-alignment gate measured `lba % 3` against absolute disc LBA 0,
but aligned units are anchored at each clip's encrypted-region start. A clip
whose start_lba is not 3-aligned had its readable units wrongly rejected with
"Decryption failed" (the big-title-only failure on some Blu-rays). One
canonical clip-anchored helper (`aacs::is_unit_aligned`) is now the single
source of truth for the decrypt-on-read gate; both mux read paths set the
per-extent `unit_base = start_lba` via a new `SectorSource::set_unit_base`.
Also moves key *mechanism* into the library: the encrypted sample reader
(`read_encrypted_units`) and the candidate-key resolution loop
(`resolve_and_apply`) now live here, so a key source is purely a lookup.
Regression test covers a clip based at a non-3-aligned LBA.
Single-pass disc->MKV has no Pass N, so its read bottom-out now issues one
bounded recovery read (recovery=true, ~60s ECC) before skipping or aborting,
matching the multipass patch. Fixes a transient/marginal sector surfaced as a
read failure direct-to-MKV while multipass recovered it. One read, not a loop
(hard rule #2); recovered data is used so no bogus-status hole reopens.
- CSS: unlock scrambled-sector reads on enforcing drives via bus-auth
only; classify sense 6F/03 as CSS-locked; early-bail on a fully locked
scan; gate the AACS handshake off DVD discs.
- DVD first-play menu no longer prepended to the feature: read the title
VOBS base from vtstt_vobs (0xC4), not the menu VOBS vtsm_vobs (0xC0).
- Interlaced field-duration (DefaultDecodedFieldDuration) written as a
direct TrackEntry child rather than inside Video, so Windows reports
the correct frame rate.
- Audio channel count read from the AC-3 bitstream; FieldOrder set to
TFF; per-track BPS tags.
- Structured disc diagnostics at --log-level 3; reduced per-operation
log spam.
- keydb.rs: separate default_path()/no_home_dir() doc blocks; correct the
false XDG lock-step claim (Linux write path uses $HOME, ignores
XDG_CONFIG_HOME; read-side search also checks XDG_CONFIG_HOME).
- io/pipeline.rs: use Release/Acquire on the abandoned flag so a leaked
consumer reliably skips close() on weak memory models (ARM64/POWER),
not just x86 TSO.
- mux/disc.rs: cache the decrypt-loss Arc at construction; lost_bytes()
no longer clones an Arc per frame on the mux hot path.
- disc/dvd.rs: assert display_aspect mapping for both 16:9 (PAL test) and
4:3 (NTSC test).
- mux/resolve.rs: extract css_error_aborts() helper and unit-test the
scrambled-but-uncracked CSS guard (Fix 6) incl. the --raw exemption.
- aacs/keys.rs: add unit tests for mkb_type_raw/mkb_type/mkb_is_uhd and
MkbType (Category C 2.0 UHD, prerecorded 1.0, no-0x10-record None).
- release.yml: publish job needs [verify, test] so a failing test suite
blocks crates.io publication.
Fix three DVD video-attribute bugs surfaced by a PAL disc detected as
NTSC:
- PAL/NTSC: parse video_format from VTS_V_ATR bits 5-4, not bits 1-0
(the old mask read permitted_df, so PAL 576i/25fps was mis-detected
as NTSC 480i/29.97). Named consts replace the magic bit positions.
- Anamorphic aspect: write MKV DisplayWidth/Height from the disc's
display_aspect (16:9 720x576 -> 1024x576) instead of square pixels,
so 16:9 DVDs no longer render as 4:3.
- Colour: stamp SD colorimetry (PAL=BT.470BG, NTSC=SMPTE-170M) instead
of BT.709 (HD).
Adds VideoStream.display_aspect (threaded through every muxer) plus
TvSystem/DvdAspect/ColorSpace plumbing, with regression tests. Removes
the deprecated Disc mux set_halt bridge (use with_halt).
When a scrambled AACS unit fails to decrypt under every available key
(a missing/wrong CPS sub-key, or a marginal unit that fails the TS-sync
verify), decrypt_sectors restored the original encrypted bytes and
returned Ok with no signal. Those still-encrypted bytes flowed to the TS
assembler, which silently dropped the non-syncing packets with no loss
counter. The only loss accounting was DiscStream's read-error zero-fill
path, so mux reported lost_video_secs=0 for decrypt-dropped content and
the abort gate accepted the rip even under abort_on_lost_secs=0. A rip
missing real video/audio segments was published as a perfect success.
decrypt_sectors now returns the number of bytes in scrambled units that
no key could decrypt. DecryptingSectorSource accumulates that into a
shared counter exposed via decrypt_loss(); both mux pipelines fold it
into lost_bytes() — the inline DiscStream path directly, and the
file-backed highway via PipelinedPesStream sharing the producer's
counter. Restore-to-original is unchanged, so clear nav-files are never
corrupted; metadata-probe callers that don't read the counter are
unaffected. Adds regression tests at the decrypt and decorator layers.
DiscStream skips a whole AACS unit (3 sectors = 6144 bytes) per
read-error event, but only the skip-event count was exposed. Loss
estimates built from errors*2048 therefore undercounted AACS loss ~3x.
Add a lost_bytes field that accumulates the actual zero-filled byte
count at each skip, expose it via a new Stream::lost_bytes() accessor
(default 0; DiscStream and CountingStream override), so consumers can
scale lost-video time by real bytes lost rather than the event count.
Regression tests assert the AACS path records 6144 B/event (and
exceeds the errors*2048 undercount) while the align=1 path records
2048 B/event.
A direct disc://→mkv:// single-pass rip drives fill_extents in
skip_errors mode. On a read failure it shrank the batch, retried, and
once bottomed out zero-filled + skipped the unit and continued. A SCSI
transport failure (status=0xFF) is a USB-bridge crash, NOT a skippable
bad sector: the bridge is wedged and every subsequent read fails the
same way. So the loop marched the entire disc at one ~15s bridge-
recovery per probe, producing no MKV — the user-reported 'hundreds of
0x28/0xff warnings, runs forever, Movie.mkv never created'.
Fix: short-circuit to an error on transport failure before any
shrink/skip, even under skip_errors — mirroring the multipass sweep's
transport-failure rule in read_error::handle_read_error. The CLI
surfaces it so the user power-cycles the drive or switches to multipass
recovery. Regression test asserts exactly one read is issued and no skip
is counted (no infinite march).
Library-wide review-and-fix pass: tightened AACS keydb/handshake/variant
handling and trailing-partial-unit policy, corrected MPLS mark offset and
added UDF allocation bounds, hardened the mux/codec framing and M2TS paths,
guarded SCSI READ CAPACITY short transfers and unified error mapping, added
overflow guards on untrusted disc input, and made prefetch shutdown
deterministic. Release profile now builds with thin LTO + single codegen unit.
Subtitle/DVD output-corruption + stream-mapping coverage fixes.
1. DVD subtitle/audio track-mapping collision (CRITICAL). The PS path
routed 0xBD private-stream packets to a track via (sub_id & 0x1F)+1,
so VobSub subtitle sub-id 0x20+j aliased audio track j+1: subtitle
PES was fed to the AC-3 parser and the real subtitle track got
nothing. Route by the canonical DVD PID instead via a new
PsPacket::dvd_pid() that mirrors scan_dvd_titles' PID assignment
(video 0xE0, audio 0xBD00+i, subtitle 0x20+j), then look up the
track in pid_to_track. Fixed identically at all three sites
(pipelined_stream consume_ps, disc.rs live feed, disc.rs EOF flush).
Unmappable/unmapped packets now WARN instead of silently dropping.
2. PGS flush() missing. PgsParser inherited the no-op default flush, so
the last subtitle of every PGS track (emitted only when a following
PCS arrives) was dropped at EOF. Implemented flush() to drain the
pending display set (duration_ns: None for the trailing block).
3. DVD VobSub multi-PES SPU not reassembled. A subpicture unit larger
than one PES spans multiple PES (only the head carries a PTS).
DvdSubParser is now stateful: it buffers per sub-stream until the
leading 2-byte SPU_size is satisfied, inherits the head PTS, and
emits one Frame. flush() drains a truncated trailing SPU at EOF.
4. One-table hygiene. scan_streams had a duplicate stream_type->Codec
table that had drifted from Codec::from_coding_type (missing 0x80
LPCM, 0x85 mapped to DTS-HD MA vs HR, etc.). scan_streams now uses
from_coding_type plus a new Codec::kind()/CodecKind category split,
so the two mappings can never diverge. Silent drops in
scan_streams and bluray STN parsing now WARN with PID + type.
Tests: dvd_pid mapping + subtitle/audio collision regression, PGS
final-subtitle flush, VobSub multi-PES reassembly + EOF flush,
scan_streams 0x80 LPCM via from_coding_type.
Audit-driven fixes (rounds 1–3):
- hevc: correct hvcC profile/level SPS offsets (HEVC has a 2-byte NAL header)
- mkv: map all DTS variants to the registered A_DTS codec id; force a new
cluster before the i16 cluster-relative timestamp can overflow
- ebml/mkvstream: bound untrusted EBML sizes (no multi-GB allocs); reject
uint>8 (was an OOB panic) and non-{0,4,8} float widths (were a desync)
- ts: skip PES-header bytes that span a TS packet boundary; add the PMT
section_len/prog_info_len bounds the PAT parser already had
- ac3: preserve a 0x0B77 syncword split across a PES boundary; cap buffer
- dts: validate each next-core boundary by decoded core size (a 0x7FFE8001
pattern inside XLL payload no longer false-splits/drops the lossless
extension); reject sub-minimum core frames; fix forced-emit PTS base
- lpcm: DVD program-stream PCM no longer double-strips the BD LPCM header
- vc1/mpeg2: do not emit a parameter-set-only PES as a standalone frame
- pgs/truehd: cap the pending reassembly buffer (parity with ac3/dts)
- aacs: ts_syncs_intact uses the exact packet count
- prefetched: capacity-guard the recycled-buffer set_len
- Cargo.toml: exclude project docs from the published crate
Convergence: a third independent audit pass found no remaining material
(CRITICAL/HIGH/MEDIUM) issues. Full precommit (fmt + clippy -D + tests,
Rust 1.86) green.
DTS-HD MA/HRA access units on Blu-ray are a DTS core frame (sync
0x7FFE8001) followed by one or more DTS extension substreams (sync
0x64582025) carrying the lossless audio. Ground-truthing the Dunkirk
ISO showed the m2ts demuxer hands these out as SEPARATE PES packets on
the same PID: one core PES (exactly core-sized, nothing trailing), then
the extension substreams in following PES packets with their own later
PTS.
The old DtsParser emitted one frame per PES the moment a core frame was
complete, and dropped any PES with no core sync. So every core became a
core-only (lossy) frame and the extension PES packets were discarded as
junk -- silently downgrading the track to lossy DTS core (1557 kb/s CBR,
16-bit) instead of DTS-HD MA (VBR, 24-bit lossless).
Rewrite the parser to assemble across PES boundaries: an access unit
runs from its core sync up to (but not including) the NEXT core sync, so
the core plus every following extension substream stays together. Add a
CodecParser::flush() (default empty) called at end-of-stream by both the
pipelined and inline DiscStream mux paths to drain the final buffered
unit. A 64 KiB cap guarantees forward progress and never stalls if a
boundary can't be found.
Validated on the rip1 testbed: Dunkirk eng+ger and Fight Club eng main
audio now ffprobe as profile=DTS-HD MA (Fight Club eng at 24-bit), with
VBR packet sizes (~2716-2788 B) well above the old fixed 2012 B lossy
core. Genuinely-lossy DTS dub tracks are left untouched.
- MkvTrack::audio emits A_DTS/MA, A_DTS/HR, A_DTS per the DTS family
instead of mislabelling everything as A_DTS. Plex transcoder and
strict hardware decoders reject DTS-HD MA payload under a plain
A_DTS track.
- PgsParser is now stateful: pairs display PCS with the following
empty PCS to compute a duration. Frame::duration_ns + PesFrame::duration_ns
carry it through; MkvMuxer::write_frame gains a final Option<u64>
parameter that emits BlockGroup + BlockDuration when set. Fixes
subtitle bitmaps lingering past their intended end-time.
* `PrefetchedSectorSource::new_with_events` adds an optional
`event_fn` callback that fires `BytesRead` after every successful
batch from the producer thread. The original `new()` becomes a
thin no-events wrapper. Lets autorip wire the highway and still
get UI progress events without polling the consumer side.
* `build_iso_pipeline` grows an `event_fn` arg so the autorip
multipass mux can pipe BytesRead straight through to its progress
UI.
* Stream trait gains a default `errors() -> u64` method (= 0) so
Box<dyn Stream> callers (autorip's mux loop) can read the
skip-on-error counter without downcasting. `DiscStream` overrides
to return its `errors` field.
* Delete `DiscStream::new_pipeline` and the pipeline-mode fields
(`demux_thread`, `demux_rx`) plus the `read_pipeline` helper.
All pipeline construction now goes through
`PipelinedPesStream` via `build_iso_pipeline`; `DiscStream`
becomes the single-thread-only inline path used by the drive
single-pass read.
* `lib.rs` re-exports `build_iso_pipeline`.
Introduces the freemkv mux throughput highway: a three-stage thread
pipeline that replaces the inline single-thread read path for any
file-backed source (ISO and m2ts file URLs both route through it).
Thread A: read + decrypt (PrefetchedSectorSource / BytePrefetcher)
Thread B: M2TS demux (DemuxThread)
Thread C: codec parse (PipelinedPesStream, on caller thread)
Each handoff uses a bounded crossbeam channel with a recycled buffer
pool — no allocations or memcpys in the steady-state hot loop.
Component map:
* io/byte_prefetcher.rs (new) — std::io::Read producer thread with
recycled Vec<u8> pool. Pairs with PrefetchedSectorSource (sector
side) so demux_thread::spawn_zero_copy can wire either upstream.
* sector/prefetched.rs — recycled buffer pool added; into_channels()
peels off the rx/recycle_tx/shell triple for zero-copy demux.
* mux/demux_thread.rs (new) — owns the TsDemuxer/PsDemuxer, runs
feed() on its thread, ships Vec<PesPacket> batches.
* mux/pipelined_stream.rs (new) — the read-side Stream impl. Pulls
packets from the demux thread and runs codec parse on the caller.
* mux/resolve.rs — build_iso_pipeline (public) / build_m2ts_pipeline
(private) assemble the three stages; iso:// and m2ts:// both
return PipelinedPesStream.
* mux/m2ts.rs — collapsed to a write-only sink (Mode::Read deleted;
the read direction lives on the highway now).
* mux/codec/h264.rs — find_start_code uses memchr SIMD memmem::find.
* mux/codec/hevc.rs — tightened frame_data initial capacity.
* mux/ts.rs — boundary-packet handling avoids the per-batch 16 MiB
remainder copy; PesAssembler starts at 16 KiB to dodge the 64-page
first-touch fault tax that the previous 256 KiB pre-alloc paid on
every PES boundary.
* mux/disc.rs — gains DiscStream::new_pipeline + read_pipeline as
the legacy autorip ingress (drive + multipass paths still need
on_event / skip_errors before they migrate to the highway).
* io/file_sector_source/* — per-OS prefetch() syscall hook
(Linux readahead, macOS F_RDADVISE, Windows/other no-op).
* decrypt.rs — FREEMKV_DECRYPT_THREADS renamed to FREEMKV_THREADS;
pool sized to all cores by default.
Measured on rip1 testbed (Civil War UHD, 62 GiB ISO → null://):
60 → 322 MB/s warm cache (old new_pipeline path)
60 → 660 MB/s warm cache (highway path, this commit)
60 → 126 MB/s sustained disk-bound
The IsoSectorReader baseline reader was deleted in favour of
FileSectorSource so the freemkv CLI and autorip exercise the same
read path.
WO-2 (delete SectorReader trait):
- The 0.18 trait split into SectorSource (read-only) and SectorSink
(write-only) is final; the legacy SectorReader alias was a bridge.
- Renames every internal &mut dyn SectorReader (~25 sites) to
&mut dyn SectorSource. The trait method capacity() becomes
capacity_sectors() with a default of 0 (preserves SectorReader's
default-0 behavior).
- Deletes the SectorReader trait, its blanket-to-Source bridge, and
the FileSectorReader type alias. Adds explicit forwarding impls
for Box<dyn SectorSource> and &mut dyn SectorSource so generic
decorators like DecryptingSectorSource<S: SectorSource> compose.
WO-3a (extract Disc::patch):
- Moves Disc::patch (1230 lines) and bytes_bad_in_title from
disc/mod.rs into disc/patch.rs as a split inherent impl. Zero
behavior change — pure mechanical relocation. disc/mod.rs drops
from 3,945 to 2,714 LOC.
WO-6 (partial):
- Deletes src/labels/png_filenames.rs — was a 72-LOC stub with
detect() returning false, never wired into the PARSERS registry.
project docs doc drift fixes (audited 2026-05-13):
- JUMP_BASE_SECTORS: 256→1024 (64 MB base for UHD, not 8 MB)
- PASSN_DAMAGE_THRESHOLD_PCT: 12→6
- PASSN_SKIP_SECTORS_BASE: 64→32
- MAX_RANGE_SECS=180: replaced by proportional range_sectors × 25,
capped at RANGE_BUDGET_CAP_SECS=1800.
The 0.18 trait split into FrameSource (read-only) and FrameSink
(write-only) was an over-engineered API. Consumers don't think
"frame source backed by MKV" — they think "open MKV for reading".
The split paid a real API-complexity cost (two trait names, two
re-exports, dual impls per bidirectional type, deprecation bridge)
for one marginal property: compile-time direction-safety at the
trait-object boundary. The runtime error path on a wrong-direction
call (StreamReadOnly / StreamWriteOnly) is unambiguous and rare in
practice.
Deletions:
- pes::Stream is no longer #[deprecated]
- pes::FrameSource trait + its blanket-from-Stream bridge
- pes::FrameSink trait + the trampoline impls on every concrete type
- The compile-time-direction-safety test scaffolding
- Crate-root FrameSource / FrameSink re-exports
Additions:
- Stream is now Send-bounded (Stream: Send supertrait). Every
concrete impl was already Send-compliant — Box<dyn Read + Send>
and Box<dyn Write + Send> were already in place on the trait
objects MkvStream / M2tsStream / etc hold internally. Promoting
Send into the trait makes Box<dyn Stream> Send too, which lets
autorip drop its SendStream unsafe newtype.
The public API is now: one Stream trait, one concrete type per
format, two constructors (open/create or input/output). Bidirectional
types route through internal Mode { Read | Write } discriminants.
Net: -347 lines libfreemkv, -38 lines autorip, -5 lines freemkv.
v0.19.0 was tagged with a search-and-replace gone wrong:
rust-version, serde, and zip all had their version strings
replaced with "0.19.0". Edition 2024 rejected rust-version
0.19.0 (< 1.85), failing every CI build. No artifacts shipped
to crates.io.
Repair:
- rust-version: 0.19.0 → 1.86 (CI pin)
- serde: 0.19.0 → 1
- zip: 0.19.0 → 2
Also drops an unused start_lba binding in mux/disc.rs that
clippy 1.86 catches.
Foundation for label parsers that need structured access to .class
files inside /BDMV/JAR/<x>.jar. Replaces noak (~3KLOC dep) with a
~1000-line std-only reader.
Public API:
- ClassFile::parse(&[u8]) -> Result<ClassFile>
- ConstantPool::{get, utf8, class_name, string, integer, member_ref, iter}
- Member::code(&pool) -> Option<CodeAttribute>
- CodeAttribute::instructions() -> Instructions iterator
- Instruction::{name, operand_u8, operand_u16, cp_index}
- Opcode constants (LDC, AASTORE, NEW, GETSTATIC, INVOKESPECIAL, ...)
Spec coverage:
- Constant pool: all 17 tag types incl. Long/Double 2-slot quirk
- Modified UTF-8 incl. 0xC0 0x80 -> U+0000 special case
- Bytecode iteration with full opcode size table
- Variable-length tableswitch / lookupswitch / wide
12 unit tests cover the opcode table edge cases (padded switch tables,
wide-iinc 6-byte form), modified-UTF-8 decoder, and iterator
stop-on-truncated behaviour.
Module is currently #![allow(dead_code)] — the public API is staged
for labels::deluxe (Phases A-E bytecode walker) and a labels::dbp
refactor onto the constant-pool iterator. Tests exercise the API
in isolation. The allow comes off as those callers land.
Also fixes two pre-existing clippy lints that 1.86's stricter checks
flagged after I touched the labels module:
- src/mux/disc.rs: while-let-loop in test fixture
- tests/pass_n_size_aware_skip.rs: type_complexity in helper signature
Precommit (cargo +1.86 fmt + clippy + test) green.
Adds a Halt field to DiscStream, populated via the new
`with_halt(halt)` builder. The internal recovery / fill_extents
loops check `halt.is_cancelled()` directly. The existing
`set_halt(Arc<AtomicBool>)` method stays through the deprecation
window for callers (autorip mux) that haven't migrated; marked
#[deprecated] with a pointer to the constructor-time path.
Both signals are unified inside DiscStream: either Halt or the
legacy Arc<AtomicBool> triggers cancellation, so callers can mix
during the deprecation window without breaking stop behaviour.
See (internal)/memory/0_18_redesign.md and
0_18_round3_migration_audit.md.
Single contributor: MattJackson.
existing call sites — sweep producer and DiscStream demux
Round 1 shipped the DecryptingSectorSource decorator
(libfreemkv/src/sector/decrypting.rs) but the existing decrypt
sites kept calling crate::decrypt::decrypt_sectors inline. This
commit migrates both:
- Disc::sweep (disc/mod.rs): producer wraps the input reader
in DecryptingSectorSource::new(reader, keys) before the read loop.
The inline decrypt_sectors call goes away — read_sectors yields
plaintext directly.
- DiscStream (mux/disc.rs): constructor wraps the underlying
Box<dyn SectorReader> in DecryptingSectorSource so the internal
fill_extents / read path sees plaintext bytes. The DecryptKeys
field stays on DiscStream for metadata-side use; it just no
longer drives decryption.
Disc::patch carried the same inline decrypt step at three call
sites (main read, backtrack read, non-NOT_READY retry read). All
three migrated onto the same wrapping for a single audit surface.
Two small support changes carry the migration without touching
the round-1 decorator shape:
- sector/mod.rs gains specific SectorSource impls for
&mut dyn SectorReader and Box<dyn SectorReader>, mirroring
std's Read forwarding pattern. Generic blankets would conflict
with the existing SectorReader → SectorSource blanket under the
orphan rule (downstream could impl SectorReader for &mut U), so
the impls are scoped to the dyn-trait shape we actually consume.
- sector/decrypting.rs gains DecryptingSectorSource::set_keys so
DiscStream::set_raw() can flip the wrapped reader to a
DecryptKeys::None pass-through without rebuilding the decorator
(which would require moving the inner Box out from behind &mut self).
After this commit, grep `decrypt_sectors` in src/ shows the
function definition, its single use inside DecryptingSectorSource,
plus comments only. One audit surface for AACS / CSS / passthrough
correctness.
Behaviour-preserving: same plaintext bytes flow through; the only
difference is which type owns the decrypt step.
See (internal)/memory/0_18_redesign.md.
Single contributor: MattJackson.
Mirror of the FrameSink concrete migrations slice (f52e4c5) on the
read side. DiscStream is the only meaningful source impl in tree;
all the mux/* impls are sinks.
The round-1 blanket impl<T: Stream + Send> FrameSource for T
already covers DiscStream if it's Send. This slice:
- Audits DiscStream's interior types for Send (its Box<dyn
SectorReader> already requires Send via the trait's super-bound;
verify nothing else interior breaks Send).
- Adds a synthetic-input test that constructs Box<dyn FrameSource>
over a DiscStream, reads frames through the trait object, and
exercises info() / headers_ready() / codec_private().
- (Conditional) Adds a direct FrameSource impl on DiscStream only
if call-site ergonomics demand it; otherwise relies on the
blanket.
No caller migrated. mux::resolve::input still returns
Box<dyn Stream>; autorip / CLI consumers still call Stream::read.
Per-caller migration is a later slice.
See (internal)/memory/0_18_redesign.md.
Single contributor: MattJackson.
Splits the bidirectional pes::Stream into one-direction traits so
calling read() on a write-only sink is a compile error instead of
runtime E9001. Keeps Stream alive as deprecated through 0.18 with a
blanket FrameSource impl so existing concrete types compile unchanged.
FrameSink can't be blanket-impl'd from Stream (different finish
signature), so concrete impls migrate per-type in a follow-up.
Concrete `impl pes::Stream for X` blocks in mux/* and the existing
tests gain a one-line `#[allow(deprecated)]` to keep `-D warnings`
clean during the deprecation window — no behavior changes.
See (internal)/memory/0_18_redesign.md.
Single contributor: MattJackson.
Updates docs/ to reflect the recovery-loop strip:
- rip-recovery.md: drops Phase 1/2/3 description, replaces with three-layer
model (Disc::patch multi-pass / DiscStream batch halving / Drive::read
single-shot). Notes that no SCSI resets fire from any retry path.
- drive-access.md: removes SG_SCSI_RESET + STOP/START UNIT escalation
references; SgIoTransport::reset is now kernel SG_IO flush + ALLOW
MEDIUM REMOVAL only.
- src/mux/disc.rs + tests/: cargo fmt cleanup.
Drive::read is now single-shot. Phase 1/2/3 retries + scsi::reset+reopen
removed (~80 lines). recovery=true bumps timeout to 30s; recovery=false
stays at 1.5s. On any failure returns Err(DiscRead) immediately — caller
(Disc::patch outer loop, DiscStream batch halver) handles retries.
Inline reset+reopen WAS the wedge primitive on the LG BU40N. Per prior
post-mortem, every USB/SCSI reset path tested fails to recover the
wedged Initio bridge — the inline retry was pure cost.
SgIoTransport::reset (Linux) trimmed to kernel SG_IO state flush +
ALLOW MEDIUM REMOVAL. SG_SCSI_RESET ioctl + STOP/START UNIT escalation
removed. macOS reset removed (no-op). scsi::reset() top-level family
removed (no callers).
EventKind::BytesRead { bytes, total } now actually emitted from
DiscStream::fill_extents after each successful sector read. Was
declared in 0.13.0, never fired. Drives autorip per-device progress
in direct mode.
EventKind::Retry / SectorRecovered no longer emitted (variants kept
for forward compat). SpeedChange still emitted via Drive::set_speed
public path.
Tests: new tests/integration_progress_and_halt.rs (5 tests). 233 unit
tests + 5 integration green.
DiscStream::fill_extents loops internally while the demuxer waits for
enough clean data to emit a PES frame. In a dense bad zone that loop
can run for minutes without returning to the outer read() call, so
the caller's Stop signal never gets serviced until a frame is finally
emitted — which may be very far away.
Add DiscStream::set_halt(Arc<AtomicBool>) — typically wired to
Drive::halt_flag() for unified Stop across drive recovery phases and
stream sector processing. fill_extents checks the flag at the top of
every retry iteration; raising it returns Err(Error::Halted) within
one SCSI round-trip.
No behavior change for callers that don't call set_halt. Unblocks the
architectural fix for the "Stop doesn't stop" bug observed on a
damaged UHD disc.
Replace read_with_binary_search + 3×5s light recovery with an adaptive
sizer that shrinks on failure (halve, 3-aligned ≥6) and probes back up
after 100 MiB (51,200 sectors) of clean reads. Descent cost is paid
once per bad region, not once per bad sector.
Emit BatchSizeChanged { new_size, reason } on shrink and probe-up.
Remove BinarySearch event — no longer produced.
Side fix: scsi/macos.rs one-liner for manual_c_str_literals clippy
lint that surfaced on a newer toolchain.
Fix trailing sectors dropped at extent boundaries when sector_count % 3 != 0.
Add verify_title stop support via progress callback returning bool.
Add O_CLOEXEC on all SCSI fd opens to prevent leak to child processes.
Fix SCSI sense descriptor format detection (0x72/0x73 vs 0x70/0x71).
Use UDF file_extents() to read actual allocation descriptors instead
of assuming m2ts files are contiguous from file_start_lba. Dual-layer
UHD discs split large files across 70+ extents (~1 GB each) — the old
code created one extent from packet count which only covered the first
chunk, causing silent truncation at ~37%.
Also changed fill_extents() to return io::Result<bool> so read errors
propagate instead of being silently treated as EOF.
A stream is a stream. DiscStream::new() takes reader + title + keys +
batch + format — same pattern as every other stream constructor.
Deleted: open_drive(), open_iso(), from_reader() — these were helper
functions that chained multiple operations. Library provides primitives,
callers decide the sequence.
Removed disc:// case from input() — callers use Drive::open() +
Disc::scan() + DiscStream::new() directly for disc sources.
- DVD PS path now calls parser.parse() like BD-TS path does
- MPEG-2 sequence headers extracted for codec_private
- Keyframe detection from parser instead of always-true
- Fix CSS roundtrip tests: descramble uses TAB1 permutation, not pure XOR
- Disc::copy() hardcoded batch=64 sectors, exceeding BU40N's 60-sector
hw limit. Now accepts batch_sectors param, defaults to 60.
- IFO PGC: playback time at offset 0x04 not 0x02, cell time at cell+4
- DiscStream: set demuxer from content_format (TS for BD, PS for DVD)
- Flush TS/PS demuxers at EOF to avoid losing last PES frame
- M2tsStream: flush demuxer at EOF
- StdioStream: FMKV metadata header for roundtrip compatibility
Architecture:
- One stream per format, bidirectional PES (read/write on same type)
- IsoStream merged into DiscStream (one type, any SectorReader)
- Disc::copy() for disc→ISO raw sector dump
- IOStream trait deleted, all byte-level Read/Write removed
- ContentReader/OpenDisc/open_title/open_input/open_output deleted
- CountingStream wrapper for progress tracking
Error codes:
- All io::Error English strings replaced with Error enum variants
- From<Error> for io::Error conversion
- Unused variants removed, new stream/mux variants added
Deleted: mkvout.rs, pesout.rs, isowriter.rs, mkv-muxer-plan.md
Updated: all docs, README stream table, CHANGELOG
238 tests, 0 clippy warnings.
- Remove unused pes_buf field from M2tsStream and unused TS_PACKET/BD_TS_PACKET constants
- Replace match-with-single-pattern with if let (3 instances in drive/mod.rs)
- Replace match-can-be-? with ? operator for scsi::open call
- Add type aliases PesSetup and MkvHeaderResult to reduce type complexity
- Collapse identical if/else branches in tsmux.rs build_pes_header
- Use RangeInclusive::contains instead of manual range checks
- Make WriteSeek trait pub (was pub(crate) but leaked through pub fn)
- Remove empty line after doc comment in disc.rs
- Fix doc list item indentation in scsi/linux.rs (12 instances)
Matthew Jackson