Four targeted changes to maximize mux throughput regardless of storage
backend (local SSD, local HDD, NFS, network share) and surface enough
log data to diagnose 'mux slow' reports without a re-rip:
1. POSIX_FADV_SEQUENTIAL on FileSectorSource::open (Linux only).
Widens the kernel readahead window for sequential ISO reads. One
syscall at open, free on every storage type.
2. POSIX_FADV_DONTNEED on the ISO read side after every 32 MiB chunk.
Mirrors the writeback DONTNEED that already runs on the write
side. Keeps the read-side page cache bounded during multi-GB ISO
reads — eliminates the OOM-pressure / eviction-storm risk on
long mux runs. Linux only; per-drop trace at target="mux".
3. WritebackFile::create_with_size_hint(path, size_bytes) calls
fallocate(FALLOC_FL_KEEP_SIZE) on Linux to pre-reserve extents
for the output. Reported file size stays 0 (writes grow it
naturally) but the on-disk extent allocation is contiguous —
reduces extent fragmentation for big sequential muxes. Wired
into mkv:// and m2ts:// output paths via DiscTitle::size_bytes.
No-op on macOS/Windows; old create() kept with #[allow(dead_code)]
for callers without a size hint.
4. Adaptive WRITEBACK_CHUNK_BYTES in the Linux writeback pipeline.
Tracks sync_file_range(WAIT_AFTER) elapsed_ms in a rolling
16-sample window. p95 > 200 ms → double chunk size (cap 256 MiB).
p95 < 20 ms → halve (floor 4 MiB). One algorithm, both
fast-storage (small chunks, responsive) and slow-storage (big
chunks, fewer commit round-trips) optimized. Per-chunk trace +
per-32-chunk debug snapshot + info-on-resize so an operator can
see where the autoscaler settled.
All four are universal — no storage-type detection, no env vars to
flip, no per-deploy tuning required. Total +201/-6 across four files.
WO-5 (partial): the patch backtrack inner loop ('while bt_pos <
backtrack_end' in disc/patch.rs) issues per-sector reads to fill the
gap created by a damage-window skip. A long backtrack span can run
minutes; without an inline halt poll, the outer halt only takes
effect when control returns to the per-range loop. Adds a halt poll
at the top of each iteration so cancellation propagates inside the
backtrack span.
Per-sector read failures inside the backtrack already drop through
to the main fail path; this only changes the cancellation latency
between an /api/stop call and the producer actually unwinding. Drops
worst-case unwind from 'whole backtrack span × per-sector recovery
timeout' (minutes) to 'one in-flight SCSI command' (seconds).
The broader Arc<AtomicBool> → Halt migration on CopyOptions /
SweepOptions / PatchOptions / Drive::halt and Pipeline::send halt-
awareness is deferred — separate cycle, larger API impact.
WO-3c: Delete dead non-NOT_READY retry block (~100 LOC). The block
declared retry_count = 0 inside the per-iteration Err arm, so the
'MAX_NON_NOT_READY_RETRIES=3' budget actually fired exactly once
(1s pause + 1 retry) before falling through to NonTrimmed. The
'exponential backoff: 2s, 4s, 8s' comment was wrong by construction.
Cross-pass NonTrimmed retry (each pass gives the same sectors another
shot) already covers the recovery case, and gives the drive minutes
between attempts instead of 1-8 seconds — empirically what stochastic
recovery on the BU40N actually needs.
WO-4 (targeted slice): Add wedge-family cooldown on HARDWARE_ERROR /
ILLEGAL_REQUEST senses. These are what the BU40N's firmware fast-fail
state returns; every subsequent read in that state comes back in
<100ms. Pre-fix patch hammered the drive: mark NonTrimmed, sleep 1s,
advance, hit next wedge, mark, sleep 1s — exactly the rapid-retry
cadence the firmware is sensitive to. Now a wedge-family sense triggers
WEDGE_FAMILY_COOLDOWN_SECS=30 cooldown (matches read_error.rs's
ZONE_ENTRY_COOLDOWN_SECS), and WEDGE_ABORT_THRESHOLD=16 consecutive
wedges aborts the pass for autorip eject+reload. Any non-wedge read
clears the counter.
Also drops the duplicate NonTrimmed dispatch (Mapfile::record is
idempotent so it wasn't a correctness bug, but it doubled per-failure
consumer work).
WO-2 (delete SectorReader trait):
- The 0.18 trait split into SectorSource (read-only) and SectorSink
(write-only) is final; the legacy SectorReader alias was a bridge.
- Renames every internal &mut dyn SectorReader (~25 sites) to
&mut dyn SectorSource. The trait method capacity() becomes
capacity_sectors() with a default of 0 (preserves SectorReader's
default-0 behavior).
- Deletes the SectorReader trait, its blanket-to-Source bridge, and
the FileSectorReader type alias. Adds explicit forwarding impls
for Box<dyn SectorSource> and &mut dyn SectorSource so generic
decorators like DecryptingSectorSource<S: SectorSource> compose.
WO-3a (extract Disc::patch):
- Moves Disc::patch (1230 lines) and bytes_bad_in_title from
disc/mod.rs into disc/patch.rs as a split inherent impl. Zero
behavior change — pure mechanical relocation. disc/mod.rs drops
from 3,945 to 2,714 LOC.
WO-6 (partial):
- Deletes src/labels/png_filenames.rs — was a 72-LOC stub with
detect() returning false, never wired into the PARSERS registry.
CLAUDE.md doc drift fixes (audited 2026-05-13):
- JUMP_BASE_SECTORS: 256→1024 (64 MB base for UHD, not 8 MB)
- PASSN_DAMAGE_THRESHOLD_PCT: 12→6
- PASSN_SKIP_SECTORS_BASE: 64→32
- MAX_RANGE_SECS=180: replaced by proportional range_sectors × 25,
capped at RANGE_BUDGET_CAP_SECS=1800.
The 0.18 trait split into FrameSource (read-only) and FrameSink
(write-only) was an over-engineered API. Consumers don't think
"frame source backed by MKV" — they think "open MKV for reading".
The split paid a real API-complexity cost (two trait names, two
re-exports, dual impls per bidirectional type, deprecation bridge)
for one marginal property: compile-time direction-safety at the
trait-object boundary. The runtime error path on a wrong-direction
call (StreamReadOnly / StreamWriteOnly) is unambiguous and rare in
practice.
Deletions:
- pes::Stream is no longer #[deprecated]
- pes::FrameSource trait + its blanket-from-Stream bridge
- pes::FrameSink trait + the trampoline impls on every concrete type
- The compile-time-direction-safety test scaffolding
- Crate-root FrameSource / FrameSink re-exports
Additions:
- Stream is now Send-bounded (Stream: Send supertrait). Every
concrete impl was already Send-compliant — Box<dyn Read + Send>
and Box<dyn Write + Send> were already in place on the trait
objects MkvStream / M2tsStream / etc hold internally. Promoting
Send into the trait makes Box<dyn Stream> Send too, which lets
autorip drop its SendStream unsafe newtype.
The public API is now: one Stream trait, one concrete type per
format, two constructors (open/create or input/output). Bidirectional
types route through internal Mode { Read | Write } discriminants.
Net: -347 lines libfreemkv, -38 lines autorip, -5 lines freemkv.
v0.19.0 was tagged with a search-and-replace gone wrong:
rust-version, serde, and zip all had their version strings
replaced with "0.19.0". Edition 2024 rejected rust-version
0.19.0 (< 1.85), failing every CI build. No artifacts shipped
to crates.io.
Repair:
- rust-version: 0.19.0 → 1.86 (CI pin)
- serde: 0.19.0 → 1
- zip: 0.19.0 → 2
Also drops an unused start_lba binding in mux/disc.rs that
clippy 1.86 catches.
Pass 1 sweep was grinding through damage zones because the marginal-
media handler returned `Bisect` for every failed 32-sector batch —
forcing 32 single-sector reads per bad block at ~5s each on a real
BU40N-vs-Dune-Pt-2 trace. AND the JumpAhead trigger required a 16-
block damage window to fill before firing, so entry into a
contiguous damage zone took ~40 minutes of grinding before the
first jump fired. Architecturally wrong: Pass 1's job is "fast and
accurate, get the most data in the shortest time." Bisection +
recovery is Pass N's purpose-built role.
ReadCtx now carries two new fields:
- `consecutive_outer_failures: u64` — outer-batch failures since
last outer success. Bisect inner failures don't count.
- `bisect_on_marginal: bool` — whether to return Bisect on a
marginal-media batch failure.
- `fast_jump_threshold: u64` — outer-failures count that triggers
JumpAhead before the damage window has filled.
`for_sweep` (Pass 1) sets `bisect_on_marginal=false`,
`fast_jump_threshold=4`, and zeroes the post-failure pause. Failed
batches become SkipBlock → whole block NonTrimmed → advance, no
sleep. After 4 consecutive outer failures: JumpAhead with the
existing escalating multiplier.
`for_patch` (Pass N) sets `bisect_on_marginal=true`,
`fast_jump_threshold=u64::MAX`, keeps the original cooldown pauses.
Pass N's whole reason to exist is to grind on bad ranges with
proper recovery semantics — single-sector reads, 60s recovery
timeout, retry budget, escalating skip — and that's unchanged.
`on_success` resets `consecutive_outer_failures` only when not
bisecting, so a good single-sector read inside Pass N's bisect
doesn't pretend we've escaped the damaged batch.
Tests:
- `pass_n_marginal_with_batch_gt_1_bisects` — Pass N still bisects.
- `pass_1_marginal_skips_instead_of_bisecting` — Pass 1 doesn't.
- `pass_1_jumps_after_4_consecutive_outer_failures` — fast-entry.
- `pass_n_does_not_fast_jump` — fast-entry is Pass-1-only.
- `outer_success_resets_consecutive_outer_failures` — counter reset.
- `bisect_inner_success_does_not_reset_outer_counter` — semantics.
- `pass_1_does_not_pause_on_skip` — explicit zero-pause contract.
- `long_failure_streak_extends_pause_on_pass_n` — Pass N still
extends pauses on long failure streaks (renamed from the old
sweep-based test).
Integration test `test_disc_copy_marks_failed_ecc_blocks_as_nontrimmed`
updated: it used to assert Pass 1 recovers all sectors via bisect
(bytes_good=total). New contract: Pass 1 marks NonTrimmed; Pass N
recovers. Test now asserts Pass-1-only outcome (bytes_pending=total,
complete=false) consistent with the redesign.
Real-world impact on the user's BU40N + Dune Pt 2 trace from this
session: a damage zone that was on track to take ~40 minutes of
Pass-1 grinding will now jump in ~20 seconds. Pass N still has the
full 7-pass recovery budget to revisit those NonTrimmed ranges.
decrypt::decrypt_sectors now restores chunks when decrypt_unit_full's
TS-sync verification fails, preventing 0.18.1's silent corruption of
MPLS/CLPI navigation files when DecryptingSectorSource decorates the
sweep reader. Fixes E6009 NoStreams on info iso:// for AACS-encrypted
UHDs ripped without --raw.
Disc::sweep progress takes max(snapshot.bytes_good, bytes_done) so
the user-visible counter never regresses below what the producer has
already sent.
The bounded-cache writeback wrapper (crate::io::Writer) was added in
0.17.10 and wired into Disc::sweep in 0.17.11, but the other two
paths in the crate that write large amounts of data sequentially —
Disc::patch and the MKV/M2TS mux — were still operating on raw
std::fs::File. That meant the dirty-page burst pathology the wrapper
exists to prevent could still bite on slow / network-attached staging
during recovery and mux phases.
This release plugs those gaps:
- Disc::patch (disc/mod.rs:1981) now wraps the reopened ISO in
Writer before any seek / write. sync_all on Writer cleanly drains
the in-flight chunk before the existing fsync.
- mux/resolve.rs MKV and M2TS branches wrap the output File in
Writer underneath BufWriter. UHD MKV mux routinely produces 70+ GB
of sequential output; the page cache no longer absorbs that as a
single hot blast on slow targets.
Mapfile, log, settings, history, and stream-pipeline byte buffers
remain unchanged: those are either small one-shot writes (where
the wrapper has zero benefit and adds a stream_position syscall) or
already use bounded persistence (mapfile time-batched in 0.17.12).
The principle: any path that writes substantial sequential data to
a single file uses Writer; trivial writes don't.
Pre-0.17.12 every Mapfile::record() persisted the full mapfile via
tempfile-create + write + atomic-rename. On local LVM that's
microseconds; on NFS each rename is multiple RPCs through the
unraid user-share fuse layer, dragging a Black Mass UHD rip from
~11 MB/s on local to ~1.5 MB/s on NFS — the mapfile path alone burned
multiple seconds of wall time per real-world second of work.
Mapfile now batches the rename to once per second:
- record() always updates in-memory state and stats; only fires
write_to_disk when last_flushed.elapsed() >= FLUSH_INTERVAL (1 s).
- New flush() API forces a persist; called by sweep_pipeline's
consumer at end-of-sweep and by Disc::patch at end-of-patch,
after the file's sync_all.
- Drop impl best-effort flushes so an early-return / unwind doesn't
silently lose pending state.
Crash-safety changes from "lose at most one block" to "lose at most
1 s of recorded progress" — the ISO file's payload bytes are unaffected;
only the mapfile's authority over which sectors are already-good is at
risk, and a resume re-reads anything Pass 1 had already covered.
Measured on the BU40N test bed against Black Mass UHD inner zone:
- NFS staging: 1.5 MB/s → 16.48 MB/s (10.9× recovery)
- Local LVM staging: 11.09 MB/s → 11.83 MB/s (+6.7 % bonus)
Internal round_trip_load test now flushes before reading back from
disk. External patch / copy tests are unaffected: patch and
sweep_pipeline flush at completion before returning.
Pre-0.17.11 sweep ran strictly serialised: SCSI read → decrypt → seek
+ write → mapfile.record → next read. Drive idled for the post-read
work; throughput capped at the sum of both costs. On a healthy disc
that's ~7-12 ms read + ~5-15 ms write/record per 64 KB batch, limiting
sustained throughput to ~10-12 MB/s on the test bed (BU40N + UHD inner
zone), well below the ~14-16 MB/s drive ceiling.
Decouples them: producer thread (caller's) owns SectorReader +
read_error state + decrypt + set_speed + halt; consumer thread (one
spawn) owns Writer + Mapfile, receives WorkItem messages, applies
file write + mapfile record. Bounded mpsc::sync_channel(4) gives
natural back-pressure. While the consumer writes batch N, the
producer is already reading batch N+1 — steady-state throughput is
now bound by the slower of the two pipelines (drive on healthy
discs), not their sum.
Side effects:
- Bisect path now decrypts. Pre-0.17.11 the bisect inner loop wrote
raw cyphertext for single-sector recoveries on encrypted discs —
quiet correctness bug exercised only by batch-fail-then-
bisect-succeed on encrypted media. New producer-side decrypt
covers main + bisect success paths uniformly.
- All read_ctx state stays single-threaded on producer (damage
window, jump multiplier, etc.). No locking added.
- Mapfile remains single-writer on consumer. No locking.
- Halt latency: producer breaks loop, sends Finish, consumer drains
≤4 in-flight items + sync_all. ~1 batch (~12 ms) typical.
- BU40N + Initio bridge wedge concern unchanged: still single SCSI
command in flight, error-path timing identical, no new retries.
New module: src/disc/sweep_pipeline.rs (WorkItem, ProgressSnapshot,
ConsumerInputs, spawn_consumer, consumer_loop, helpers). Public API
unchanged — Disc::copy / CopyOptions / CopyResult identical.
Patch (Pass N) is NOT changed; it's bound by drive recovery time, not
the read/write serialisation.
Pass 1 sweep speed on a healthy disc previously dipped from ~15 MB/s
to ~1 MB/s every ~30 s on a host with default Linux dirty-page
settings. Empirical cause: the kernel's vm.dirty_ratio (~20% of RAM)
lets hundreds of MB of dirty pages accumulate, then bursts a flush at
99% disk utilisation that blocks app writes for ~1 s. Confirmed on
the BU40N test bed — dirty pages grew 112 → 563 MB between bursts;
lowering vm.dirty_bytes to 64 MB at the host sysctl level eliminated
the dips. Shipping the equivalent inside libfreemkv so users do not
need to tune the host kernel.
- New crate::io::Writer: drop-in File wrapper (impl Write + Seek).
Wraps a per-platform WritebackPipeline that on Linux schedules
sync_file_range(WRITE) + lagging sync_file_range(WAIT_AFTER) +
posix_fadvise(DONTNEED) in 32 MB chunks, bounding dirty cache at
~64 MB. macOS and Windows ship a no-op stub.
- Disc::sweep wraps its output File in Writer. Loop body unchanged.
- Module is purpose-built so any large sequential output (patch,
mux) can adopt the same wrapper as a one-line change later.
Version bump to keep the four freemkv crates at unified versioning
after autorip's v0.17.6 + v0.17.7 work today. No libfreemkv code
changes; republished to crates.io so downstream consumers stay
aligned on the latest patch version.
Direct-SATA BU40N + Dune Part Two UHD live testing exposed that the
v0.17.3 single-shot SCSI READ path matched 0/22 of the small bad-
sector LBAs that dd if=/dev/sr0 recovers on the same drive. This
release closes that gap and fixes adjacent bugs silently capping
recovery.
- /dev/sr0 pread fallback in Drive::read (Linux only): on SCSI READ
Err, fall back to posix_fadvise(DONTNEED) + pread() against the
corresponding block device. Kernel sr_mod runs ~5 internal retries
with no per-attempt mid-layer escalation overhead — the mechanism
behind dd's recovery advantage. End-to-end byte verification
confirms the fallback path returns real disc data.
- Disc::patch per-range watchdog fix: MAX_RANGE_SECS was breaking
'outer (one slow range killed the entire patch). Now skips to the
next range. Pre-fix patch died after 4 sectors of range 1 of 47.
- Per-sector range budget: range_budget = sectors × 25 s, capped at
1800 s. Replaces the flat 180 s/range that was unfair to medium
ranges and pointlessly generous to single-sector ones.
- consecutive_failures resets per range. The wedge-exit detector is
for stuck-on-one-range, not many-small-ranges-with-one-fail-each.
- Reverted inline 5× retry experiment (was hurting: each retry paid
kernel SCSI escalation overhead). Restored READ_RECOVERY_TIMEOUT_MS
to 60 s. The kernel-auto-retry pattern is now provided by sr0
fallback.
Empirical: pass 1 recovered 94.6 MB / 11 s of main title (33 sr0
saves). Pass 2 added 0.6 MB. Remaining ~233 MB on the test disc
appears physically unrecoverable on this hardware.
tests/scsi_recovery.rs:
- Add `use std::time::Duration` inside both `#[cfg(target_os = "linux")]`
blocks. Locally on macOS the linux blocks are cfg-out so the missing
import was invisible to precommit on macOS.
- Bug pre-dated this branch but only surfaced when v0.17.2 release CI
ran the test compile on Linux.
Cargo.toml: 0.17.2 -> 0.17.3.
Cargo.toml: 0.17.1 -> 0.17.2. Functionally identical to the prior
commit; 0.17.1 was never published to crates.io but a tag exists on
the remote pointing at an unrelated commit. Bumping past it.
src/disc/mod.rs:
- Cache priming (3-sector lookback) before patch's single-sector reads.
Drive read-ahead pulls in adjacent pages so the target may already be
cached when we ask for it. Throwaway reads — failures here don't
update mapfile state.
- When patch hits skip-limit on a range, leave remaining sectors
NonTrimmed instead of marking Unreadable. We never tried to read those
sectors, so don't give them terminal status — drive state evolves
between passes (cache, mechanical settle), and a later pass may
succeed.
tests/pass_n_patch_fix.rs:
- New regression test for the decrypt key inversion bug at
src/disc/mod.rs:1938-1942. Asserts decrypt_sectors is invoked with
the correct key when opts.decrypt=true.
tests/pass_n_size_aware_skip.rs:
- rustfmt-only changes.
Cargo.toml: 0.17.0 -> 0.17.1.
- Fix unwrap in disc/mod.rs sweep() hot path using pattern matching
- Patch pass excludes Unreadable sectors from work list
- Expose bytes_bad_in_title for accurate UI reporting
- All 256 tests pass, cargo clippy clean with -D warnings
matthew