//! Windows SCSI transport via SPTI (SCSI Pass-Through Interface).
//!
//! Sends SCSI commands through DeviceIoControl with IOCTL_SCSI_PASS_THROUGH_DIRECT.
//! Accepts device paths like `D:`, `E:`, `\\.\CdRom0`, or `\\.\D:`.
//!
//! Requires administrator privileges for raw SCSI access.

use super::{DataDirection, ScsiResult, ScsiTransport};
use crate::error::{Error, Result};
use std::path::Path;

// ── Windows constants ──────────────────────────────────────────────────────

const IOCTL_SCSI_PASS_THROUGH_DIRECT: u32 = 0x4D014;
/// IOCTL_STORAGE_QUERY_PROPERTY — CTL_CODE(IOCTL_STORAGE_BASE(0x2D),
/// 0x500, METHOD_BUFFERED(0), FILE_ANY_ACCESS(0)) = 0x002D1400.
const IOCTL_STORAGE_QUERY_PROPERTY: u32 = 0x002D1400;
// IOCTL_STORAGE_RESET_DEVICE (ntddstor.h) = 0x002D5004. Two earlier values
// silently no-op'd the reset (ERROR_INVALID_FUNCTION) instead of failing
// loud. See docs/scsi-windows.md — IOCTL_STORAGE_RESET_DEVICE derivation.
const IOCTL_STORAGE_RESET_DEVICE: u32 = 0x002D_5004;
/// STORAGE_PROPERTY_ID::StorageAdapterProperty.
const STORAGE_ADAPTER_PROPERTY: u32 = 1;
/// STORAGE_QUERY_TYPE::PropertyStandardQuery.
const PROPERTY_STANDARD_QUERY: u32 = 0;

/// Conservative fallback when the adapter MaximumTransferLength query
/// fails — 64 KiB is universally safe for SPTD on any Windows storage
/// stack. Also the floor we clamp a reported value up to.
const WINDOWS_MIN_TRANSFER_BYTES: usize = 64 * 1024;

const SCSI_IOCTL_DATA_OUT: u8 = 0;
const SCSI_IOCTL_DATA_IN: u8 = 1;
const SCSI_IOCTL_DATA_UNSPECIFIED: u8 = 2;

const GENERIC_READ: u32 = 0x80000000;
const GENERIC_WRITE: u32 = 0x40000000;
const FILE_SHARE_READ: u32 = 0x00000001;
const FILE_SHARE_WRITE: u32 = 0x00000002;
const OPEN_EXISTING: u32 = 3;
const FILE_ATTRIBUTE_NORMAL: u32 = 0x80;
const INVALID_HANDLE_VALUE: isize = -1;

const K_MAX_CDB_SIZE: usize = 16;
const K_SENSE_SIZE: usize = 32;

// ── SCSI_PASS_THROUGH_DIRECT structure ─────────────────────────────────────

#[repr(C)]
#[allow(non_snake_case)]
struct ScsiPassThroughDirect {
    Length: u16,
    ScsiStatus: u8,
    PathId: u8,
    TargetId: u8,
    Lun: u8,
    CdbLength: u8,
    SenseInfoLength: u8,
    DataIn: u8,
    _padding1: [u8; 3],
    DataTransferLength: u32,
    TimeOutValue: u32,
    DataBuffer: *mut u8,
    SenseInfoOffset: u32,
    Cdb: [u8; K_MAX_CDB_SIZE],
}

#[repr(C)]
struct SptwbDirect {
    spt: ScsiPassThroughDirect,
    sense: [u8; K_SENSE_SIZE],
}

// ── STORAGE_QUERY_PROPERTY structures (winioctl.h) ─────────────────────────

/// Input to IOCTL_STORAGE_QUERY_PROPERTY. Mirrors `STORAGE_PROPERTY_QUERY`:
/// `{ PropertyId: u32, QueryType: u32, AdditionalParameters: [u8; 1] }`.
#[repr(C)]
#[allow(non_snake_case)]
struct StoragePropertyQuery {
    PropertyId: u32,
    QueryType: u32,
    AdditionalParameters: [u8; 1],
}

// Prefix of `STORAGE_ADAPTER_DESCRIPTOR` (winioctl.h) up to
// `MaximumTransferLength`; the driver fills the whole thing, we only read
// this prefix. See docs/scsi-windows.md — StorageAdapterDescriptor field layout.
#[repr(C)]
#[allow(non_snake_case)]
struct StorageAdapterDescriptor {
    Version: u32,
    Size: u32,
    MaximumTransferLength: u32,
    MaximumPhysicalPages: u32,
    AlignmentMask: u32,
    AdapterUsesPio: u8,
    AdapterScansDown: u8,
    CommandQueueing: u8,
    AcceleratedTransfer: u8,
    // STORAGE_BUS_TYPE is an `int`-sized enum (4 bytes), not a byte: with
    // the preceding BOOLEANs filling 20..24, `BusType` sits at offset 24
    // and the USHORT version fields follow at 28/30, matching winioctl.h.
    BusType: u32,
    BusMajorVersion: u16,
    BusMinorVersion: u16,
}

// ── Windows FFI ────────────────────────────────────────────────────────────

unsafe extern "system" {
    fn CreateFileW(
        lpFileName: *const u16,
        dwDesiredAccess: u32,
        dwShareMode: u32,
        lpSecurityAttributes: *const std::ffi::c_void,
        dwCreationDisposition: u32,
        dwFlagsAndAttributes: u32,
        hTemplateFile: *const std::ffi::c_void,
    ) -> isize;

    fn CloseHandle(hObject: isize) -> i32;

    fn GetLastError() -> u32;

    fn DeviceIoControl(
        hDevice: isize,
        dwIoControlCode: u32,
        lpInBuffer: *mut std::ffi::c_void,
        nInBufferSize: u32,
        lpOutBuffer: *mut std::ffi::c_void,
        nOutBufferSize: u32,
        lpBytesReturned: *mut u32,
        lpOverlapped: *mut std::ffi::c_void,
    ) -> i32;
}

// ── Transport implementation ───────────────────────────────────────────────

pub struct SptiTransport {
    handle: isize,
    /// Adapter MaximumTransferLength in bytes, queried once at open via
    /// IOCTL_STORAGE_QUERY_PROPERTY and clamped to at least
    /// [`WINDOWS_MIN_TRANSFER_BYTES`]. A single READ larger than this fails
    /// `DeviceIoControl` outright, so [`crate::Drive::read`] chunks to it.
    max_transfer: usize,
    /// Adapter `AlignmentMask` (STORAGE_ADAPTER_DESCRIPTOR, ntddscsi.h /
    /// winioctl.h), queried alongside `max_transfer`. `0` (common on USB
    /// bridges) means no alignment requirement; a nonzero mask (SCSI/SAS
    /// HBAs) means a misaligned `DataBuffer` makes `DeviceIoControl` fail.
    /// When set and the caller's buffer is misaligned, `execute()` bounces
    /// through an aligned scratch buffer (see there).
    /// See docs/scsi-windows.md — alignment_mask / bounce-buffer rationale.
    alignment_mask: u32,
}

// SptiTransport's only field is an isize HANDLE: Send+Sync auto-derive;
// `&mut self` on execute() enforces exclusive use, not absence of Sync.

// Normalize a device path to \\.\X: format; see docs/scsi-windows.md — normalize_device_path duplication.
fn normalize_device_path(path: &str) -> String {
    if path.starts_with("\\\\.\\") {
        return path.to_string();
    }
    let trimmed = path.trim_end_matches('\\');
    if trimmed.len() == 2 && trimmed.as_bytes()[1] == b':' {
        return format!("\\\\.\\{}", trimmed);
    }
    if path.to_lowercase().starts_with("cdrom") {
        return format!("\\\\.\\{}", path);
    }
    format!("\\\\.\\{}", path)
}

impl SptiTransport {
    pub fn open(device: &Path) -> Result<Self> {
        let dev_str = device.to_str().ok_or_else(|| Error::DeviceNotFound {
            path: device.display().to_string(),
        })?;

        // Normalize device path to \\.\X: format
        let win_path = normalize_device_path(dev_str);
        let wide: Vec<u16> = win_path.encode_utf16().chain(std::iter::once(0)).collect();

        let handle = unsafe {
            CreateFileW(
                wide.as_ptr(),
                GENERIC_READ | GENERIC_WRITE,
                FILE_SHARE_READ | FILE_SHARE_WRITE,
                std::ptr::null(),
                OPEN_EXISTING,
                FILE_ATTRIBUTE_NORMAL,
                std::ptr::null(),
            )
        };

        if handle == INVALID_HANDLE_VALUE {
            // Map last-os-error → Error variant; don't embed English hints
            // in the path field (the CLI handles localization).
            let err = std::io::Error::last_os_error();
            return Err(if err.kind() == std::io::ErrorKind::PermissionDenied {
                Error::DevicePermission {
                    path: dev_str.to_string(),
                }
            } else {
                Error::DeviceNotFound {
                    path: dev_str.to_string(),
                }
            });
        }

        let (max_transfer, alignment_mask) = query_adapter_descriptor(handle);

        Ok(SptiTransport {
            handle,
            max_transfer,
            alignment_mask,
        })
    }

    /// Reset the drive to a known good state.
    /// Opens the device, sends IOCTL_STORAGE_RESET_DEVICE to reset
    /// the USB/SCSI bus, then closes. Same concept as SG_SCSI_RESET on Linux.
    pub fn reset(device: &Path) -> Result<()> {
        let dev_str = device.to_str().ok_or_else(|| Error::DeviceNotFound {
            path: device.display().to_string(),
        })?;
        let win_path = normalize_device_path(dev_str);
        let wide: Vec<u16> = win_path.encode_utf16().chain(std::iter::once(0)).collect();

        // Open
        let handle = unsafe {
            CreateFileW(
                wide.as_ptr(),
                GENERIC_READ | GENERIC_WRITE,
                FILE_SHARE_READ | FILE_SHARE_WRITE,
                std::ptr::null(),
                OPEN_EXISTING,
                FILE_ATTRIBUTE_NORMAL,
                std::ptr::null(),
            )
        };
        if handle == INVALID_HANDLE_VALUE {
            return Ok(()); // can't open — skip reset, not fatal
        }

        // Send device reset. Result must be checked: a wrong/unsupported
        // IOCTL fails with ERROR_INVALID_FUNCTION and no-ops silently —
        // surface failures so a non-functional reset isn't masked below.
        let mut returned: u32 = 0;
        let ok = unsafe {
            DeviceIoControl(
                handle,
                IOCTL_STORAGE_RESET_DEVICE,
                std::ptr::null_mut(),
                0,
                std::ptr::null_mut(),
                0,
                &mut returned,
                std::ptr::null_mut(),
            )
        };
        let reset_ok = ok != 0;
        if reset_ok {
            tracing::debug!("IOCTL_STORAGE_RESET_DEVICE succeeded");
        } else {
            let err = unsafe { GetLastError() };
            // Not fatal — reset is best-effort — but a failing reset means
            // the device was NOT reset, so skip the settle-sleep below.
            tracing::warn!(
                last_error = err,
                ioctl = format_args!("{IOCTL_STORAGE_RESET_DEVICE:#010x}"),
                "IOCTL_STORAGE_RESET_DEVICE failed; drive not reset"
            );
        }

        // Close the handle, then — only if the reset actually happened — wait
        // for the drive to settle. A failed IOCTL reset performed no reset, so
        // sleeping would burn 2 s for nothing.
        unsafe { CloseHandle(handle) };
        if reset_ok {
            std::thread::sleep(std::time::Duration::from_secs(2));
        }
        Ok(())
    }
}

/// Enumerate optical drives on Windows: probe `\\.\CdRom0..15`, falling back to
/// drive letters `D..Z` only if none match, INQUIRY each, and keep the optical
/// ones (peripheral device type 0x05).
///
/// Self-contained at the SCSI layer via `scsi::open` + `scsi::inquiry` (as the
/// Linux backend is), with no dependency on the `rip`-gated `drive`/`identity`
/// modules — `scsi` builds without `rip` (freemkv-firmware), where the old
/// `crate::drive::windows::find_drives()` delegation failed to compile.
pub(super) fn list_drives() -> Vec<super::DriveInfo> {
    // SCSI peripheral device type 5 = MMC / optical, low 5 bits of INQUIRY byte 0.
    const SCSI_PERIPHERAL_TYPE_OPTICAL: u8 = 0x05;

    fn probe(path: &str, out: &mut Vec<super::DriveInfo>) {
        let Ok(mut transport) = crate::scsi::open(Path::new(path)) else {
            return;
        };
        let Ok(r) = super::inquiry(transport.as_mut()) else {
            return;
        };
        if !r.raw.is_empty() && (r.raw[0] & 0x1F) == SCSI_PERIPHERAL_TYPE_OPTICAL {
            out.push(super::DriveInfo {
                path: normalize_device_path(path),
                vendor: r.vendor_id,
                model: r.model,
                firmware: r.firmware,
            });
        }
    }

    let mut drives = Vec::new();
    for i in 0..16 {
        probe(&format!("\\\\.\\CdRom{}", i), &mut drives);
    }
    // Only fall back to drive letters if the CdRom scan found nothing.
    if drives.is_empty() {
        for letter in b'D'..=b'Z' {
            probe(&format!("{}:", letter as char), &mut drives);
        }
    }
    drives
}

/// TEST UNIT READY probe on Windows. No in-library recovery — see the
/// Linux `drive_has_disc` doc block for the rationale.
pub(super) fn drive_has_disc(path: &Path) -> Result<bool> {
    let mut transport = SptiTransport::open(path)?;
    let cdb = [crate::scsi::SCSI_TEST_UNIT_READY, 0, 0, 0, 0, 0];
    let mut buf = [0u8; 0];
    match transport.execute(
        &cdb,
        crate::scsi::DataDirection::None,
        &mut buf,
        crate::scsi::TUR_TIMEOUT_MS,
    ) {
        Ok(_) => Ok(true),
        Err(ref e) if e.scsi_sense().is_some_and(|s| s.is_not_ready()) => Ok(false),
        Err(e) => Err(e),
    }
}

impl Drop for SptiTransport {
    fn drop(&mut self) {
        if self.handle != INVALID_HANDLE_VALUE {
            unsafe {
                CloseHandle(self.handle);
            }
        }
    }
}

// Query the adapter descriptor via IOCTL_STORAGE_QUERY_PROPERTY; returns
// (max_transfer_bytes, alignment_mask), both safely defaulted on failure.
// See docs/scsi-windows.md — query_adapter_descriptor contract.
fn query_adapter_descriptor(handle: isize) -> (usize, u32) {
    if handle == INVALID_HANDLE_VALUE {
        return (WINDOWS_MIN_TRANSFER_BYTES, 0);
    }
    let query = StoragePropertyQuery {
        PropertyId: STORAGE_ADAPTER_PROPERTY,
        QueryType: PROPERTY_STANDARD_QUERY,
        AdditionalParameters: [0u8; 1],
    };
    let mut desc: StorageAdapterDescriptor = unsafe { std::mem::zeroed() };
    let mut bytes_returned: u32 = 0;
    let ok = unsafe {
        DeviceIoControl(
            handle,
            IOCTL_STORAGE_QUERY_PROPERTY,
            &query as *const _ as *mut std::ffi::c_void,
            std::mem::size_of::<StoragePropertyQuery>() as u32,
            &mut desc as *mut _ as *mut std::ffi::c_void,
            std::mem::size_of::<StorageAdapterDescriptor>() as u32,
            &mut bytes_returned,
            std::ptr::null_mut(),
        )
    };
    // MaximumTransferLength sits at offset 8; need at least that many bytes
    // written for the field to be valid.
    let max_valid = ok != 0
        && bytes_returned as usize
            >= std::mem::offset_of!(StorageAdapterDescriptor, MaximumTransferLength)
                + std::mem::size_of::<u32>();
    let max_transfer = if !max_valid || desc.MaximumTransferLength == 0 {
        WINDOWS_MIN_TRANSFER_BYTES
    } else {
        (desc.MaximumTransferLength as usize).max(WINDOWS_MIN_TRANSFER_BYTES)
    };

    // AlignmentMask sits at offset 16; only trust it if the reply is long
    // enough. Otherwise assume 0 (no alignment requirement).
    let align_valid = ok != 0
        && bytes_returned as usize
            >= std::mem::offset_of!(StorageAdapterDescriptor, AlignmentMask)
                + std::mem::size_of::<u32>();
    let alignment_mask = if align_valid { desc.AlignmentMask } else { 0 };

    (max_transfer, alignment_mask)
}

impl ScsiTransport for SptiTransport {
    fn max_transfer_bytes(&self) -> usize {
        self.max_transfer
    }

    fn execute(
        &mut self,
        cdb: &[u8],
        direction: DataDirection,
        data: &mut [u8],
        timeout_ms: u32,
    ) -> Result<ScsiResult> {
        // Zero the data buffer for reads to prevent returning uninitialized data
        // if the driver doesn't fully update DataTransferLength.
        if direction == DataDirection::FromDevice {
            data.fill(0);
        }

        let mut sptwb: SptwbDirect = unsafe { std::mem::zeroed() };

        // Reject an over-length CDB rather than truncating it: SPC-4 fixes
        // a command's length by opcode group code, so a truncated CDB is a
        // DIFFERENT command the drive would execute and answer as GOOD.
        let cdb_len = usize::from(super::checked_cdb_len(cdb, K_MAX_CDB_SIZE)?);
        sptwb.spt.Length = std::mem::size_of::<ScsiPassThroughDirect>() as u16;
        sptwb.spt.CdbLength = cdb_len as u8;
        sptwb.spt.SenseInfoLength = K_SENSE_SIZE as u8;
        sptwb.spt.DataIn = match direction {
            DataDirection::None => SCSI_IOCTL_DATA_UNSPECIFIED,
            DataDirection::FromDevice => SCSI_IOCTL_DATA_IN,
            DataDirection::ToDevice => SCSI_IOCTL_DATA_OUT,
        };
        // Match the macOS/Linux guard: a >=4 GiB buffer would wrap when cast to
        // u32 below, producing a short transfer reported as success with the
        // wrong byte count.
        if data.len() > u32::MAX as usize {
            return Err(Error::ScsiError {
                opcode: cdb.first().copied().unwrap_or(0),
                status: super::SCSI_STATUS_TRANSPORT_FAILURE,
                sense: None,
            });
        }
        sptwb.spt.DataTransferLength = data.len() as u32;
        // Round up to the next whole second (SPTI's TimeOutValue has no
        // sub-second resolution) rather than truncating — truncation
        // broke 1500ms fast-reads on Drive::read.
        sptwb.spt.TimeOutValue = ((timeout_ms + 999) / 1000).max(1);

        // AlignmentMask bounce buffer: `DataBuffer` must satisfy the
        // adapter's `AlignmentMask` (0 on USB — zero-copy; nonzero on
        // SCSI/SAS HBAs, where misalignment fails the IOCTL outright).
        let mask = self.alignment_mask as usize;
        let needs_bounce =
            !data.is_empty() && mask != 0 && (data.as_mut_ptr() as usize) & mask != 0;
        let mut bounce: Vec<u8> = Vec::new();
        let data_ptr: *mut u8 = if data.is_empty() {
            std::ptr::null_mut()
        } else if needs_bounce {
            // Over-allocate by `mask` so an aligned start exists within.
            bounce = vec![0u8; data.len() + mask];
            let base = bounce.as_mut_ptr() as usize;
            let aligned = crate::scsi::align_up(base, mask);
            let aligned_ptr = aligned as *mut u8;
            // For writes (ToDevice) prime the aligned region with the
            // caller's payload before the IOCTL. (FromDevice copies back
            // after.)
            if direction == DataDirection::ToDevice {
                unsafe {
                    std::ptr::copy_nonoverlapping(data.as_ptr(), aligned_ptr, data.len());
                }
            }
            aligned_ptr
        } else {
            data.as_mut_ptr()
        };
        sptwb.spt.DataBuffer = data_ptr;
        sptwb.spt.SenseInfoOffset = std::mem::offset_of!(SptwbDirect, sense) as u32;
        sptwb.spt.Cdb[..cdb_len].copy_from_slice(&cdb[..cdb_len]);

        let buf_size = std::mem::size_of::<SptwbDirect>() as u32;
        let mut bytes_returned: u32 = 0;

        let ok = unsafe {
            DeviceIoControl(
                self.handle,
                IOCTL_SCSI_PASS_THROUGH_DIRECT,
                &mut sptwb as *mut _ as *mut std::ffi::c_void,
                buf_size,
                &mut sptwb as *mut _ as *mut std::ffi::c_void,
                buf_size,
                &mut bytes_returned,
                std::ptr::null_mut(),
            )
        };

        if ok == 0 {
            // Capture the Win32 error before returning — this hot path used
            // to omit it, collapsing struct-layout bugs, access-denied, and
            // a genuinely wedged drive into the same status-0xFF with no log.
            let last_error = unsafe { GetLastError() };
            tracing::warn!(
                target: "freemkv::scsi",
                opcode = cdb.first().copied().unwrap_or(0),
                last_error,
                "DeviceIoControl(IOCTL_SCSI_PASS_THROUGH_DIRECT) failed"
            );
            // Driver-level failure. Bubble up; in-library handle recovery
            // was removed in 0.13.20 — the kernel mid-layer already escalated
            // by the time DeviceIoControl returned. Caller surfaces to UX.
            return Err(Error::ScsiError {
                opcode: cdb.first().copied().unwrap_or(0),
                status: super::SCSI_STATUS_TRANSPORT_FAILURE,
                sense: None,
            });
        }

        if sptwb.spt.ScsiStatus != 0 {
            // SPTI doesn't surface a written-bytes count separate from
            // SenseInfoLength; pass the full K_SENSE_SIZE and let
            // parse_sense key off byte 0's response code (fixed vs descriptor).
            let parsed = super::parse_sense(&sptwb.sense, K_SENSE_SIZE as u8);
            return Err(Error::ScsiError {
                opcode: cdb.first().copied().unwrap_or(0),
                status: sptwb.spt.ScsiStatus,
                sense: Some(parsed),
            });
        }

        // Clamp to the caller's buffer length, matching Linux/macOS: a
        // driver that reports DataTransferLength > data.len() must never let
        // callers read past the buffer they handed in.
        let transferred = (sptwb.spt.DataTransferLength as usize).min(data.len());

        // If we bounced a FROM-device read, copy the aligned scratch back
        // into the caller's buffer (only the bytes actually transferred).
        if needs_bounce && direction == DataDirection::FromDevice {
            let aligned_ptr = data_ptr; // points inside `bounce`
            unsafe {
                std::ptr::copy_nonoverlapping(aligned_ptr, data.as_mut_ptr(), transferred);
            }
        }
        // `bounce` is dropped here, after the last use of `data_ptr`.
        drop(bounce);

        let mut sense = [0u8; 32];
        sense.copy_from_slice(&sptwb.sense);

        Ok(ScsiResult {
            status: sptwb.spt.ScsiStatus,
            bytes_transferred: transferred,
            sense,
        })
    }
}

#[cfg(test)]
mod tests {
    use super::*;

    // Regression guard for `SptiTransport::reset()`: recomputes
    // IOCTL_STORAGE_RESET_DEVICE from the CTL_CODE formula, independently of
    // the hardcoded constant. See docs/scsi-windows.md — IOCTL_STORAGE_RESET_DEVICE derivation.
    #[test]
    fn ioctl_storage_reset_device_value_is_correct() {
        // CTL_CODE(DeviceType, Function, Method, Access) =
        //   (DeviceType << 16) | (Access << 14) | (Function << 2) | Method
        const fn ctl_code(device_type: u32, function: u32, method: u32, access: u32) -> u32 {
            (device_type << 16) | (access << 14) | (function << 2) | method
        }
        const IOCTL_STORAGE_BASE: u32 = 0x2D;
        const METHOD_BUFFERED: u32 = 0;
        const FILE_READ_ACCESS: u32 = 1;
        let expected = ctl_code(
            IOCTL_STORAGE_BASE,
            0x0401,
            METHOD_BUFFERED,
            FILE_READ_ACCESS,
        );

        assert_eq!(
            IOCTL_STORAGE_RESET_DEVICE, expected,
            "IOCTL_STORAGE_RESET_DEVICE must equal CTL_CODE(0x2D, 0x0401, \
             METHOD_BUFFERED, FILE_READ_ACCESS); a wrong value fails \
             ERROR_INVALID_FUNCTION and silently no-ops the reset"
        );
        assert_eq!(IOCTL_STORAGE_RESET_DEVICE, 0x002D_5004);
        // The two historically wrong values must never reappear.
        assert_ne!(IOCTL_STORAGE_RESET_DEVICE, 0x002D_1004);
        assert_ne!(IOCTL_STORAGE_RESET_DEVICE, 0x002D_D000);
    }

    // Regression guard: `StorageAdapterDescriptor` must match
    // `STORAGE_ADAPTER_DESCRIPTOR` (winioctl.h) field-for-field. See
    // docs/scsi-windows.md — StorageAdapterDescriptor field layout.
    #[test]
    fn storage_adapter_descriptor_matches_sdk_layout() {
        use std::mem::{offset_of, size_of};
        assert_eq!(offset_of!(StorageAdapterDescriptor, Version), 0);
        assert_eq!(offset_of!(StorageAdapterDescriptor, Size), 4);
        assert_eq!(
            offset_of!(StorageAdapterDescriptor, MaximumTransferLength),
            8
        );
        assert_eq!(
            offset_of!(StorageAdapterDescriptor, MaximumPhysicalPages),
            12
        );
        assert_eq!(offset_of!(StorageAdapterDescriptor, AlignmentMask), 16);
        assert_eq!(offset_of!(StorageAdapterDescriptor, AdapterUsesPio), 20);
        assert_eq!(offset_of!(StorageAdapterDescriptor, AdapterScansDown), 21);
        assert_eq!(offset_of!(StorageAdapterDescriptor, CommandQueueing), 22);
        assert_eq!(
            offset_of!(StorageAdapterDescriptor, AcceleratedTransfer),
            23
        );
        // The fields that were misplaced by the old `u8` BusType.
        assert_eq!(offset_of!(StorageAdapterDescriptor, BusType), 24);
        assert_eq!(offset_of!(StorageAdapterDescriptor, BusMajorVersion), 28);
        assert_eq!(offset_of!(StorageAdapterDescriptor, BusMinorVersion), 30);
        assert_eq!(size_of::<StorageAdapterDescriptor>(), 32);
    }

    // Regression guard for `ScsiPassThroughDirect`, cross-checked against
    // the SDK's `SCSI_PASS_THROUGH_DIRECT` (natural alignment, no pack).
    // Do NOT add `packed(4)` — see docs/scsi-windows.md — ScsiPassThroughDirect layout, cross-checked against SDK.
    #[test]
    #[cfg(target_pointer_width = "64")]
    fn scsi_pass_through_direct_matches_sdk_layout_win64() {
        use std::mem::{offset_of, size_of};
        assert_eq!(offset_of!(ScsiPassThroughDirect, Length), 0);
        assert_eq!(offset_of!(ScsiPassThroughDirect, DataTransferLength), 12);
        assert_eq!(offset_of!(ScsiPassThroughDirect, TimeOutValue), 16);
        assert_eq!(offset_of!(ScsiPassThroughDirect, DataBuffer), 24);
        assert_eq!(offset_of!(ScsiPassThroughDirect, SenseInfoOffset), 32);
        assert_eq!(offset_of!(ScsiPassThroughDirect, Cdb), 36);
        assert_eq!(size_of::<ScsiPassThroughDirect>(), 56);
        // `sense` immediately follows the 56-byte spt; SenseInfoOffset points
        // here via offset_of! in execute(), so this must stay consistent.
        assert_eq!(offset_of!(SptwbDirect, spt), 0);
        assert_eq!(offset_of!(SptwbDirect, sense), 56);
        assert_eq!(size_of::<SptwbDirect>(), 56 + K_SENSE_SIZE);
    }

    // Cross-checked against `STORAGE_PROPERTY_QUERY` (winioctl.h): both
    // enums are `int`-sized, so PropertyId@0, QueryType@4,
    // AdditionalParameters@8, size 12.
    #[test]
    fn storage_property_query_matches_sdk_layout() {
        use std::mem::{offset_of, size_of};
        assert_eq!(offset_of!(StoragePropertyQuery, PropertyId), 0);
        assert_eq!(offset_of!(StoragePropertyQuery, QueryType), 4);
        assert_eq!(offset_of!(StoragePropertyQuery, AdditionalParameters), 8);
        assert_eq!(size_of::<StoragePropertyQuery>(), 12);
    }

    // Cross-checked against the Windows SDK headers: each IOCTL is asserted
    // against an independent re-derivation of `CTL_CODE`, not just its
    // literal. See docs/scsi-windows.md — windows_ffi_constants_match_sdk test rationale.
    #[test]
    fn windows_ffi_constants_match_sdk() {
        // CTL_CODE re-derivation. FILE_DEVICE_CONTROLLER=0x4,
        // FILE_DEVICE_MASS_STORAGE=0x2D, METHOD_BUFFERED=0,
        // FILE_ANY_ACCESS=0, FILE_READ_ACCESS=1, FILE_WRITE_ACCESS=2.
        const fn ctl_code(dev: u32, func: u32, method: u32, access: u32) -> u32 {
            (dev << 16) | (access << 14) | (func << 2) | method
        }
        // ntddscsi.h: CTL_CODE(IOCTL_SCSI_BASE, 0x0405, METHOD_BUFFERED, READ|WRITE)
        assert_eq!(
            IOCTL_SCSI_PASS_THROUGH_DIRECT,
            ctl_code(0x4, 0x405, 0, 1 | 2)
        );
        // winioctl.h: CTL_CODE(IOCTL_STORAGE_BASE, 0x0500, METHOD_BUFFERED, ANY)
        assert_eq!(IOCTL_STORAGE_QUERY_PROPERTY, ctl_code(0x2D, 0x500, 0, 0));
        // winioctl.h: CTL_CODE(IOCTL_STORAGE_BASE, 0x0401, METHOD_BUFFERED, READ)
        assert_eq!(IOCTL_STORAGE_RESET_DEVICE, ctl_code(0x2D, 0x401, 0, 1));

        // winioctl.h STORAGE_PROPERTY_ID / STORAGE_QUERY_TYPE enums.
        assert_eq!(STORAGE_ADAPTER_PROPERTY, 1); // StorageAdapterProperty (Device=0, Adapter=1)
        assert_eq!(PROPERTY_STANDARD_QUERY, 0); // PropertyStandardQuery

        // ntddscsi.h SCSI_IOCTL_DATA_*.
        assert_eq!(SCSI_IOCTL_DATA_OUT, 0);
        assert_eq!(SCSI_IOCTL_DATA_IN, 1);
        assert_eq!(SCSI_IOCTL_DATA_UNSPECIFIED, 2);

        // winnt.h GENERIC_* / FILE_SHARE_* / FILE_ATTRIBUTE_*; fileapi.h OPEN_EXISTING.
        assert_eq!(GENERIC_READ, 0x8000_0000);
        assert_eq!(GENERIC_WRITE, 0x4000_0000);
        assert_eq!(FILE_SHARE_READ, 0x1);
        assert_eq!(FILE_SHARE_WRITE, 0x2);
        assert_eq!(OPEN_EXISTING, 3);
        assert_eq!(FILE_ATTRIBUTE_NORMAL, 0x80);
        assert_eq!(INVALID_HANDLE_VALUE, -1);
    }
}