libfreemkv/src/drive/mod.rs

//! Drive session — open, identify, and read from optical drives.
//!
//! A `Drive` is opened from a device path, identifies itself via INQUIRY,
//! optionally unlocks/initializes via the `freemkv-unlock` dispatch
//! (through [`crate::unlock_bridge`]), and reads sectors.

pub fn extract_scsi_context(e: &Error) -> (u8, Option<crate::scsi::ScsiSense>) {
    match e {
        Error::ScsiError { status, sense, .. } => (*status, *sense),
        Error::DiscRead { status, sense, .. } => (status.unwrap_or(0), *sense),
        // A failed `ioctl(SG_IO)` or vanished device is a dead-bus fault, not a
        // recoverable bad sector — map to SCSI_STATUS_TRANSPORT_FAILURE so sweep /
        // patch / fill_extents abort the pass instead of zero-filling a wedged device.
        Error::IoError { .. } | Error::DeviceNotFound { .. } => {
            (crate::scsi::SCSI_STATUS_TRANSPORT_FAILURE, None)
        }
        _ => (0, None),
    }
}

// Per-platform discovery helpers (the `pub(crate)` `find_drives` /
// equivalents). Crate-public so `scsi/{linux,macos,windows}.rs` can
// reuse the existing enumeration logic when shaping `DriveInfo`.
#[cfg(target_os = "linux")]
pub(crate) mod linux;
#[cfg(target_os = "macos")]
pub(crate) mod macos;
#[cfg(windows)]
pub(crate) mod windows;

// Pick the platform module ONCE, here, so the cross-platform entry points below
// dispatch through `platform::…` with no per-function `#[cfg]` in their bodies.
#[cfg(target_os = "linux")]
pub(crate) use linux as platform;
#[cfg(target_os = "macos")]
pub(crate) use macos as platform;
#[cfg(windows)]
pub(crate) use windows as platform;

use crate::error::{Error, Result};
use crate::event::Event;
use crate::identity::DriveId;
use crate::scsi::ScsiTransport;
use crate::sector::SectorSource;
use std::path::Path;
use std::sync::Arc;
use std::sync::atomic::{AtomicBool, Ordering};

/// Physical state of the drive tray and disc.
#[derive(Debug, Clone, Copy, PartialEq)]
pub enum DriveStatus {
    /// Tray is open
    TrayOpen,
    /// Tray closed, no disc
    NoDisc,
    /// Tray closed, disc present and ready
    DiscPresent,
    /// Drive is loading or spinning up
    NotReady,
    /// Could not determine status
    Unknown,
}

// SCSI opcodes used in drive control
const SCSI_TEST_UNIT_READY: u8 = 0x00;
const SCSI_START_STOP_UNIT: u8 = 0x1B;
/// Idle time the disc sits spun-down during [`Drive::spin_cycle`] before it's
/// spun back up — long enough for the mechanism's fast-fail wedge state to
/// clear. Validated at 5–6 s live.
const SPIN_DOWN_IDLE_SECS: u64 = 5;
/// Settle time after spin-up in [`Drive::spin_cycle`] before the caller reads
/// again, so the first post-cycle read doesn't hit a transient NOT_READY.
const SPIN_UP_SETTLE_SECS: u64 = 10;
const SCSI_PREVENT_ALLOW_MEDIUM_REMOVAL: u8 = 0x1E;
const SCSI_GET_EVENT_STATUS: u8 = 0x4A;
const SCSI_MODE_SENSE: u8 = 0x5A;
const SCSI_MODE_SELECT: u8 = 0x55;
const SCSI_REPORT_KEY: u8 = 0xA4;

// SBC/MMC Read-Write Error Recovery mode page. Flipping PER makes the drive
// REPORT recovered reads instead of silently returning best-effort GOOD data.
// See docs/drive-mod.md — Error-recovery mode page (PER bit).
const MODE_PAGE_ERROR_RECOVERY: u8 = 0x01;
/// Bit masks in the Read-Write Error Recovery flags byte (page byte 2).
const ERP_FLAG_TB: u8 = 0x20; // Transfer Block: still deliver the recovered data
const ERP_FLAG_PER: u8 = 0x04; // Post Error: report recovered errors
const ERP_FLAG_DTE: u8 = 0x02; // Data Terminate on Error: MUST be off (we want the data)
/// `Parameters Saveable` bit in a mode page's byte 0 — valid only on MODE SENSE;
/// must be cleared before echoing the page back in a MODE SELECT.
const MODE_PAGE_PS_BIT: u8 = 0x80;
/// MODE SENSE(10) parameter header length (bytes), preceding any block
/// descriptors and the mode pages.
const MODE10_HEADER_LEN: usize = 8;

/// Optical disc drive session -- open, identify, unlock, and read.
pub struct Drive {
    scsi: Box<dyn ScsiTransport>,
    /// Name of the unlocker that handled this drive at `init()`, if any matched.
    /// `None` means no unlocker matched and the drive runs in stock mode
    /// (host-cert AACS handshake carries discs).
    unlocker_name: Option<String>,
    /// The OEM Volume ID the matching unlocker returned from `unlock()` at
    /// `init()`, stashed for the AACS handshake phase (which reads it via
    /// [`Drive::oem_vid`] instead of a separate VID read). `None` when no
    /// unlocker matched or the matching unlocker produced no VID — the cert
    /// handshake then acquires the VID.
    oem_vid: Option<[u8; 16]>,
    /// True once `init()` has run (whether or not an unlocker matched).
    init_ran: bool,
    /// Lazily-computed registry-match name for `platform_name()`'s `&str`
    /// return before `init()` has run.
    matched_name_cache: std::sync::OnceLock<String>,
    pub drive_id: DriveId,
    device_path: String,
    /// Halt flag — when set, Drive::read() bails at the next check point.
    halt: Arc<AtomicBool>,
    /// Event handler — fires for read errors and library-level state changes.
    event_fn: Option<Box<dyn Fn(Event) + Send>>,
    /// The SINGLE AACS bus-encryption removal point. Decided ONCE from the
    /// unlock/handshake result during [`crate::disc::Disc::scan`] and applied on
    /// every read below this drive, so every reader above (sampler, mux, sweep,
    /// validation) sees already-de-bussed content and never threads a bus key.
    /// Defaults to [`BusStage::Passthrough`](crate::sector::bus_removal::BusStage)
    /// (firmware/vendor unlock de-busses at the drive, or the disc carries no bus
    /// encryption).
    bus_stage: crate::sector::bus_removal::BusStage,
    /// Encrypted-content extent map (sorted `(start_lba, sector_count)`) that
    /// gates the host-key de-bus to content sectors — clear UDF/nav sectors read
    /// during a whole-disc pass are left untouched. `None` = de-bus every read
    /// sector (a content-only reader). Ignored entirely under
    /// `BusStage::Passthrough`. See docs/drive-mod.md — bus-removal wiring.
    bus_content_ranges: Option<Arc<[(u32, u32)]>>,
    /// Linux only: raw fd for the corresponding block device (`/dev/sr*`)
    /// used as a recovery fallback when SCSI READ via `/dev/sg*` returns
    /// an error. The kernel `sr_mod` driver auto-retries failed reads
    /// (~5× per command) — historically the reason `dd if=/dev/sr0`
    /// recovers ~50% of bad sectors that single-shot `SG_IO` READ
    /// misses on the same drive. `None` when the block device couldn't
    /// be resolved or opened (no fallback in that case; SCSI read
    /// errors propagate as before).
    #[cfg(target_os = "linux")]
    block_dev_fd: Option<std::os::unix::io::RawFd>,
}

impl Drive {
    pub fn open(device: &Path) -> Result<Self> {
        let t0 = std::time::Instant::now();
        tracing::info!(target: "freemkv::drive", phase = "open", device = %device.display(), "begin");
        let mut transport = crate::scsi::open(device)?;
        let drive_id = DriveId::from_drive(transport.as_mut())?;
        tracing::info!(
            target: "freemkv::drive",
            phase = "open",
            device = %device.display(),
            vendor = %drive_id.vendor_id.trim(),
            product = %drive_id.product_id.trim(),
            elapsed_ms = t0.elapsed().as_millis() as u64,
            "end"
        );

        #[cfg(target_os = "linux")]
        let block_dev_fd = open_block_device_for_sg(device);

        Ok(Drive {
            scsi: transport,
            unlocker_name: None,
            oem_vid: None,
            init_ran: false,
            matched_name_cache: std::sync::OnceLock::new(),
            drive_id,
            device_path: device.to_string_lossy().to_string(),
            halt: Arc::new(AtomicBool::new(false)),
            event_fn: None,
            bus_stage: crate::sector::bus_removal::BusStage::Passthrough,
            bus_content_ranges: None,
            #[cfg(target_os = "linux")]
            block_dev_fd,
        })
    }

    /// Set the SINGLE AACS bus-removal stage for this drive, decided once from
    /// the unlock/handshake result. `AacsHostKey(rdk)` de-busses each content
    /// read in software; `Passthrough` (a firmware/vendor unlock, or a non-bus
    /// disc) is a no-op. Every reader above the drive inherits the result.
    pub fn set_bus_stage(&mut self, stage: crate::sector::bus_removal::BusStage) {
        self.bus_stage = stage;
    }

    /// Gate host-key de-bussing to the disc's encrypted-content extents (sorted
    /// `(start_lba, sector_count)`), so clear UDF/nav sectors read during a
    /// whole-disc pass are left untouched. Set after the disc structure is parsed
    /// (see [`crate::disc::Disc::encrypted_content_ranges`]); unset means every
    /// read sector is treated as content.
    pub fn set_bus_content_ranges(&mut self, ranges: Arc<[(u32, u32)]>) {
        self.bus_content_ranges = Some(ranges);
    }

    /// The SOLE application of AACS bus decryption in the read path: under a
    /// host-key stage, de-bus the `data` that a raw read landed at `lba`, gated
    /// to the encrypted-content ranges. `Passthrough` is a no-op, so the raw
    /// `read`/`read_fua` used by internal callers stay bus-encrypted while
    /// `SectorSource` readers above see plaintext content.
    fn remove_bus_encryption(&self, lba: u32, data: &mut [u8]) {
        if let crate::sector::bus_removal::BusStage::AacsHostKey(rdk) = &self.bus_stage {
            crate::aacs::content::decrypt_bus_in_content(
                data,
                rdk,
                lba,
                self.bus_content_ranges.as_deref(),
            );
        }
    }

    // Test-only constructor: build a `Drive` over an arbitrary `ScsiTransport`
    // (no profile, no platform driver, no block-device fallback) so
    // command-builder/response-parser logic can be exercised against a mock.
    #[cfg(test)]
    pub(crate) fn from_transport_for_test(scsi: Box<dyn ScsiTransport>) -> Self {
        Drive {
            scsi,
            unlocker_name: None,
            oem_vid: None,
            init_ran: false,
            matched_name_cache: std::sync::OnceLock::new(),
            drive_id: DriveId {
                vendor_id: String::new(),
                product_id: String::new(),
                product_revision: String::new(),
                vendor_specific: String::new(),
                firmware_date: String::new(),
                serial_number: String::new(),
                raw_inquiry: Vec::new(),
                raw_gc_010c: Vec::new(),
            },
            device_path: "test".to_string(),
            halt: Arc::new(AtomicBool::new(false)),
            event_fn: None,
            bus_stage: crate::sector::bus_removal::BusStage::Passthrough,
            bus_content_ranges: None,
            #[cfg(target_os = "linux")]
            block_dev_fd: None,
        }
    }

    /// Test-only: mark the drive as claimed by a named firmware unlocker at
    /// init(), so the do_handshake_cert anti-poison guard can be exercised.
    #[cfg(test)]
    pub(crate) fn set_unlocker_name_for_test(&mut self, name: &str) {
        self.unlocker_name = Some(name.to_string());
    }

    /// Test-only: stash the OEM Volume ID a matching unlocker would have
    /// returned at init(), so `do_handshake_cert`'s OEM-VID short-circuit
    /// (skip the cert handshake, credit `drive_unlocked`) can be exercised.
    #[cfg(test)]
    pub(crate) fn set_oem_vid_for_test(&mut self, vid: [u8; 16]) {
        self.oem_vid = Some(vid);
    }

    /// Get a clone of the halt flag. Set to true to interrupt Drive::read().
    pub fn halt_flag(&self) -> Arc<AtomicBool> {
        self.halt.clone()
    }

    /// Halt the drive — Drive::read() will bail at the next check point.
    pub fn halt(&self) {
        self.halt.store(true, Ordering::Relaxed);
    }

    /// Clear the halt flag for the next operation.
    pub fn clear_halt(&self) {
        self.halt.store(false, Ordering::Relaxed);
    }

    /// Set an event handler for read recovery events.
    pub fn on_event(&mut self, f: impl Fn(Event) + Send + 'static) {
        self.event_fn = Some(Box::new(f));
    }

    fn is_halted(&self) -> bool {
        self.halt.load(Ordering::Relaxed)
    }

    // Halt-aware SCSI execute: returns `Err(Halted)` if the flag is set before
    // dispatch or by completion. Keeps Drive::read free of explicit halt checks.
    fn checked_exec(
        &mut self,
        cdb: &[u8],
        dir: crate::scsi::DataDirection,
        buf: &mut [u8],
        timeout_ms: u32,
    ) -> Result<crate::scsi::ScsiResult> {
        if self.is_halted() {
            return Err(Error::Halted);
        }
        let r = self.scsi.as_mut().execute(cdb, dir, buf, timeout_ms)?;
        if self.is_halted() {
            return Err(Error::Halted);
        }
        Ok(r)
    }

    /// Close the drive cleanly. Unlocks the tray and closes the fd.
    /// Also runs automatically on Drop as a safety net.
    pub fn close(self) {
        // cleanup() runs here via Drop
    }

    /// Shared cleanup — called by Drop (and thus by close).
    fn cleanup(&mut self) {
        self.unlock_tray();
    }

    /// Whether an unlocker claims this drive by identity (i.e. it can be
    /// unlocked at drive-prep). Queried via `freemkv-unlock`; does not require
    /// `init()` to have run.
    pub fn has_profile(&self) -> bool {
        crate::unlock_bridge::unlocker_name(&self.drive_id).is_some()
    }

    /// The name of the drive unlocker that ACTUALLY unlocked this drive at
    /// `init()`, or `None` if none applied (unsupported drive, or the unlock
    /// failed). Distinct from [`has_profile`](Self::has_profile), which reports
    /// only an identity match: this is the runtime outcome. Apps render it in the
    /// user-facing unlocker report.
    pub fn unlocker_name(&self) -> Option<&str> {
        self.unlocker_name.as_deref()
    }

    /// Access the SCSI transport for direct commands (used by CSS/AACS auth).
    pub fn scsi_mut(&mut self) -> &mut dyn ScsiTransport {
        self.scsi.as_mut()
    }

    // The OEM Volume ID a matching unlocker returned at Drive::init, if any.
    // AACS uses it to skip the cert handshake. None if no unlocker matched.
    pub(crate) fn oem_vid(&self) -> Option<[u8; 16]> {
        self.oem_vid
    }

    pub fn wait_ready(&mut self) -> Result<()> {
        let tur = [SCSI_TEST_UNIT_READY, 0x00, 0x00, 0x00, 0x00, 0x00];
        let t0 = std::time::Instant::now();
        tracing::info!(target: "freemkv::drive", phase = "wait_ready", "begin");

        // The poll can take up to 30s (60 × 500ms). Heartbeat it so a slow
        // spin-up is visible as steady beats rather than a silent stall.
        let mut hb = crate::progress::Heartbeat::new("wait_ready");
        for attempt in 0..60u64 {
            hb.tick(attempt, 60);
            let mut buf = [0u8; 0];
            // `checked_exec`, not bare `execute`: this poll (60 x 500 ms = ~30 s) must
            // see `self.halt`, or a Stop during cold spin-up is ignored for half a
            // minute. A TUR that FAILS is just not-ready-yet and keeps the loop going.
            match self.checked_exec(&tur, crate::scsi::DataDirection::None, &mut buf, 5_000) {
                Ok(_) => {
                    tracing::info!(
                        target: "freemkv::drive",
                        phase = "wait_ready",
                        attempts = attempt + 1,
                        elapsed_ms = t0.elapsed().as_millis() as u64,
                        "end"
                    );
                    return Ok(());
                }
                Err(Error::Halted) => return Err(Error::Halted),
                // A dead bus (transport failure / disconnected drive) will never spin
                // up — surface it immediately instead of polling a phantom for 30 s. A
                // plain not-ready TUR failure falls through and keeps the loop going.
                Err(e) if e.is_scsi_transport_failure() => return Err(e),
                Err(_) => {}
            }
            // Halt-aware backoff: the flag can also flip DURING the 500 ms
            // gap, which is where most of the 30 s is actually spent.
            sleep_until_halted(&self.halt, std::time::Duration::from_millis(500))?;
        }
        tracing::warn!(
            target: "freemkv::drive",
            phase = "wait_ready",
            elapsed_ms = t0.elapsed().as_millis() as u64,
            "device never became ready"
        );
        Err(Error::DeviceNotReady {
            path: self.device_path.clone(),
        })
    }

    /// Query the physical state of the drive — disc present, tray open, etc.
    /// Uses GET EVENT STATUS NOTIFICATION which works regardless of firmware state.
    pub fn drive_status(&mut self) -> DriveStatus {
        // GET EVENT STATUS NOTIFICATION: polled, media event class (0x10)
        let cdb = [
            SCSI_GET_EVENT_STATUS,
            0x01,
            0x00,
            0x00,
            0x10,
            0x00,
            0x00,
            0x00,
            0x08,
            0x00,
        ];
        let mut buf = [0u8; 8];
        let reply = self.scsi.as_mut().execute(
            &cdb,
            crate::scsi::DataDirection::FromDevice,
            &mut buf,
            5_000,
        );

        // MMC-6 §6.7: byte 5 is Media Status only when the Event Header (NEA flag +
        // Notification Class) announces a Media Event Descriptor. Otherwise decoding
        // it reads as "no disc" for untrusted input, so fall back to TUR instead.
        const NEA: u8 = 0x80;
        const NOTIFICATION_CLASS_MASK: u8 = 0x07;
        const NOTIFICATION_CLASS_MEDIA: u8 = 0x04;
        // Bytes 2..7: the 2 remaining header bytes plus the 4-byte Media Event
        // Descriptor — the shortest reply in which byte 5 exists and is a Media
        // Status.
        const MIN_DESCRIPTOR_LENGTH: u16 = 6;

        let media_status = match reply {
            Ok(r) if r.bytes_transferred >= 6 => {
                let descriptor_len = u16::from_be_bytes([buf[0], buf[1]]);
                let class = buf[2] & NOTIFICATION_CLASS_MASK;
                if buf[2] & NEA == 0
                    && class == NOTIFICATION_CLASS_MEDIA
                    && descriptor_len >= MIN_DESCRIPTOR_LENGTH
                {
                    Some(buf[5])
                } else {
                    tracing::debug!(
                        target: "freemkv::drive",
                        nea = buf[2] & NEA != 0,
                        class,
                        descriptor_len,
                        "get event status carried no media event descriptor"
                    );
                    None
                }
            }
            _ => None,
        };

        match media_status {
            Some(media_status) => {
                // Bits 1-0: door/tray state
                // Bit 1: media present, Bit 0: tray open
                match media_status & 0x03 {
                    0x00 => DriveStatus::NoDisc,      // tray closed, no disc
                    0x01 => DriveStatus::TrayOpen,    // tray open, no media
                    0x02 => DriveStatus::DiscPresent, // tray closed, disc present
                    // 0x03 = tray-open AND media-present both set: a contradictory,
                    // transient state. Don't report ready — autorip must not start on
                    // a drive that's still settling — so treat as tray-open.
                    0x03 => DriveStatus::TrayOpen,
                    _ => DriveStatus::Unknown,
                }
            }
            None => {
                // Fallback: try TUR
                let tur = [SCSI_TEST_UNIT_READY, 0x00, 0x00, 0x00, 0x00, 0x00];
                let mut empty = [0u8; 0];
                match self.scsi.as_mut().execute(
                    &tur,
                    crate::scsi::DataDirection::None,
                    &mut empty,
                    5_000,
                ) {
                    Ok(_) => DriveStatus::DiscPresent,
                    Err(ref e)
                        if e.scsi_sense()
                            .is_some_and(|s| s.is_not_ready() || s.is_unit_attention()) =>
                    {
                        DriveStatus::NotReady
                    }
                    _ => DriveStatus::Unknown,
                }
            }
        }
    }

    /// Name of the unlocker handling this drive. After `init()` this is the
    /// unlocker that ran; before `init()` it reflects the unlocker match by
    /// identity. `"Unknown"` when no unlocker matches.
    pub fn platform_name(&self) -> &str {
        if let Some(ref n) = self.unlocker_name {
            return n;
        }
        // Cache the unlocker match so we can hand out a `&str` borrow.
        self.matched_name_cache.get_or_init(|| {
            crate::unlock_bridge::unlocker_name(&self.drive_id)
                .map(str::to_string)
                .unwrap_or_else(|| "Unknown".to_string())
        })
    }

    pub fn device_path(&self) -> &str {
        &self.device_path
    }

    // Current mounted-disc profile from GET CONFIGURATION (Current Profile,
    // bytes 6-7). DVD is 0x0010..=0x001F, BD 0x0040..=0x0043. Stock MMC
    // command, works before any drive unlock. None if unreadable.
    fn current_profile(&mut self) -> Option<u16> {
        let cdb = [
            crate::scsi::SCSI_GET_CONFIGURATION,
            0x00, // RT=0: header carries the Current Profile
            0x00,
            0x00, // starting feature 0
            0x00,
            0x00,
            0x00,
            0x00,
            0x08, // allocation length = 8 (header only)
            0x00,
        ];
        let mut buf = [0u8; 8];
        let r = self
            .scsi
            .as_mut()
            .execute(
                &cdb,
                crate::scsi::DataDirection::FromDevice,
                &mut buf,
                5_000,
            )
            .ok()?;
        if r.bytes_transferred >= 8 {
            Some(((buf[6] as u16) << 8) | buf[7] as u16)
        } else {
            None
        }
    }

    /// True when the mounted disc is a DVD (profile family `0x0010..=0x001F`).
    pub(crate) fn disc_is_dvd(&mut self) -> bool {
        matches!(self.current_profile(), Some(p) if (0x0010..=0x001F).contains(&p))
    }

    /// Initialize drive — drive-prep unlock + init.
    /// Optional. Adds features: removes riplock, enables UHD reads, speed control.
    ///
    /// The drive-prep (OEM) unlock is required for BD/UHD (AACS) reads,
    /// but it puts the drive in an extended-access state where stock CSS
    /// authentication no longer works — so a CSS-protected DVD can't be read.
    /// For a DVD we therefore SKIP the unlock and run the drive in its normal
    /// stock mode; the DVD path then issues standard CSS commands, which a stock
    /// drive honors. BD/UHD and any non-DVD/unknown media keep today's behavior.
    pub fn init(&mut self) -> Result<()> {
        let t0 = std::time::Instant::now();
        tracing::info!(target: "freemkv::drive", phase = "init", "begin");
        // Drive-prep runs for EVERY disc, DVD INCLUDED — drive features are
        // disc-independent; AACS/CSS handshakes run LATER, gated on disc kind. A
        // transport fault aborts init (v1.1.0 invariant); other errors fall through.
        self.init_ran = true;
        let (matched, unlock_res) =
            crate::unlock_bridge::run_features(self.scsi.as_mut(), &self.drive_id);
        let r: Result<()> = match unlock_res {
            Ok(Some(unlocked)) => {
                // Record which firmware unlocker ran, not the id-only lookup.
                self.unlocker_name = Some(matched.to_string());
                // Stash the OEM Volume ID (best-effort: a transient miss leaves
                // the drive unlocked with no VID). do_handshake reads `oem_vid()`.
                if let Some(vid) = unlocked.vid {
                    self.oem_vid = Some(vid);
                }
                Ok(())
            }
            // No firmware unlocker claimed the drive — a stock/cert-only drive;
            // the AACS cert route runs later at the handshake phase.
            Ok(None) => Ok(()),
            Err(freemkv_unlock::UnlockError::Transport) => Err(Error::ScsiError {
                opcode: 0,
                status: crate::scsi::SCSI_STATUS_TRANSPORT_FAILURE,
                sense: None,
            }),
            Err(_) => Ok(()),
        };
        // Raise to max read speed UNCONDITIONALLY whenever the bus is alive, for
        // ANY disc type — DVD included, and even a stock-mode drive with no
        // firmware unlocker still wants it. Best-effort: failure must NOT fail the rip.
        if r.is_ok() {
            self.set_speed(Self::SPEED_MAX_KBPS);
            // Ask the drive to REPORT recovered/marginal reads instead of silently
            // committing best-effort data as GOOD (the dirty-disc "passed-clean-but-
            // decodes-with-errors" trap). Best-effort: unsupported drives keep defaults.
            self.enable_recovered_error_reporting();
        }
        tracing::info!(
            target: "freemkv::drive",
            phase = "init",
            ok = r.is_ok(),
            unlocker = self.unlocker_name.as_deref().unwrap_or("none"),
            elapsed_ms = t0.elapsed().as_millis() as u64,
            "end"
        );
        r
    }

    /// No-op retained for API stability. Disc-speed calibration is now
    /// unlocker-specific and runs inside the unlocker's `unlock()` at `init()`
    /// (for every disc, including DVD), so there is nothing to do here — this
    /// only emits the begin/end trace span. Kept so existing callers and the
    /// `probe_disc_without_unlocker_is_ok_noop` test need not change.
    pub fn probe_disc(&mut self) -> Result<()> {
        let t0 = std::time::Instant::now();
        tracing::info!(target: "freemkv::drive", phase = "probe_disc", "begin");
        // Disc-speed calibration is unlocker-specific and now lives inside
        // the unlocker's `unlock()` (run at `init()`, for every disc including
        // DVD). Nothing to do here — no disc-type branch.
        tracing::info!(
            target: "freemkv::drive",
            phase = "probe_disc",
            elapsed_ms = t0.elapsed().as_millis() as u64,
            "end (calibration handled by unlocker at init)"
        );
        Ok(())
    }

    /// Query a specific GET CONFIGURATION feature by code.
    /// Returns the feature data (without the 8-byte header), or None if not available.
    pub fn get_config_feature(&mut self, feature_code: u16) -> Option<Vec<u8>> {
        let cdb = [
            crate::scsi::SCSI_GET_CONFIGURATION,
            0x02,
            (feature_code >> 8) as u8,
            feature_code as u8,
            0x00,
            0x00,
            0x00,
            0x01,
            0x00,
            0x00,
        ];
        let mut buf = vec![0u8; 256];
        let r = self
            .scsi
            .as_mut()
            .execute(
                &cdb,
                crate::scsi::DataDirection::FromDevice,
                &mut buf,
                5_000,
            )
            .ok()?;
        // Clamp the transport-reported count to the buffer length: a
        // misbehaving driver/bridge could report more bytes than the
        // buffer holds, which would panic the slice.
        let end = r.bytes_transferred.min(buf.len());
        if end > 8 {
            Some(buf[8..end].to_vec())
        } else {
            None
        }
    }

    /// Read REPORT KEY RPC state (region playback control).
    pub fn report_key_rpc_state(&mut self) -> Option<Vec<u8>> {
        let cdb = [
            SCSI_REPORT_KEY,
            0x00,
            0x00,
            0x00,
            0x00,
            0x00,
            0x00,
            0x00,
            0x00,
            0x08,
            0x08,
            0x00,
        ];
        let mut buf = vec![0u8; 8];
        let r = self
            .scsi
            .as_mut()
            .execute(
                &cdb,
                crate::scsi::DataDirection::FromDevice,
                &mut buf,
                5_000,
            )
            .ok()?;
        let end = r.bytes_transferred.min(buf.len());
        if end > 0 {
            Some(buf[..end].to_vec())
        } else {
            None
        }
    }

    /// Read MODE SENSE page data.
    pub fn mode_sense_page(&mut self, page: u8) -> Option<Vec<u8>> {
        let cdb = [
            SCSI_MODE_SENSE,
            0x00,
            page,
            0x00,
            0x00,
            0x00,
            0x00,
            0x00,
            0xFC,
            0x00,
        ];
        let mut buf = vec![0u8; 252];
        let r = self
            .scsi
            .as_mut()
            .execute(
                &cdb,
                crate::scsi::DataDirection::FromDevice,
                &mut buf,
                5_000,
            )
            .ok()?;
        let end = r.bytes_transferred.min(buf.len());
        if end > 0 {
            Some(buf[..end].to_vec())
        } else {
            None
        }
    }

    /// Ask the drive to REPORT recovered/marginal reads instead of silently
    /// returning best-effort data as GOOD status. MODE SENSE the Read-Write
    /// Error Recovery page, flip `PER` (and `TB` on / `DTE` off so we still get
    /// the data), and MODE SELECT it back — preserving the drive's own retry
    /// count and other bits.
    ///
    /// Best-effort: a drive that doesn't support the page, or rejects the
    /// SELECT, simply keeps its default behaviour. Returns whether the page
    /// was successfully written.
    pub fn enable_recovered_error_reporting(&mut self) -> bool {
        let Some(sense) = self.mode_sense_page(MODE_PAGE_ERROR_RECOVERY) else {
            tracing::debug!(target: "freemkv::drive", "MODE SENSE error-recovery page unavailable; leaving drive defaults");
            return false;
        };
        let Some(payload) = build_error_recovery_select_payload(&sense) else {
            tracing::debug!(target: "freemkv::drive", "error-recovery page malformed/short; leaving drive defaults");
            return false;
        };
        // MODE SELECT(10): PF=1 (page format), parameter list length = payload.
        let len = payload.len() as u16;
        let cdb = [
            SCSI_MODE_SELECT,
            0x10, // PF=1, SP=0 (don't persist across power cycles)
            0x00,
            0x00,
            0x00,
            0x00,
            0x00,
            (len >> 8) as u8,
            len as u8,
            0x00,
        ];
        let mut buf = payload;
        match self.checked_exec(&cdb, crate::scsi::DataDirection::ToDevice, &mut buf, 5_000) {
            Ok(_) => {
                tracing::info!(target: "freemkv::drive", phase = "error_recovery", "recovered-error reporting enabled (PER=1) — marginal reads will surface instead of committing silently");
                true
            }
            Err(e) => {
                tracing::debug!(target: "freemkv::drive", error = %e, "MODE SELECT error-recovery page rejected; leaving drive defaults");
                false
            }
        }
    }

    /// Read vendor-specific READ BUFFER data.
    pub fn read_buffer(&mut self, mode: u8, buffer_id: u8, length: u16) -> Option<Vec<u8>> {
        let cdb = crate::scsi::build_read_buffer(mode, buffer_id, 0, length as u32);
        let mut buf = vec![0u8; length as usize];
        let r = self
            .scsi
            .as_mut()
            .execute(
                &cdb,
                crate::scsi::DataDirection::FromDevice,
                &mut buf,
                5_000,
            )
            .ok()?;
        let end = r.bytes_transferred.min(buf.len());
        if end > 0 {
            Some(buf[..end].to_vec())
        } else {
            None
        }
    }

    pub fn is_ready(&self) -> bool {
        // Ready once init() has run and an unlocker handled the drive.
        self.init_ran && self.unlocker_name.is_some()
    }

    /// Whether libfreemkv should take the OEM extended-access read path.
    ///
    /// True when an unlocker claims this drive by identity. Such an unlocker
    /// unlocks *drive functionality* — drive unlock, OEM VID retrieval, and other
    /// vendor capabilities. When one matches, libfreemkv routes both `unlock` and
    /// OEM VID through it (VID via the OEM path is decoupled from the host cert +
    /// HRL). This mirrors [`Self::has_profile`] — the honest signal is "an
    /// unlocker claims this drive" — rather than the old const `false`.
    pub fn is_unlocked(&self) -> bool {
        crate::unlock_bridge::unlocker_name(&self.drive_id).is_some()
    }

    /// Read sectors from the disc. Single-shot — no inline retries, no
    /// SCSI reset.
    ///
    /// `recovery=true` uses [`crate::scsi::READ_RECOVERY_TIMEOUT_MS`] (60 s,
    /// matches sg_dd) for the `freemkv_engine::recovery::patch` pass;
    /// `recovery=false` uses [`crate::scsi::READ_TIMEOUT_MS`] (10 s) for
    /// `freemkv_engine::recovery::copy`'s fast skip-forward sweep. On any
    /// failure returns `Err(DiscRead)` immediately; orchestration handles
    /// retry policy. See docs/drive-mod.md — single-shot contract.
    pub fn read(&mut self, lba: u32, count: u16, buf: &mut [u8], recovery: bool) -> Result<usize> {
        // Bulk path: FUA off (the drive cache IS the streaming throughput).
        self.read_fua(lba, count, buf, recovery, false)
    }

    /// [`read`], but with an explicit Force Unit Access request: `fua = true`
    /// sets the READ(10) FUA bit so the drive re-fetches the medium instead of
    /// returning a cached copy — the Pass-N marginal-sector lever (see
    /// [`crate::sector::SectorSource::read_sectors_fua`]). The bulk sweep always
    /// passes `false`; only a per-sector recovery handler asks for FUA.
    ///
    /// [`read`]: Drive::read
    pub fn read_fua(
        &mut self,
        lba: u32,
        count: u16,
        buf: &mut [u8],
        recovery: bool,
        fua: bool,
    ) -> Result<usize> {
        let timeout_ms = if recovery {
            crate::scsi::READ_RECOVERY_TIMEOUT_MS
        } else {
            crate::scsi::READ_TIMEOUT_MS
        };
        // TRACE, not DEBUG: this fires on every read (hundreds of thousands per
        // rip). At DEBUG it floods a bug-report log and buries the real events.
        tracing::trace!(
            target: "freemkv::drive",
            lba,
            count,
            recovery,
            timeout_ms,
            "Drive::read enter"
        );

        // Cap each CDB to the transport's max data-in transfer: a single READ past the
        // adapter limit fails outright on some backends (e.g. Windows SPTI, where a
        // 16 MiB read exceeds MaximumTransferLength and we'd mis-read it as transport failure).
        let max_sectors = (self.scsi.max_transfer_bytes() / 2048).max(1) as u32;
        if count as u32 <= max_sectors {
            return self.read_one(lba, count, buf, timeout_ms, recovery, fua);
        }

        // Large read: split into `max_sectors`-sized chunks, each a self-contained
        // READ(10). Any chunk error reports that chunk's LBA, not the base LBA.
        let count = count as u32;
        // Check the caller's buffer ONCE, up front: the chunk loop slices `buf` by
        // `count * 2048`, and without this an undersized buffer PANICKED out of the
        // public `read`/`read_fua` instead of returning `Err(DiscRead)` like the single-chunk path.
        if buf.len() < count as usize * 2048 {
            return Err(Error::DiscRead {
                sector: lba as u64,
                status: None,
                sense: None,
            });
        }
        // The whole range must be addressable: READ(10) carries a 32-bit LBA, so a
        // request crossing `u32::MAX` has no valid CDB. `lba + done` was unchecked —
        // a debug panic, or in release a wrap to a low LBA read and returned as requested.
        if lba.checked_add(count.saturating_sub(1)).is_none() {
            return Err(Error::DiscRead {
                sector: lba as u64,
                status: None,
                sense: None,
            });
        }
        let mut done: u32 = 0;
        let mut total: usize = 0;
        while done < count {
            let chunk = (count - done).min(max_sectors);
            let cur_lba = lba + done;
            let byte_off = done as usize * 2048;
            let byte_len = chunk as usize * 2048;
            let slice = &mut buf[byte_off..byte_off + byte_len];
            let n = self.read_one(cur_lba, chunk as u16, slice, timeout_ms, recovery, fua)?;
            total += n;
            done += chunk;
        }
        Ok(total)
    }

    // Single READ(10) for up to `count` sectors at `lba`, timeout already
    // resolved by the caller. On failure returns `Err(DiscRead)` with
    // `sector = lba`; a short transfer is treated as a failed read.
    fn read_one(
        &mut self,
        lba: u32,
        count: u16,
        buf: &mut [u8],
        timeout_ms: u32,
        // `recovery` gates only the Linux /dev/sr0 pread fallback below; on
        // other platforms it is intentionally unused.
        #[cfg_attr(not(target_os = "linux"), allow(unused_variables))] recovery: bool,
        // FUA (Force Unit Access): when set, byte-1 bit 0x08 forces the drive to
        // re-fetch the medium past its cache.
        fua: bool,
    ) -> Result<usize> {
        // FUA is OFF on the bulk path: forcing every READ(10) past the cache disabled
        // readahead on the sequential sweep and collapsed throughput ~10x (UHD → ~2
        // MB/s, DVD → ~0.5 MB/s). Set ONLY per marginal-sector re-read by FuaRetry (#55).
        let cdb = [
            crate::scsi::SCSI_READ_10,
            if fua { 0x08 } else { 0x00 },
            (lba >> 24) as u8,
            (lba >> 16) as u8,
            (lba >> 8) as u8,
            lba as u8,
            0x00,
            (count >> 8) as u8,
            count as u8,
            0x00,
        ];

        match self.checked_exec(
            &cdb,
            crate::scsi::DataDirection::FromDevice,
            buf,
            timeout_ms,
        ) {
            Ok(result) if result.bytes_transferred == count as usize * 2048 => {
                Ok(result.bytes_transferred)
            }
            // GOOD status with a residual underrun is a SHORT transfer: `buf`'s tail
            // holds stale bytes, so fail (NonTrimmed, retried) rather than commit stale
            // data — and log it, so it isn't indistinguishable from a scratched disc.
            Ok(result) => {
                tracing::warn!(
                    target: "freemkv::drive",
                    lba,
                    count,
                    transferred = result.bytes_transferred,
                    expected = count as usize * 2048,
                    code = crate::error::E_DISC_READ,
                    "READ(10) returned GOOD status with a residual underrun; refusing the short transfer"
                );
                Err(Error::DiscRead {
                    sector: lba as u64,
                    status: None,
                    sense: None,
                })
            }
            Err(Error::Halted) => Err(Error::Halted),
            Err(e) => {
                let (status, sense) = extract_scsi_context(&e);
                tracing::warn!(
                    target: "freemkv::drive",
                    lba,
                    count,
                    inner_error = %e,
                    scsi_status = status,
                    "Drive::read checked_exec failed"
                );

                // /dev/sr0 pread fallback (Linux only): sr_mod auto-retries reads
                // (~5x). Empirically (BU40N + UHD disc, 2026-05-08) this recovers
                // ~50% of bad sectors that a single-shot SG_IO READ misses.
                #[cfg(target_os = "linux")]
                if recovery
                    && let Some(fd) = self.block_dev_fd
                    && buf.len() >= count as usize * 2048
                {
                    let len = count as usize * 2048;
                    let offset = lba as i64 * 2048;
                    // Drop kernel cache for this region so we get
                    // a fresh device read, not stale page-cache
                    // data from a prior successful neighbour read.
                    let _ = unsafe {
                        libc::posix_fadvise(fd, offset, len as i64, libc::POSIX_FADV_DONTNEED)
                    };
                    let n = unsafe {
                        libc::pread(fd, buf.as_mut_ptr() as *mut libc::c_void, len, offset)
                    };
                    if n == len as isize {
                        tracing::info!(
                            target: "freemkv::drive",
                            lba,
                            count,
                            bytes = len,
                            "Drive::read recovered via /dev/sr0 pread fallback"
                        );
                        return Ok(len);
                    }
                    tracing::debug!(
                        target: "freemkv::drive",
                        lba,
                        count,
                        pread_ret = n as i64,
                        errno = std::io::Error::last_os_error().raw_os_error().unwrap_or(0),
                        "/dev/sr0 pread fallback also failed"
                    );
                }

                Err(Error::DiscRead {
                    sector: lba as u64,
                    status: Some(status),
                    sense,
                })
            }
        }
    }

    /// Read the disc capacity in sectors (2048 bytes each).
    pub fn read_capacity(&mut self) -> Result<u32> {
        let cdb = [
            crate::scsi::SCSI_READ_CAPACITY,
            0x00,
            0x00,
            0x00,
            0x00,
            0x00,
            0x00,
            0x00,
            0x00,
            0x00,
        ];
        let mut buf = [0u8; 8];
        let result = self.scsi.as_mut().execute(
            &cdb,
            crate::scsi::DataDirection::FromDevice,
            &mut buf,
            5_000,
        )?;
        decode_read_capacity(&buf, result.bytes_transferred)
    }

    /// SET CD SPEED "use the drive's maximum" sentinel (0xFFFF KB/s per MMC).
    pub const SPEED_MAX_KBPS: u16 = 0xFFFF;

    pub fn set_speed(&mut self, speed_kbs: u16) {
        let cdb = crate::scsi::build_set_cd_speed(speed_kbs);
        let mut dummy = [0u8; 0];
        if let Err(e) = self.scsi_execute(&cdb, crate::scsi::DataDirection::None, &mut dummy, 5_000)
        {
            tracing::warn!(target: "freemkv::drive", error = %e, "SET CD SPEED failed");
        }
    }

    /// Lock the tray so the disc cannot be ejected during a rip.
    pub fn lock_tray(&mut self) {
        let prevent = [
            SCSI_PREVENT_ALLOW_MEDIUM_REMOVAL,
            0x00,
            0x00,
            0x00,
            0x01,
            0x00,
        ];
        let mut buf = [0u8; 0];
        if let Err(e) =
            self.scsi
                .as_mut()
                .execute(&prevent, crate::scsi::DataDirection::None, &mut buf, 5_000)
        {
            tracing::warn!(target: "freemkv::drive", error = %e, "PREVENT MEDIUM REMOVAL failed");
        }
    }

    /// Unlock the tray so the user can manually eject the disc.
    pub fn unlock_tray(&mut self) {
        let allow = [
            SCSI_PREVENT_ALLOW_MEDIUM_REMOVAL,
            0x00,
            0x00,
            0x00,
            0x00,
            0x00,
        ];
        let mut buf = [0u8; 0];
        // Best-effort (the tray-unlock is advisory), but a failure is worth a warn!
        // rather than a silent `let _`: a stuck PREVENT lock is a real symptom the
        // operator otherwise never sees until the tray won't open.
        if let Err(e) =
            self.scsi
                .as_mut()
                .execute(&allow, crate::scsi::DataDirection::None, &mut buf, 5_000)
        {
            tracing::warn!(
                target: "freemkv::drive",
                phase = "unlock_tray",
                error_code = e.code(),
                "Failed to clear the medium-removal PREVENT lock; the tray may stay locked until the drive is power-cycled."
            );
        }
    }

    /// Eject the disc tray. Unlocks first, then ejects.
    pub fn eject(&mut self) -> Result<()> {
        self.unlock_tray();
        let eject_cdb = [SCSI_START_STOP_UNIT, 0, 0, 0, 0x02, 0];
        let mut buf = [0u8; 0];
        self.scsi.as_mut().execute(
            &eject_cdb,
            crate::scsi::DataDirection::None,
            &mut buf,
            30_000,
        )?;
        Ok(())
    }

    /// Soft power-cycle the drive mechanism WITHOUT ejecting: spin the disc
    /// down (`START STOP UNIT`, START=0, **LOEJ=0**) then back up (START=1).
    /// This clears the BU40N/Initio fast-fail *wedge* state that a run of
    /// `HARDWARE_ERROR` reads leaves the drive in — the non-eject equivalent of
    /// the power-cycle our notes say the wedge needs. The disc stays loaded (the
    /// BU40N is slot-loading; we NEVER eject to recover — a hands-on eject is a
    /// failure for an unattended service). Validated live 2026-07-01: took the
    /// drive from failing-every-read back to reading at MB/s.
    pub fn spin_cycle(&mut self) -> Result<()> {
        let stop = [SCSI_START_STOP_UNIT, 0, 0, 0, 0x00, 0]; // START=0, LOEJ=0 → spin down
        let start = [SCSI_START_STOP_UNIT, 0, 0, 0, 0x01, 0]; // START=1, LOEJ=0 → spin up
        let mut buf = [0u8; 0];
        // `checked_exec` + `sleep_until_halted`, not blind `thread::sleep`: this ~15 s
        // wait runs from the recovery path, exactly when Stop is likely pressed. A
        // half-finished spin cycle is fine — the next command spins the drive back up.
        self.checked_exec(&stop, crate::scsi::DataDirection::None, &mut buf, 30_000)?;
        sleep_until_halted(
            &self.halt,
            std::time::Duration::from_secs(SPIN_DOWN_IDLE_SECS),
        )?;
        self.checked_exec(&start, crate::scsi::DataDirection::None, &mut buf, 30_000)?;
        sleep_until_halted(
            &self.halt,
            std::time::Duration::from_secs(SPIN_UP_SETTLE_SECS),
        )?;
        Ok(())
    }

    pub fn scsi_execute(
        &mut self,
        cdb: &[u8],
        direction: crate::scsi::DataDirection,
        buf: &mut [u8],
        timeout_ms: u32,
    ) -> Result<crate::scsi::ScsiResult> {
        self.scsi.as_mut().execute(cdb, direction, buf, timeout_ms)
    }
}

impl Drop for Drive {
    fn drop(&mut self) {
        self.cleanup();
        // SgIoTransport::drop() runs next, calling libc::close(fd)
        #[cfg(target_os = "linux")]
        if let Some(fd) = self.block_dev_fd.take() {
            unsafe { libc::close(fd) };
        }
    }
}

// Resolve a `/dev/sg*` path to its `/dev/sr*` block device via sysfs, open
// for read (no O_DIRECT). None on any error ("no fallback available").
// See docs/drive-mod.md — open_block_device_for_sg.
#[cfg(target_os = "linux")]
fn open_block_device_for_sg(sg_path: &Path) -> Option<std::os::unix::io::RawFd> {
    let basename = sg_path.file_name()?.to_str()?;
    if !basename.starts_with("sg") {
        return None;
    }
    let sysfs_dir = format!("/sys/class/scsi_generic/{}/device/block", basename);
    let entries = std::fs::read_dir(&sysfs_dir).ok()?;
    let block_name = entries
        .flatten()
        .find_map(|e| e.file_name().into_string().ok())?;
    let block_path = format!("/dev/{}", block_name);

    let mut bytes = block_path.as_bytes().to_vec();
    bytes.push(0);
    let fd = unsafe {
        libc::open(
            bytes.as_ptr() as *const libc::c_char,
            libc::O_RDONLY | libc::O_CLOEXEC,
        )
    };
    if fd < 0 {
        tracing::debug!(
            target: "freemkv::drive",
            sg = basename,
            block_path,
            errno = std::io::Error::last_os_error().raw_os_error().unwrap_or(0),
            "Failed to open block device for fallback; sr0 fallback disabled"
        );
        None
    } else {
        tracing::info!(
            target: "freemkv::drive",
            sg = basename,
            block_path,
            fd,
            "Opened /dev/sr* as recovery fallback for failed SCSI reads"
        );
        Some(fd)
    }
}

impl SectorSource for Drive {
    fn read_sectors(
        &mut self,
        lba: u32,
        count: u16,
        buf: &mut [u8],
        recovery: bool,
    ) -> Result<usize> {
        let n = self.read(lba, count, buf, recovery)?;
        self.remove_bus_encryption(lba, &mut buf[..n]);
        Ok(n)
    }

    fn read_sectors_fua(
        &mut self,
        lba: u32,
        count: u16,
        buf: &mut [u8],
        recovery: bool,
        fua: bool,
    ) -> Result<usize> {
        let n = self.read_fua(lba, count, buf, recovery, fua)?;
        self.remove_bus_encryption(lba, &mut buf[..n]);
        Ok(n)
    }

    fn set_speed(&mut self, kbs: u16) {
        Drive::set_speed(self, kbs);
    }
}

/// Find an optical drive on this system and open it, **preferring a drive
/// that currently has media**.
///
/// Opens each candidate in enumeration order and returns the first reporting
/// [`DriveStatus::DiscPresent`] via [`Drive::drive_status`]; falls back to
/// the first drive that opened if none report a disc. For just listing
/// drives without opening, use `scsi::list_drives()` instead.
/// See docs/drive-mod.md — find_drive selection policy.
pub fn find_drive() -> Option<Drive> {
    #[cfg(target_os = "macos")]
    let candidates = crate::scsi::list_drives()
        .into_iter()
        .map(|info| info.path)
        .collect::<Vec<_>>();

    #[cfg(not(target_os = "macos"))]
    let candidates = discover_drives()
        .into_iter()
        .map(|(path, _)| path)
        .collect::<Vec<_>>();

    let opened =
        candidates
            .into_iter()
            .filter_map(|path| match Drive::open(std::path::Path::new(&path)) {
                Ok(drive)
                    if !drive.drive_id.raw_inquiry.is_empty()
                        && (drive.drive_id.raw_inquiry[0] & 0x1F) == 0x05 =>
                {
                    Some(drive)
                }
                Ok(drive) => {
                    tracing::debug!(
                        target: "freemkv::drive",
                        path,
                        "skipping non-optical SCSI device during drive selection"
                    );
                    drop(drive);
                    None
                }
                Err(error) => {
                    tracing::warn!(
                        target: "freemkv::drive",
                        path,
                        error = %error,
                        "drive open failed during autodetection"
                    );
                    None
                }
            });
    select_drive_with_media(opened)
}

#[cfg(not(target_os = "macos"))]
fn discover_drives() -> Vec<(String, DriveId)> {
    platform::find_drives()
}

// Pick a drive preferring DiscPresent status, falling back to the first
// yielded. Split from find_drive so it's unit-testable without hardware.
fn select_drive_with_media(drives: impl Iterator<Item = Drive>) -> Option<Drive> {
    let mut fallback: Option<Drive> = None;
    for mut drive in drives {
        if drive.drive_status() == DriveStatus::DiscPresent {
            return Some(drive);
        }
        // Remember the first drive that opened as the no-media fallback so
        // single-drive / status-unavailable setups still get a drive.
        if fallback.is_none() {
            fallback = Some(drive);
        }
    }
    fallback
}

// MODE SENSE(10) Error Recovery page -> MODE SELECT(10) payload enabling
// recovered-error reporting (PER/TB set, DTE/PS cleared), other bits kept.
// None if too short or not the error-recovery page.
fn build_error_recovery_select_payload(sense: &[u8]) -> Option<Vec<u8>> {
    if sense.len() < MODE10_HEADER_LEN {
        return None;
    }
    let block_desc_len = u16::from_be_bytes([sense[6], sense[7]]) as usize;
    let page_off = MODE10_HEADER_LEN.checked_add(block_desc_len)?;
    // Need page byte 0 (code), byte 1 (length), byte 2 (flags).
    if page_off.checked_add(3)? > sense.len() {
        return None;
    }
    if sense[page_off] & 0x3F != MODE_PAGE_ERROR_RECOVERY {
        return None;
    }
    let mut payload = sense.to_vec();
    // Header: mode-data-length is reserved on SELECT — zero it.
    payload[0] = 0;
    payload[1] = 0;
    // Page byte 0: clear PS (SENSE-only).
    payload[page_off] &= !MODE_PAGE_PS_BIT;
    // Flags byte: PER on, TB on, DTE off. Retry count (next byte) untouched.
    payload[page_off + 2] |= ERP_FLAG_PER | ERP_FLAG_TB;
    payload[page_off + 2] &= !ERP_FLAG_DTE;
    Some(payload)
}

// Decode a READ CAPACITY(10) response into a sector count. A short transfer
// (<4 bytes, would decode a bogus 1-sector disc) is DiscCapacityMalformed;
// the 0xFFFF_FFFF sentinel (last_lba+1 overflows u32) is DiscCapacityOverflow.
pub(crate) fn decode_read_capacity(buf: &[u8; 8], bytes_transferred: usize) -> Result<u32> {
    if bytes_transferred < 4 {
        return Err(Error::DiscCapacityMalformed);
    }
    let last_lba = u32::from_be_bytes([buf[0], buf[1], buf[2], buf[3]]);
    last_lba.checked_add(1).ok_or(Error::DiscCapacityOverflow)
}

// Halt-aware sleep primitive — wakes within ~100 ms of `halt` flipping true,
// returning Error::Halted. Used by wait_ready's poll backoff and
// spin_cycle's spin-down/settle pauses. See docs/drive-mod.md — sleep_until_halted.
fn sleep_until_halted(halt: &AtomicBool, total: std::time::Duration) -> Result<()> {
    const SLICE: std::time::Duration = std::time::Duration::from_millis(100);
    let deadline = std::time::Instant::now() + total;
    loop {
        if halt.load(Ordering::Relaxed) {
            return Err(Error::Halted);
        }
        let now = std::time::Instant::now();
        if now >= deadline {
            return Ok(());
        }
        let remaining = deadline - now;
        std::thread::sleep(remaining.min(SLICE));
    }
}

/// Structured outcome of [`resolve_device`] — a machine-readable signal
/// (no English prose) the application layer can render however it likes.
#[derive(Debug, Clone, Copy, PartialEq, Eq)]
pub enum DeviceResolution {
    /// Path resolved directly to a SCSI-generic device; no substitution.
    Direct,
    /// A `/dev/sr*` block path was substituted with the matching
    /// `/dev/sg*` SCSI-generic device for raw access (Linux only).
    SrToSg,
    /// A `/dev/sr*` block path was given but no matching `/dev/sg*`
    /// device could be found; the original path is returned (Linux only).
    SrNoSgMatch,
}

// Resolve a device path to its raw SCSI device; returns the resolved path
// plus a DeviceResolution signal. Staged, not yet wired — allow(dead_code)
// is deliberate. See docs/drive-mod.md — resolve_device.
#[allow(dead_code)]
pub(crate) fn resolve_device(path: &str) -> Result<(String, DeviceResolution)> {
    platform::resolve_device(path)
}

#[cfg(test)]
mod halt_tests {
    use super::*;
    use std::time::{Duration, Instant};

    #[test]
    fn sleep_until_halted_completes_when_not_halted() {
        let flag = AtomicBool::new(false);
        let t0 = Instant::now();
        let r = sleep_until_halted(&flag, Duration::from_millis(150));
        assert!(r.is_ok());
        assert!(t0.elapsed() >= Duration::from_millis(140));
    }

    #[test]
    fn sleep_until_halted_returns_immediately_if_preflagged() {
        let flag = AtomicBool::new(true);
        let t0 = Instant::now();
        let r = sleep_until_halted(&flag, Duration::from_secs(10));
        assert!(matches!(r, Err(Error::Halted)));
        // Must wake within one slice (100 ms) — the whole point of the
        // primitive is that a 30 s sleep doesn't block Stop.
        assert!(t0.elapsed() < Duration::from_millis(200));
    }

    #[test]
    fn sleep_until_halted_wakes_mid_sleep() {
        let flag = Arc::new(AtomicBool::new(false));
        let f2 = flag.clone();
        let t0 = Instant::now();
        std::thread::spawn(move || {
            std::thread::sleep(Duration::from_millis(150));
            f2.store(true, Ordering::Relaxed);
        });
        let r = sleep_until_halted(&flag, Duration::from_secs(10));
        assert!(matches!(r, Err(Error::Halted)));
        let waited = t0.elapsed();
        // The sleep must end because the flag flipped, not the 10 s timeout; the lower
        // bound rules out returning early otherwise. Upper bound was 350 ms but that
        // measures the scheduler: a loaded CI runner hit 377 ms and failed for no reason.
        assert!(waited < Duration::from_secs(2), "waited {waited:?}");
        assert!(waited >= Duration::from_millis(140), "waited {waited:?}");
    }

    #[test]
    fn sleep_until_halted_zero_duration_is_noop_when_not_halted() {
        let flag = AtomicBool::new(false);
        let r = sleep_until_halted(&flag, Duration::ZERO);
        assert!(r.is_ok());
    }

    #[test]
    fn read_capacity_short_transfer_is_rejected() {
        // bytes_transferred < 4 must NOT decode to capacity=1 from
        // zero-init bytes.
        let buf = [0u8; 8];
        assert!(matches!(
            decode_read_capacity(&buf, 0),
            Err(Error::DiscCapacityMalformed)
        ));
        assert!(matches!(
            decode_read_capacity(&buf, 3),
            Err(Error::DiscCapacityMalformed)
        ));
    }

    #[test]
    fn read_capacity_full_transfer_decodes_last_lba_plus_one() {
        // last_lba = 0x00012344 -> capacity 0x00012345.
        let buf = [0x00, 0x01, 0x23, 0x44, 0, 0, 0, 0];
        assert_eq!(decode_read_capacity(&buf, 8).unwrap(), 0x0001_2345);
    }

    #[test]
    fn read_capacity_overflow_is_rejected() {
        // last_lba = u32::MAX (the "capacity exceeds 32-bit" sentinel) -> +1
        // overflows; reported as the distinct DiscCapacityOverflow, not the
        // short-transfer DiscCapacityMalformed.
        let buf = [0xFF, 0xFF, 0xFF, 0xFF, 0, 0, 0, 0];
        assert!(matches!(
            decode_read_capacity(&buf, 8),
            Err(Error::DiscCapacityOverflow)
        ));
    }
}

#[cfg(test)]
mod command_tests {
    use super::*;
    use crate::scsi::{DataDirection, ScsiResult, ScsiTransport};

    // Minimal MODE SENSE(10) reply carrying the Error Recovery page (0x01)
    // with the given flags/retry, no block descriptors. `ps` sets the page's
    // PS bit (SENSE-only), which the SELECT payload must clear.
    fn mode_sense_error_recovery(flags: u8, retry: u8, ps: bool) -> Vec<u8> {
        let mut v = vec![0u8; MODE10_HEADER_LEN + 12];
        // Header: nonzero mode-data-length (must be zeroed on SELECT); no block
        // descriptors.
        v[0] = 0x00;
        v[1] = 0x22;
        v[6] = 0x00;
        v[7] = 0x00; // block descriptor length = 0
        let po = MODE10_HEADER_LEN;
        v[po] = MODE_PAGE_ERROR_RECOVERY | if ps { MODE_PAGE_PS_BIT } else { 0 };
        v[po + 1] = 0x0A; // page length
        v[po + 2] = flags; // error-recovery flags
        v[po + 3] = retry; // read retry count
        v
    }

    #[test]
    fn error_recovery_payload_sets_per_tb_clears_dte_ps_preserves_retry() {
        // Start with PER off, DTE on, PS on, a specific retry count. The SELECT
        // payload must flip PER on, TB on, DTE off, clear PS, zero the header
        // mode-data-length, and leave the retry count untouched.
        let sense = mode_sense_error_recovery(ERP_FLAG_DTE, 0x2C, true);
        let out = build_error_recovery_select_payload(&sense).expect("valid page");
        let po = MODE10_HEADER_LEN;
        assert_eq!(out[0], 0, "header mode-data-length zeroed for SELECT");
        assert_eq!(out[1], 0);
        assert_eq!(out[po] & MODE_PAGE_PS_BIT, 0, "PS cleared for SELECT");
        assert_eq!(out[po] & 0x3F, MODE_PAGE_ERROR_RECOVERY, "still page 0x01");
        assert_eq!(out[po + 2] & ERP_FLAG_PER, ERP_FLAG_PER, "PER set");
        assert_eq!(
            out[po + 2] & ERP_FLAG_TB,
            ERP_FLAG_TB,
            "TB set (still get data)"
        );
        assert_eq!(
            out[po + 2] & ERP_FLAG_DTE,
            0,
            "DTE cleared (don't terminate)"
        );
        assert_eq!(out[po + 3], 0x2C, "read retry count preserved");
    }

    #[test]
    fn error_recovery_payload_honors_block_descriptor_offset() {
        // With an 8-byte block descriptor between header and page, the function
        // must locate the page at header+desc, not a fixed offset.
        let mut sense = vec![0u8; MODE10_HEADER_LEN + 8 + 12];
        sense[7] = 8; // block descriptor length
        let po = MODE10_HEADER_LEN + 8;
        sense[po] = MODE_PAGE_ERROR_RECOVERY;
        sense[po + 1] = 0x0A;
        sense[po + 2] = 0x00;
        let out = build_error_recovery_select_payload(&sense).expect("valid");
        assert_eq!(
            out[po + 2] & ERP_FLAG_PER,
            ERP_FLAG_PER,
            "PER set at the descriptor-offset page"
        );
    }

    #[test]
    fn error_recovery_payload_rejects_wrong_or_short_page() {
        // Wrong page code → None (leave drive at defaults).
        let mut wrong = mode_sense_error_recovery(0, 0, false);
        wrong[MODE10_HEADER_LEN] = 0x08; // page 0x08 (caching), not 0x01
        assert!(build_error_recovery_select_payload(&wrong).is_none());
        // Too short to hold the header → None, no panic.
        assert!(build_error_recovery_select_payload(&[0u8; 4]).is_none());
        // Header claims a block descriptor that runs off the buffer → None.
        let mut bad = mode_sense_error_recovery(0, 0, false);
        bad[7] = 0xF0; // descriptor length way past the buffer
        assert!(build_error_recovery_select_payload(&bad).is_none());
    }

    // Boundary for the 3-byte page header guard (page_off + 3 > sense.len()):
    // exactly-enough length must be accepted, not rejected by a `>=` mutation.
    #[test]
    fn error_recovery_payload_accepts_exact_minimum_length() {
        // No block descriptors: page starts right after the 8-byte header.
        // Page needs exactly 3 bytes (code, length, flags) -> total 11.
        let mut sense = vec![0u8; MODE10_HEADER_LEN + 3];
        let po = MODE10_HEADER_LEN;
        sense[po] = MODE_PAGE_ERROR_RECOVERY;
        sense[po + 1] = 0x00; // page length field (unused by this function)
        sense[po + 2] = ERP_FLAG_DTE; // flags: DTE on, PER/TB off
        let out = build_error_recovery_select_payload(&sense)
            .expect("page_off + 3 == len is exactly enough room, must be accepted");
        assert_eq!(out[po + 2] & ERP_FLAG_PER, ERP_FLAG_PER, "PER set");
        assert_eq!(out[po + 2] & ERP_FLAG_DTE, 0, "DTE cleared");
    }

    /// Mock transport: returns a fixed data payload (copied into the
    /// caller's buffer, truncated to fit) on every `execute()`.
    struct FixedTransport {
        payload: Vec<u8>,
    }

    impl ScsiTransport for FixedTransport {
        fn execute(
            &mut self,
            _cdb: &[u8],
            _direction: DataDirection,
            data: &mut [u8],
            _timeout_ms: u32,
        ) -> Result<ScsiResult> {
            let n = self.payload.len().min(data.len());
            data[..n].copy_from_slice(&self.payload[..n]);
            Ok(ScsiResult {
                status: 0,
                bytes_transferred: n,
                sense: [0u8; 32],
            })
        }
    }

    fn drive_with(payload: Vec<u8>) -> Drive {
        Drive::from_transport_for_test(Box::new(FixedTransport { payload }))
    }

    // AACS bus-removal tests (the drive's single de-bus point): a clear "content"
    // buffer with plaintext first-16-of-each-sector (bus enc leaves those clear on
    // the wire) and a known 16..2048 pattern; `sectors` exercises cross-sector gating.
    fn clear_bus_content(sectors: usize) -> Vec<u8> {
        let mut v = vec![0u8; sectors * 2048];
        for (i, b) in v.iter_mut().enumerate() {
            *b = (i as u8).wrapping_mul(31).wrapping_add(7);
        }
        v
    }

    // Passthrough (the default) is a no-op: every read byte comes back verbatim,
    // even when the wire happens to be clear content.
    #[test]
    fn bus_passthrough_read_returns_bytes_unchanged() {
        use crate::sector::SectorSource;
        let clear = clear_bus_content(3);
        let mut d = drive_with(clear.clone());
        let mut got = vec![0u8; clear.len()];
        let n = d.read_sectors(0, 3, &mut got, false).unwrap();
        assert_eq!(n, clear.len());
        assert_eq!(got, clear, "default Passthrough must not alter any byte");
    }

    // Host-key stage de-busses at read time: a bus-ENCRYPTED wire comes back as
    // the known plaintext. MUTATION: leaving `bus_stage` Passthrough (dropping the
    // de-bus call) returns ciphertext, so this goes red.
    #[test]
    fn bus_host_key_removes_bus_encryption_at_read() {
        use crate::sector::SectorSource;
        let rdk = [0x5Au8; 16];
        let clear = clear_bus_content(3);
        let mut wire = clear.clone();
        crate::aacs::content::encrypt_bus(&mut wire, &rdk); // model the drive's forward bus transform
        assert_ne!(wire, clear, "fixture must actually be bus-encrypted");

        let mut d = drive_with(wire);
        d.set_bus_stage(crate::sector::bus_removal::BusStage::AacsHostKey(rdk));
        let mut got = vec![0u8; clear.len()];
        let n = d.read_sectors(0, 3, &mut got, false).unwrap();
        assert_eq!(n, clear.len());
        assert_eq!(
            got, clear,
            "AacsHostKey must recover the plaintext byte-for-byte"
        );
    }

    // The FUA read path applies the same single de-bus step (the per-sector
    // recovery lever must not ship ciphertext).
    #[test]
    fn bus_host_key_removes_bus_encryption_on_fua_read() {
        use crate::sector::SectorSource;
        let rdk = [0x5Au8; 16];
        let clear = clear_bus_content(3);
        let mut wire = clear.clone();
        crate::aacs::content::encrypt_bus(&mut wire, &rdk);

        let mut d = drive_with(wire);
        d.set_bus_stage(crate::sector::bus_removal::BusStage::AacsHostKey(rdk));
        let mut got = vec![0u8; clear.len()];
        let n = d.read_sectors_fua(0, 3, &mut got, false, true).unwrap();
        assert_eq!(n, clear.len());
        assert_eq!(got, clear, "the FUA path must de-bus too");
    }

    // Content-range gating: a sector OUTSIDE the encrypted-content extents is
    // clear filesystem/nav and must pass through untouched — de-bussing it would
    // corrupt plaintext. LBA 0 is outside content [300,303).
    #[test]
    fn bus_content_ranges_pass_through_sectors_outside_content() {
        use crate::sector::SectorSource;
        let rdk = [0x5Au8; 16];
        let clear = clear_bus_content(1); // clear filesystem sector on the wire
        let mut d = drive_with(clear.clone());
        d.set_bus_stage(crate::sector::bus_removal::BusStage::AacsHostKey(rdk));
        d.set_bus_content_ranges(std::sync::Arc::from(
            vec![(300u32, 3u32)].into_boxed_slice(),
        ));
        let mut got = vec![0u8; clear.len()];
        // LBA 0 is outside content → no de-bus → bytes unchanged.
        let n = d.read_sectors(0, 1, &mut got, false).unwrap();
        assert_eq!(n, clear.len());
        assert_eq!(
            got, clear,
            "a sector outside content must pass through untouched"
        );
    }

    // The complement: a bus-encrypted sector INSIDE the content map is de-bussed.
    #[test]
    fn bus_content_ranges_debus_sectors_inside_content() {
        use crate::sector::SectorSource;
        let rdk = [0x33u8; 16];
        let clear = clear_bus_content(3);
        let mut wire = clear.clone();
        crate::aacs::content::encrypt_bus(&mut wire, &rdk);
        let mut d = drive_with(wire);
        d.set_bus_stage(crate::sector::bus_removal::BusStage::AacsHostKey(rdk));
        d.set_bus_content_ranges(std::sync::Arc::from(
            vec![(300u32, 3u32)].into_boxed_slice(),
        ));
        let mut got = vec![0u8; clear.len()];
        // Read the 3 content sectors at LBA 300 → all inside → de-bussed to plaintext.
        let n = d.read_sectors(300, 3, &mut got, false).unwrap();
        assert_eq!(n, clear.len());
        assert_eq!(got, clear, "content sectors must be de-bussed to plaintext");
    }

    // Partial gating within one read: content [301,302) covers only the middle
    // sector of a 3-sector read at LBA 300. Only that sector is de-bussed; the
    // clear neighbours (300, 302) pass through untouched.
    #[test]
    fn bus_content_ranges_gate_per_sector_within_a_read() {
        use crate::sector::SectorSource;
        let rdk = [0x44u8; 16];
        // Sector 1 is bus-encrypted content; sectors 0 and 2 are clear on the wire.
        let clear = clear_bus_content(3);
        let mut wire = clear.clone();
        let mut mid = clear[2048..4096].to_vec();
        crate::aacs::content::encrypt_bus(&mut mid, &rdk); // encrypt only the middle sector's body
        wire[2048..4096].copy_from_slice(&mid);

        let mut d = drive_with(wire);
        d.set_bus_stage(crate::sector::bus_removal::BusStage::AacsHostKey(rdk));
        d.set_bus_content_ranges(std::sync::Arc::from(
            vec![(301u32, 1u32)].into_boxed_slice(),
        ));
        let mut got = vec![0u8; clear.len()];
        d.read_sectors(300, 3, &mut got, false).unwrap();
        // All three sectors come back as the known plaintext: 0 and 2 were clear
        // and untouched; 1 was de-bussed back to clear.
        assert_eq!(
            got, clear,
            "only the in-range sector is de-bussed; clear neighbours untouched"
        );
    }

    // F1 fail-safe: an AacsHostKey stage with an EMPTY content map must de-bus
    // NOTHING (empty `Some([])`), not everything — Disc::scan always installs the
    // map now, so a host-key disc that parsed no titles leaves clear sectors alone.
    #[test]
    fn bus_empty_content_ranges_debus_nothing() {
        use crate::sector::SectorSource;
        let rdk = [0x7Eu8; 16];
        let clear = clear_bus_content(2);
        let mut wire = clear.clone();
        crate::aacs::content::encrypt_bus(&mut wire, &rdk);
        let mut d = drive_with(wire.clone());
        d.set_bus_stage(crate::sector::bus_removal::BusStage::AacsHostKey(rdk));
        // Empty map = "no content anywhere" → de-bus nothing (fail-safe).
        d.set_bus_content_ranges(std::sync::Arc::from(
            Vec::<(u32, u32)>::new().into_boxed_slice(),
        ));
        let mut got = vec![0u8; clear.len()];
        d.read_sectors(300, 2, &mut got, false).unwrap();
        assert_eq!(
            got, wire,
            "empty content map must leave every sector untouched (still bus-encrypted), \
             never de-bus clear bytes into garbage"
        );
    }

    // scan()'s handshake→bus_stage wiring, via the `wire_bus_removal` seam. CERT
    // route: a Some(rdk) handshake arms AacsHostKey + installs the content map, so
    // an in-range bus-encrypted sector is de-bussed to plaintext.
    #[test]
    fn wire_bus_removal_cert_route_arms_host_key_and_ranges() {
        use crate::sector::SectorSource;
        let rdk = [0x6Bu8; 16];
        let clear = clear_bus_content(1);
        let mut wire = clear.clone();
        crate::aacs::content::encrypt_bus(&mut wire, &rdk);
        let mut d = drive_with(wire);
        crate::disc::Disc::wire_bus_removal(&mut d, Some(rdk), vec![(300u32, 3u32)]);
        let mut got = vec![0u8; clear.len()];
        d.read_sectors(300, 1, &mut got, false).unwrap();
        assert_eq!(
            got, clear,
            "Some(read_data_key) must arm AacsHostKey + ranges so content is de-bussed"
        );
    }

    // FIRMWARE/vendor route: a None handshake maps to Passthrough, so even an
    // in-range sector is NOT de-bussed. MUTATION: mapping None to AacsHostKey
    // would corrupt these bytes here.
    #[test]
    fn wire_bus_removal_firmware_route_is_passthrough() {
        use crate::sector::SectorSource;
        let rdk = [0x6Bu8; 16];
        let clear = clear_bus_content(1);
        let mut wire = clear.clone();
        crate::aacs::content::encrypt_bus(&mut wire, &rdk); // still bus-encrypted on the wire
        let mut d = drive_with(wire.clone());
        crate::disc::Disc::wire_bus_removal(&mut d, None, vec![(300u32, 3u32)]);
        let mut got = vec![0u8; clear.len()];
        d.read_sectors(300, 1, &mut got, false).unwrap();
        assert_eq!(
            got, wire,
            "None must map to Passthrough — no host-side de-bus, bytes returned verbatim"
        );
    }

    #[test]
    fn read_capacity_normal_adds_one() {
        // last_lba = 0x0000_0063 (99) → capacity 100 sectors.
        let mut d = drive_with(vec![0x00, 0x00, 0x00, 0x63, 0x00, 0x00, 0x08, 0x00]);
        assert_eq!(d.read_capacity().unwrap(), 100);
    }

    #[test]
    fn read_capacity_sentinel_does_not_overflow() {
        // last_lba = 0xFFFF_FFFF is the "capacity exceeds 32-bit" sentinel;
        // +1 would overflow. Must surface DiscCapacityOverflow, not panic
        // (debug) or wrap to 0 (release).
        let mut d = drive_with(vec![0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x08, 0x00]);
        assert!(matches!(
            d.read_capacity(),
            Err(Error::DiscCapacityOverflow)
        ));
    }

    // disc_is_dvd() must match ONLY the DVD profile family (0x0010..=0x001F).
    // See docs/drive-mod.md — disc_is_dvd_matches_only_dvd_profile_family.
    #[test]
    fn disc_is_dvd_matches_only_dvd_profile_family() {
        let probe = |profile: u16| {
            let mut hdr = vec![0u8; 8];
            hdr[6] = (profile >> 8) as u8;
            hdr[7] = profile as u8;
            drive_with(hdr).disc_is_dvd()
        };
        // DVD family → DVD (skip drive unlock, run stock for CSS).
        assert!(probe(0x0010), "DVD-ROM");
        assert!(probe(0x0011), "DVD-R");
        assert!(probe(0x001B), "DVD+R DL");
        // BD/UHD family → NOT DVD (must keep today's unlock path).
        assert!(!probe(0x0040), "BD-ROM (UHD) must NOT be classed as DVD");
        assert!(!probe(0x0041), "BD-R");
        assert!(!probe(0x0008), "CD-ROM");
        assert!(!probe(0x0000), "no/unknown profile");
        // Short / failed GET CONFIGURATION → no Current Profile → NOT DVD,
        // so the drive unlock still runs (safe default).
        assert!(
            !drive_with(vec![0u8; 4]).disc_is_dvd(),
            "short GET CONFIGURATION must default to not-DVD (unlock still runs)"
        );
    }

    // A conformant GET EVENT STATUS NOTIFICATION reply with one Media Event
    // Descriptor (MMC-6 §6.7): Event Header (bytes 0-3) + Media Event
    // Descriptor whose byte 1 (reply byte 5) is the Media Status.
    fn media_event_reply(media_status: u8) -> Vec<u8> {
        let mut buf = vec![0u8; 8];
        buf[0..2].copy_from_slice(&6u16.to_be_bytes()); // 6 bytes follow
        buf[2] = 0x04; // NEA = 0, Notification Class 4 = Media
        buf[3] = 0x10; // Supported Event Classes: media
        buf[4] = 0x00; // Event Code: NoChg
        buf[5] = media_status;
        buf
    }

    #[test]
    fn drive_status_tray_open_and_media_present_is_not_ready_to_rip() {
        // Media Status low bits = 0b11 (tray-open AND media-present,
        // contradictory). Must NOT report DiscPresent.
        let mut d = drive_with(media_event_reply(0x03));
        assert_eq!(d.drive_status(), DriveStatus::TrayOpen);
    }

    #[test]
    fn drive_status_disc_present_maps_correctly() {
        // Media Status 0x02 = media present, tray closed.
        let mut d = drive_with(media_event_reply(0x02));
        assert_eq!(d.drive_status(), DriveStatus::DiscPresent);
    }

    // Byte 5 is a Media Status only when NEA is clear AND class == Media;
    // otherwise it must fall back to TUR, not decode a reserved byte.
    // See docs/drive-mod.md — media-status decoding.
    #[test]
    fn drive_status_rejects_a_reply_carrying_no_media_event_descriptor() {
        // NEA = 1: "No Event Available" — no descriptor was returned, so the
        // bytes after the header are not a Media Event Descriptor.
        let mut nea = media_event_reply(0x00);
        nea[2] = 0x80 | 0x04;
        let mut d = drive_with(nea);
        assert_ne!(
            d.drive_status(),
            DriveStatus::NoDisc,
            "NEA=1 means no event descriptor — byte 5 is not a Media Status"
        );
        assert_eq!(d.drive_status(), DriveStatus::DiscPresent);

        // Notification Class 1 (Operational Change), not 4 (Media): a real
        // descriptor, but of a class whose byte 5 means something else.
        let mut other_class = media_event_reply(0x00);
        other_class[2] = 0x01;
        let mut d = drive_with(other_class);
        assert_ne!(
            d.drive_status(),
            DriveStatus::NoDisc,
            "a non-Media notification class carries no media status"
        );
        assert_eq!(d.drive_status(), DriveStatus::DiscPresent);

        // Control: the same 8 bytes WITH a valid media event header really do
        // decode Media Status 0 as NoDisc, so the two asserts above are about
        // the header and not about byte 5.
        let mut d = drive_with(media_event_reply(0x00));
        assert_eq!(d.drive_status(), DriveStatus::NoDisc);
    }

    // ── Mocks for Drive::read single-shot semantics + CDB encoding ──

    use std::sync::{Arc, Mutex};

    /// Records the CDB of every execute() and returns a programmable
    /// outcome. Lets a test assert both the bytes sent to the drive and
    /// how the driver translates the transport result.
    struct RecordingTransport {
        last_cdb: Arc<Mutex<Vec<u8>>>,
        last_timeout: Arc<Mutex<u32>>,
        outcome: TransportOutcome,
    }
    enum TransportOutcome {
        /// Report this many bytes transferred (data left as-is).
        Ok(usize),
        /// Fail with a ScsiError carrying this status + optional sense.
        Scsi(u8, Option<crate::scsi::ScsiSense>),
    }
    impl ScsiTransport for RecordingTransport {
        fn execute(
            &mut self,
            cdb: &[u8],
            _dir: DataDirection,
            _data: &mut [u8],
            timeout_ms: u32,
        ) -> Result<ScsiResult> {
            *self.last_cdb.lock().unwrap() = cdb.to_vec();
            *self.last_timeout.lock().unwrap() = timeout_ms;
            match self.outcome {
                TransportOutcome::Ok(n) => Ok(ScsiResult {
                    status: 0,
                    bytes_transferred: n,
                    sense: [0u8; 32],
                }),
                TransportOutcome::Scsi(status, sense) => Err(Error::ScsiError {
                    opcode: cdb[0],
                    status,
                    sense,
                }),
            }
        }
    }

    /// A drive under test plus the handles that observe it: captured CDB bytes
    /// and the timeout counter.
    struct RecordingHarness {
        drive: Drive,
        cdb: Arc<Mutex<Vec<u8>>>,
        timeouts: Arc<Mutex<u32>>,
    }

    fn recording(outcome: TransportOutcome) -> RecordingHarness {
        let cdb = Arc::new(Mutex::new(Vec::new()));
        let to = Arc::new(Mutex::new(0u32));
        let t = RecordingTransport {
            last_cdb: cdb.clone(),
            last_timeout: to.clone(),
            outcome,
        };
        RecordingHarness {
            drive: Drive::from_transport_for_test(Box::new(t)),
            cdb,
            timeouts: to,
        }
    }

    #[test]
    fn read_builds_read10_cdb_with_be_lba_and_count() {
        // READ(10) (0x28): LBA bytes 2..5 BE, length bytes 7..8 BE (MMC-6). FUA is
        // DISABLED (byte 1 == 0x00) — forcing FUA on the bulk sweep collapsed
        // throughput ~10x. Distinct nibbles catch a swapped shift.
        let RecordingHarness {
            drive: mut d,
            cdb,
            timeouts: _to,
        } = recording(TransportOutcome::Ok(4096));
        let mut buf = vec![0u8; 4096];
        let n = d.read(0x00AB_CDEF, 2, &mut buf, false).unwrap();
        assert_eq!(n, 4096, "returns transport bytes_transferred");
        let c = cdb.lock().unwrap();
        assert_eq!(c[0], crate::scsi::SCSI_READ_10);
        assert_eq!(
            c[1], 0x00,
            "FUA disabled — cache/readahead allowed on the bulk read path"
        );
        assert_eq!(&c[2..6], &[0x00, 0xAB, 0xCD, 0xEF], "LBA big-endian");
        assert_eq!(&c[7..9], &[0x00, 0x02], "transfer length big-endian");
    }

    #[test]
    fn read_fua_sets_the_force_unit_access_bit() {
        // The Pass-N FuaRetry lever: read_fua(.., fua=true) sets READ(10) byte-1
        // bit 0x08 so the drive re-fetches the medium past its cache; fua=false
        // leaves it clear (the bulk path).
        let RecordingHarness {
            drive: mut d,
            cdb,
            timeouts: _to,
        } = recording(TransportOutcome::Ok(2048));
        let mut buf = vec![0u8; 2048];
        d.read_fua(0, 1, &mut buf, false, true).unwrap();
        assert_eq!(
            cdb.lock().unwrap()[1],
            0x08,
            "FUA requested — byte-1 bit 0x08 set so the drive bypasses its cache"
        );
    }

    // Uses a NONZERO top byte for LBA/count so a `>>` mutated to `<<` is
    // observable (a zero top byte can't tell the two apart).
    #[test]
    fn read_cdb_shifts_are_not_masked_by_a_zero_top_byte() {
        let RecordingHarness {
            drive: mut d,
            cdb,
            timeouts: _to,
        } = recording(TransportOutcome::Ok(300 * 2048));
        let mut buf = vec![0u8; 300 * 2048];
        // count = 300 (0x012C): count >> 8 == 0x01, nonzero — a `<<`
        // mutation would instead yield 0x00.
        d.read(0xAABB_CCDD, 300, &mut buf, false).unwrap();
        let c = cdb.lock().unwrap();
        assert_eq!(
            &c[2..6],
            &[0xAA, 0xBB, 0xCC, 0xDD],
            "LBA bytes, including the >>24 top byte, must be big-endian verbatim"
        );
        assert_eq!(
            &c[7..9],
            &[0x01, 0x2C],
            "count bytes, including the >>8 top byte"
        );
    }

    #[test]
    fn read_recovery_flag_selects_60s_timeout() {
        // recovery=true must use READ_RECOVERY_TIMEOUT_MS (60 s); false
        // uses READ_TIMEOUT_MS (10 s). Doc: patch pass vs copy sweep.
        let RecordingHarness {
            drive: mut d,
            cdb: _cdb,
            timeouts: to,
        } = recording(TransportOutcome::Ok(2048));
        let mut buf = vec![0u8; 2048];
        d.read(0, 1, &mut buf, true).unwrap();
        assert_eq!(*to.lock().unwrap(), crate::scsi::READ_RECOVERY_TIMEOUT_MS);

        let RecordingHarness {
            drive: mut d2,
            cdb: _c2,
            timeouts: to2,
        } = recording(TransportOutcome::Ok(2048));
        d2.read(0, 1, &mut buf, false).unwrap();
        assert_eq!(*to2.lock().unwrap(), crate::scsi::READ_TIMEOUT_MS);
    }

    #[test]
    fn read_maps_scsi_error_to_discread_preserving_status_and_sense() {
        // On a non-Halted failure, Drive::read returns Error::DiscRead
        // with sector=lba and the transport's status+sense carried
        // through (extract_scsi_context). A 03/11/05 MEDIUM ERROR.
        let sense = crate::scsi::ScsiSense {
            sense_key: 3,
            asc: 0x11,
            ascq: 0x05,
        };
        let RecordingHarness {
            drive: mut d,
            cdb: _cdb,
            timeouts: _to,
        } = recording(TransportOutcome::Scsi(0x02, Some(sense)));
        let mut buf = vec![0u8; 2048];
        let err = d.read(0x1234, 1, &mut buf, false).unwrap_err();
        match err {
            Error::DiscRead {
                sector,
                status,
                sense: s,
            } => {
                assert_eq!(sector, 0x1234, "sector must be the requested LBA");
                assert_eq!(status, Some(0x02));
                assert_eq!(s, Some(sense), "sense triple preserved");
            }
            other => panic!("expected DiscRead, got {other:?}"),
        }
    }

    #[test]
    fn read_transport_failure_status_preserved_for_marginal_routing() {
        // Status 0xFF (TRANSPORT_FAILURE) with no sense must surface in
        // DiscRead.status so is_scsi_transport_failure() routes it.
        let RecordingHarness {
            drive: mut d,
            cdb: _cdb,
            timeouts: _to,
        } = recording(TransportOutcome::Scsi(
            crate::scsi::SCSI_STATUS_TRANSPORT_FAILURE,
            None,
        ));
        let mut buf = vec![0u8; 2048];
        let err = d.read(7, 1, &mut buf, false).unwrap_err();
        assert!(err.is_scsi_transport_failure());
        assert!(err.scsi_sense().is_none());
    }

    // extract_scsi_context must map the two dead-bus faults (IoError,
    // DeviceNotFound) to the 0xFF TRANSPORT_FAILURE sentinel, not 0x00 — a
    // wedged bus must abort the pass, not zero-fill it.
    #[test]
    fn extract_scsi_context_maps_dead_bus_faults_to_transport_failure() {
        let (status, sense) = extract_scsi_context(&Error::IoError {
            source: std::io::Error::from(std::io::ErrorKind::NotConnected),
        });
        assert_eq!(
            status,
            crate::scsi::SCSI_STATUS_TRANSPORT_FAILURE,
            "a failed ioctl(SG_IO) is a transport-layer fault"
        );
        assert!(sense.is_none(), "no SCSI reply means no sense data");

        let (status, sense) = extract_scsi_context(&Error::DeviceNotFound {
            path: "/dev/sg9".into(),
        });
        assert_eq!(
            status,
            crate::scsi::SCSI_STATUS_TRANSPORT_FAILURE,
            "a vanished device is a transport-layer fault"
        );
        assert!(sense.is_none());

        // Control: the catch-all still yields (0, None) for unrelated errors,
        // so the two asserts above are about these variants specifically.
        assert_eq!(extract_scsi_context(&Error::Halted), (0, None));

        // Control: real SCSI replies still pass their own status through.
        let s = crate::scsi::ScsiSense {
            sense_key: 3,
            asc: 0x11,
            ascq: 0x00,
        };
        assert_eq!(
            extract_scsi_context(&Error::ScsiError {
                opcode: 0x28,
                status: 0x02,
                sense: Some(s),
            }),
            (0x02, Some(s))
        );
    }

    // End-to-end: a transport IoError must still classify as a transport
    // failure after Drive::read flattens it into DiscRead.
    #[test]
    fn read_io_error_surfaces_as_transport_failure_not_a_bad_sector() {
        let mut d = Drive::from_transport_for_test(Box::new(AlwaysErr {
            err: || Error::IoError {
                source: std::io::Error::from(std::io::ErrorKind::NotConnected),
            },
        }));
        let mut buf = vec![0u8; 2048];
        let err = d.read(42, 1, &mut buf, false).unwrap_err();
        assert!(
            err.is_scsi_transport_failure(),
            "a wedged bus must abort the pass, not zero-fill: got {err:?}"
        );

        // The same for a device that vanished mid-read.
        let mut d = Drive::from_transport_for_test(Box::new(AlwaysErr {
            err: || Error::DeviceNotFound {
                path: "/dev/sg9".into(),
            },
        }));
        let err = d.read(42, 1, &mut buf, false).unwrap_err();
        assert!(
            err.is_scsi_transport_failure(),
            "a vanished device must abort the pass: got {err:?}"
        );
    }

    #[test]
    fn read_returns_halted_before_dispatch_without_touching_transport() {
        // When the halt flag is set, checked_exec returns Halted BEFORE
        // execute(); the error must be Halted (not DiscRead), so the
        // recovery loop distinguishes user-stop from a read failure.
        let RecordingHarness {
            drive: mut d,
            cdb,
            timeouts: _to,
        } = recording(TransportOutcome::Ok(2048));
        d.halt();
        let mut buf = vec![0u8; 2048];
        let err = d.read(0, 1, &mut buf, false).unwrap_err();
        assert!(matches!(err, Error::Halted));
        assert!(
            cdb.lock().unwrap().is_empty(),
            "transport execute must not run when pre-halted"
        );
    }

    #[test]
    fn clear_halt_reenables_reads() {
        // halt() then clear_halt() must allow reads again — the flag is
        // not sticky.
        let RecordingHarness {
            drive: mut d,
            cdb: _cdb,
            timeouts: _to,
        } = recording(TransportOutcome::Ok(2048));
        d.halt();
        d.clear_halt();
        let mut buf = vec![0u8; 2048];
        assert!(d.read(0, 1, &mut buf, false).is_ok());
    }

    #[test]
    fn read_does_not_truncate_reported_bytes() {
        // Single-shot contract: Drive::read returns exactly what the
        // transport reported, never a smaller count silently. Transport
        // says a full 32-sector batch (65536 bytes) succeeded.
        let RecordingHarness {
            drive: mut d,
            cdb: _cdb,
            timeouts: _to,
        } = recording(TransportOutcome::Ok(65536));
        let mut buf = vec![0u8; 65536];
        assert_eq!(d.read(0, 32, &mut buf, false).unwrap(), 65536);
    }

    // ── Drive::read chunking against a capped transport ─────────────

    // Transport with a small max_transfer_bytes that records each READ(10)'s
    // (lba, count), can fail the Nth read, for chunk-decomposition tests.
    struct ChunkingTransport {
        max_bytes: usize,
        /// Recorded (lba, transfer_length_sectors) per READ(10).
        reads: Arc<Mutex<Vec<(u32, u16)>>>,
        /// If Some(i), the i-th READ(10) (0-based) fails with a SCSI error.
        fail_on: Option<usize>,
        seen: usize,
    }
    impl ScsiTransport for ChunkingTransport {
        fn max_transfer_bytes(&self) -> usize {
            self.max_bytes
        }
        fn execute(
            &mut self,
            cdb: &[u8],
            _dir: DataDirection,
            data: &mut [u8],
            _timeout_ms: u32,
        ) -> Result<ScsiResult> {
            // Only track READ(10); ignore other CDBs (e.g. the 6-byte
            // PREVENT ALLOW MEDIUM REMOVAL the Drive sends on Drop).
            if cdb.first() != Some(&crate::scsi::SCSI_READ_10) || cdb.len() < 10 {
                return Ok(ScsiResult {
                    status: 0,
                    bytes_transferred: data.len(),
                    sense: [0u8; 32],
                });
            }
            let lba = u32::from_be_bytes([cdb[2], cdb[3], cdb[4], cdb[5]]);
            let count = u16::from_be_bytes([cdb[7], cdb[8]]);
            self.reads.lock().unwrap().push((lba, count));
            let idx = self.seen;
            self.seen += 1;
            if self.fail_on == Some(idx) {
                return Err(Error::ScsiError {
                    opcode: cdb[0],
                    status: 0x02,
                    sense: Some(crate::scsi::ScsiSense {
                        sense_key: 3,
                        asc: 0x11,
                        ascq: 0x05,
                    }),
                });
            }
            Ok(ScsiResult {
                status: 0,
                bytes_transferred: data.len(),
                sense: [0u8; 32],
            })
        }
    }

    /// A drive under test plus the handle recording each `(lba, count)` read.
    struct ChunkingHarness {
        drive: Drive,
        reads: Arc<Mutex<Vec<(u32, u16)>>>,
    }

    fn chunking(max_bytes: usize, fail_on: Option<usize>) -> ChunkingHarness {
        let reads = Arc::new(Mutex::new(Vec::new()));
        let t = ChunkingTransport {
            max_bytes,
            reads: reads.clone(),
            fail_on,
            seen: 0,
        };
        ChunkingHarness {
            drive: Drive::from_transport_for_test(Box::new(t)),
            reads,
        }
    }

    // An undersized caller buffer must error, not panic, whether the request
    // fits in one transfer or has to be chunked. See docs/drive-mod.md —
    // chunked-read tests.
    #[test]
    fn an_undersized_buffer_errors_on_the_chunked_path_just_like_the_single_one() {
        // max_transfer = 4 sectors, so a 10-sector read must chunk.
        let mut h = chunking(4 * 2048, None);
        let mut small = vec![0u8; 4096]; // 2 sectors' worth for a 10-sector read

        let chunked = h.drive.read(0, 10, &mut small, false);
        assert!(
            matches!(chunked, Err(Error::DiscRead { .. })),
            "an undersized buffer on the chunked path must be an error, not a panic"
        );

        // The single-chunk path, same undersized buffer, same verdict.
        let single = h.drive.read(0, 3, &mut small, false);
        assert!(
            matches!(single, Err(Error::DiscRead { .. })),
            "the single-chunk path must agree"
        );

        // Exactly-sized still works, so the guard is not simply rejecting
        // everything on the chunked path.
        let mut exact = vec![0u8; 10 * 2048];
        assert!(h.drive.read(0, 10, &mut exact, false).is_ok());
    }

    #[test]
    fn read_chunks_large_request_to_max_transfer() {
        // max_transfer = 4 sectors (4 * 2048 = 8192 bytes). A read of 10
        // sectors at LBA 0 must split into 3 READ(10) CDBs: (0,4), (4,4),
        // (8,2). The assembled buffer is the full 10*2048 bytes.
        let ChunkingHarness {
            drive: mut d,
            reads,
        } = chunking(4 * 2048, None);
        let mut buf = vec![0u8; 10 * 2048];
        let n = d.read(0, 10, &mut buf, false).unwrap();
        assert_eq!(n, 10 * 2048, "returns total bytes across all chunks");
        let r = reads.lock().unwrap();
        assert_eq!(
            *r,
            vec![(0, 4), (4, 4), (8, 2)],
            "must chunk into 4+4+2 sectors at advancing LBAs"
        );
    }

    #[test]
    fn read_chunk_failure_reports_failing_chunk_lba() {
        // Same 4-sector cap; fail the 2nd chunk (index 1), which covers
        // LBA 4. The error must be DiscRead with sector = 4 (the failing
        // chunk's LBA), NOT the request base LBA 0.
        let ChunkingHarness {
            drive: mut d,
            reads,
        } = chunking(4 * 2048, Some(1));
        let mut buf = vec![0u8; 10 * 2048];
        let err = d.read(0, 10, &mut buf, false).unwrap_err();
        match err {
            Error::DiscRead { sector, status, .. } => {
                assert_eq!(sector, 4, "failing chunk's LBA, not the request base");
                assert_eq!(status, Some(0x02));
            }
            other => panic!("expected DiscRead, got {other:?}"),
        }
        // Reads 0 (LBA 0) succeeded and 1 (LBA 4) failed; the loop stops on
        // the error so LBA 8 is never issued.
        let r = reads.lock().unwrap();
        assert_eq!(*r, vec![(0, 4), (4, 4)], "stops at the failing chunk");
    }

    #[test]
    fn read_small_request_is_single_unchunked_read() {
        // count <= max_sectors must take the single-read path unchanged: a
        // 3-sector read under a 4-sector cap is exactly one READ(10).
        let ChunkingHarness {
            drive: mut d,
            reads,
        } = chunking(4 * 2048, None);
        let mut buf = vec![0u8; 3 * 2048];
        assert_eq!(d.read(0, 3, &mut buf, false).unwrap(), 3 * 2048);
        assert_eq!(*reads.lock().unwrap(), vec![(0, 3)], "single CDB, no split");
    }

    /// Transport that fills whatever slice of `data` it's given with a
    /// marker byte derived from the CDB's LBA, so a test can verify BYTE
    /// POSITION, not just which (lba, count) pairs were issued.
    struct PlacementTransport;
    impl ScsiTransport for PlacementTransport {
        fn max_transfer_bytes(&self) -> usize {
            4 * 2048
        }
        fn execute(
            &mut self,
            cdb: &[u8],
            _dir: DataDirection,
            data: &mut [u8],
            _timeout_ms: u32,
        ) -> Result<ScsiResult> {
            if cdb.first() != Some(&crate::scsi::SCSI_READ_10) || cdb.len() < 10 {
                return Ok(ScsiResult {
                    status: 0,
                    bytes_transferred: data.len(),
                    sense: [0u8; 32],
                });
            }
            let lba = u32::from_be_bytes([cdb[2], cdb[3], cdb[4], cdb[5]]);
            data.fill((lba + 1) as u8);
            Ok(ScsiResult {
                status: 0,
                bytes_transferred: data.len(),
                sense: [0u8; 32],
            })
        }
    }

    // Writes a distinct marker per chunk and checks the BYTE offset, catching
    // a `*` -> `+`/`/` mutation in the chunk destination-slice arithmetic.
    // See docs/drive-mod.md — chunked-read tests.
    #[test]
    fn read_chunks_write_into_correctly_offset_buffer_regions() {
        // max_transfer = 4 sectors (8192 bytes): a 10-sector read at LBA 0
        // splits into (lba=0,4), (lba=4,4), (lba=8,2).
        let mut d = Drive::from_transport_for_test(Box::new(PlacementTransport));
        let mut buf = vec![0u8; 10 * 2048];
        d.read(0, 10, &mut buf, false).unwrap();
        assert!(
            buf[0..8192].iter().all(|&b| b == 1),
            "chunk at LBA 0 (marker 1) must fill bytes [0, 8192)"
        );
        assert!(
            buf[8192..16384].iter().all(|&b| b == 5),
            "chunk at LBA 4 (marker 5) must fill bytes [8192, 16384), not overlap the first chunk"
        );
        assert!(
            buf[16384..20480].iter().all(|&b| b == 9),
            "chunk at LBA 8 (marker 9) must fill bytes [16384, 20480)"
        );
    }

    // Multi-chunk path with an undersized buffer must error, not panic, same
    // as the single-chunk path. See docs/drive-mod.md — chunked-read tests.
    #[test]
    fn undersized_buffer_multi_chunk_errors_not_panics() {
        let ChunkingHarness {
            drive: mut d,
            reads: _reads,
        } = chunking(4 * 2048, None);
        // count (10) > max_sectors (4) → the chunk loop; buf holds only 1 sector.
        let mut buf = vec![0u8; 2048];
        assert!(
            matches!(d.read(0, 10, &mut buf, false), Err(Error::DiscRead { .. })),
            "an undersized buffer must error, not panic"
        );
        // The single-chunk path with the SAME undersized buffer already errored;
        // the two paths must now agree.
        let mut buf = vec![0u8; 2048];
        assert!(
            matches!(d.read(0, 3, &mut buf, false), Err(Error::DiscRead { .. })),
            "single-chunk path errors on an undersized buffer (unchanged)"
        );
    }

    // The chunk loop's `lba + done` is checked: a request crossing u32::MAX
    // must error, not debug-panic or release-wrap to a low LBA.
    #[test]
    fn chunk_lba_near_u32_max_errors_not_overflows() {
        let ChunkingHarness {
            drive: mut d,
            reads: _reads,
        } = chunking(4 * 2048, None);
        let mut buf = vec![0u8; 10 * 2048];
        // 0xFFFF_FFFE + 4 overflows on the second chunk.
        assert!(
            matches!(
                d.read(0xFFFF_FFFE, 10, &mut buf, false),
                Err(Error::DiscRead { .. })
            ),
            "an LBA range past u32::MAX must error, not overflow"
        );
    }

    // ── find_drive media-preference selection policy ────────────────

    // Fake drive whose GET EVENT STATUS reply reports the given media_status
    // byte (0x02 = DiscPresent, 0x00 = NoDisc), for hardware-free tests.
    fn drive_with_media_byte(media_status: u8) -> Drive {
        drive_with(media_event_reply(media_status))
    }

    #[test]
    fn select_drive_prefers_drive_with_media() {
        // Drive #1 has no disc (0x00), drive #2 has a disc (0x02). The
        // selection must skip the empty first drive and pick the one with
        // media — the Windows multi-drive bug fix.
        let drives = vec![drive_with_media_byte(0x00), drive_with_media_byte(0x02)];
        let picked = select_drive_with_media(drives.into_iter()).expect("a drive");
        let mut picked = picked;
        assert_eq!(
            picked.drive_status(),
            DriveStatus::DiscPresent,
            "must pick the drive reporting DiscPresent, not the empty first drive"
        );
    }

    #[test]
    fn select_drive_falls_back_to_first_when_none_have_media() {
        // No drive reports a disc → fall back to the FIRST opened drive so single-drive
        // / quirky setups still get one (historical behavior). Tag drive #1 distinctly
        // (TrayOpen 0x01) and confirm it, not #2 (NoDisc 0x00), is returned.
        let drives = vec![drive_with_media_byte(0x01), drive_with_media_byte(0x00)];
        let mut picked = select_drive_with_media(drives.into_iter()).expect("a fallback drive");
        assert_eq!(
            picked.drive_status(),
            DriveStatus::TrayOpen,
            "fallback must be the first drive yielded"
        );
    }

    #[test]
    fn select_drive_none_when_no_drives() {
        // No candidates at all → None.
        let empty: Vec<Drive> = Vec::new();
        assert!(select_drive_with_media(empty.into_iter()).is_none());
    }

    // ── drive_status branch coverage (GET EVENT STATUS byte 5) ──────

    #[test]
    fn drive_status_no_disc_maps_correctly() {
        // media_status low bits 0b00 = tray closed, no disc.
        let mut d = drive_with(media_event_reply(0x00));
        assert_eq!(d.drive_status(), DriveStatus::NoDisc);
    }

    #[test]
    fn drive_status_tray_open_maps_correctly() {
        // media_status low bits 0b01 = tray open, no media.
        let mut d = drive_with(media_event_reply(0x01));
        assert_eq!(d.drive_status(), DriveStatus::TrayOpen);
    }

    #[test]
    fn drive_status_high_bits_in_media_status_ignored() {
        // MMC-6 §6.7: only the low 2 bits of the Media Event Descriptor's
        // Media Status are the door/media state; the reserved upper bits must
        // be masked. 0xFE has low bits 0b10 = DiscPresent.
        let mut d = drive_with(media_event_reply(0xFE));
        assert_eq!(d.drive_status(), DriveStatus::DiscPresent);
    }

    // A 5-byte transfer (byte 5 undelivered) must fall back to TUR, not
    // decode a zero-initialised byte 5 as a real Media Status of NoDisc.
    #[test]
    fn drive_status_rejects_media_status_from_an_undelivered_byte() {
        let short = vec![0x00, 0x06, 0x04, 0x00, 0x00]; // 5 bytes: descriptor_len=6, NEA=0, class=Media
        let mut d = drive_with(short);
        assert_eq!(
            d.drive_status(),
            DriveStatus::DiscPresent,
            "a transfer too short to include byte 5 must fall back to TUR, \
             not decode a media status the drive never sent"
        );
    }

    #[test]
    fn drive_status_short_transfer_falls_back_to_tur() {
        // bytes_transferred < 6 (buffer len 8, payload 4) means the GET EVENT reply
        // is unusable, so code falls back to a TUR; FixedTransport always returns
        // Ok, so the TUR "succeeds" → DiscPresent.
        let mut d = drive_with(vec![0u8; 4]);
        assert_eq!(d.drive_status(), DriveStatus::DiscPresent);
    }

    /// Transport that fails every command with a programmable error —
    /// drives the TUR-fallback NotReady/Unknown branches of drive_status.
    struct AlwaysErr {
        err: fn() -> Error,
    }
    impl ScsiTransport for AlwaysErr {
        fn execute(
            &mut self,
            _cdb: &[u8],
            _dir: DataDirection,
            _data: &mut [u8],
            _timeout_ms: u32,
        ) -> Result<ScsiResult> {
            Err((self.err)())
        }
    }

    #[test]
    fn drive_status_tur_not_ready_sense_maps_not_ready() {
        // GET EVENT fails, fallback TUR fails with NOT READY sense →
        // DriveStatus::NotReady (drive spinning up). Doc: drive_status
        // fallback branch.
        let mut d = Drive::from_transport_for_test(Box::new(AlwaysErr {
            err: || Error::ScsiError {
                opcode: 0,
                status: 0x02,
                sense: Some(crate::scsi::ScsiSense {
                    sense_key: 2, // NOT READY
                    asc: 0x04,
                    ascq: 0x01,
                }),
            },
        }));
        assert_eq!(d.drive_status(), DriveStatus::NotReady);
    }

    #[test]
    fn drive_status_tur_unit_attention_maps_not_ready() {
        // UNIT ATTENTION (media changed) on the fallback TUR also maps to
        // NotReady per the is_unit_attention() arm.
        let mut d = Drive::from_transport_for_test(Box::new(AlwaysErr {
            err: || Error::ScsiError {
                opcode: 0,
                status: 0x02,
                sense: Some(crate::scsi::ScsiSense {
                    sense_key: 6, // UNIT ATTENTION
                    asc: 0x28,
                    ascq: 0x00,
                }),
            },
        }));
        assert_eq!(d.drive_status(), DriveStatus::NotReady);
    }

    #[test]
    fn drive_status_tur_other_error_maps_unknown() {
        // A fallback TUR failure that is neither NOT READY nor UNIT
        // ATTENTION (e.g. transport failure, no sense) → Unknown.
        let mut d = Drive::from_transport_for_test(Box::new(AlwaysErr {
            err: || Error::ScsiError {
                opcode: 0,
                status: crate::scsi::SCSI_STATUS_TRANSPORT_FAILURE,
                sense: None,
            },
        }));
        assert_eq!(d.drive_status(), DriveStatus::Unknown);
    }

    // ── get_config_feature: header-strip threshold + clamp ──────────

    #[test]
    fn get_config_feature_strips_8_byte_header() {
        // GET CONFIGURATION reply has an 8-byte Feature Header (MMC-6
        // §5.2.2). get_config_feature returns buf[8..end]. Provide a
        // 12-byte reply → returns the 4 payload bytes.
        let mut payload = vec![0u8; 8];
        payload.extend_from_slice(&[0xDE, 0xAD, 0xBE, 0xEF]);
        let mut d = drive_with(payload);
        assert_eq!(
            d.get_config_feature(0x010D),
            Some(vec![0xDE, 0xAD, 0xBE, 0xEF])
        );
    }

    #[test]
    fn get_config_feature_at_exactly_8_bytes_returns_none() {
        // end == 8 means header only, no descriptor → None (the `end > 8`
        // guard). Boundary against an off-by-one that would return an
        // empty Vec instead of None.
        let mut d = drive_with(vec![0u8; 8]);
        assert_eq!(d.get_config_feature(0x0000), None);
    }

    #[test]
    fn get_config_feature_encodes_feature_code_be_in_cdb() {
        // GET CONFIGURATION (0x46), RT byte 1 = 0x02, feature code big-endian in
        // bytes 2..4. 0x010D has a nonzero high byte, so a swapped shift (>> vs <<)
        // or byte order bug would ask the drive for the wrong feature.
        let RecordingHarness {
            drive: mut d,
            cdb,
            timeouts: _to,
        } = recording(TransportOutcome::Ok(0));
        let _ = d.get_config_feature(0x010D);
        let c = cdb.lock().unwrap();
        assert_eq!(
            &c[..4],
            &[crate::scsi::SCSI_GET_CONFIGURATION, 0x02, 0x01, 0x0D],
            "feature code must be big-endian in CDB bytes 2..4"
        );
    }

    // ── spin_cycle / wait_ready: recovery entry points (LOW finding 8) ──────

    /// Records EVERY CDB issued, in order — unlike `RecordingTransport`
    /// (used above), which only keeps the last one. Needed to assert a
    /// multi-command sequence like `spin_cycle`'s STOP-then-START.
    struct SequenceTransport {
        cdbs: Arc<Mutex<Vec<Vec<u8>>>>,
        ok: bool,
    }
    impl ScsiTransport for SequenceTransport {
        fn execute(
            &mut self,
            cdb: &[u8],
            _dir: DataDirection,
            _data: &mut [u8],
            _timeout_ms: u32,
        ) -> Result<ScsiResult> {
            self.cdbs.lock().unwrap().push(cdb.to_vec());
            if self.ok {
                Ok(ScsiResult {
                    status: 0,
                    bytes_transferred: 0,
                    sense: [0u8; 32],
                })
            } else {
                Err(Error::ScsiError {
                    opcode: cdb[0],
                    status: 2,
                    sense: None,
                })
            }
        }
    }

    // BU40N/Initio wedge recovery: exactly STOP (START=0) then START
    // (START=1), both LOEJ=0 — a slot-loading drive must never eject.
    #[test]
    fn spin_cycle_issues_stop_then_start_without_ejecting() {
        let cdbs = Arc::new(Mutex::new(Vec::new()));
        let t = SequenceTransport {
            cdbs: cdbs.clone(),
            ok: true,
        };
        let mut d = Drive::from_transport_for_test(Box::new(t));
        d.spin_cycle()
            .expect("spin_cycle must succeed when both SCSI commands succeed");
        let seq = cdbs.lock().unwrap();
        assert_eq!(
            seq.len(),
            2,
            "spin_cycle must issue exactly two commands: {seq:?}"
        );
        assert_eq!(seq[0][0], SCSI_START_STOP_UNIT);
        assert_eq!(seq[0][4], 0x00, "first command: START=0 (spin down)");
        assert_eq!(seq[1][0], SCSI_START_STOP_UNIT);
        assert_eq!(seq[1][4], 0x01, "second command: START=1 (spin up)");
        for (i, c) in seq.iter().enumerate() {
            assert_eq!(
                c[4] & 0x02,
                0,
                "LOEJ bit must be clear on command {i} — spin_cycle must never eject"
            );
        }
    }

    // A drive that never answers TUR successfully must surface
    // Err(DeviceNotReady), not silently report ready.
    #[test]
    fn wait_ready_returns_err_when_drive_never_becomes_ready() {
        struct NeverReady;
        impl ScsiTransport for NeverReady {
            fn execute(
                &mut self,
                cdb: &[u8],
                _dir: DataDirection,
                _data: &mut [u8],
                _timeout_ms: u32,
            ) -> Result<ScsiResult> {
                Err(Error::ScsiError {
                    opcode: cdb[0],
                    status: 2,
                    sense: None,
                })
            }
        }
        let mut d = Drive::from_transport_for_test(Box::new(NeverReady));
        let r = d.wait_ready();
        assert!(
            matches!(r, Err(Error::DeviceNotReady { .. })),
            "a drive that never answers TUR successfully must be DeviceNotReady, got {r:?}"
        );
    }

    // A dead bus (transport failure) will never spin up, so wait_ready must
    // surface it AT ONCE rather than poll a phantom for the full ~30 s.
    #[test]
    fn wait_ready_breaks_immediately_on_a_dead_bus() {
        struct DeadBus;
        impl ScsiTransport for DeadBus {
            fn execute(
                &mut self,
                cdb: &[u8],
                _dir: DataDirection,
                _data: &mut [u8],
                _timeout_ms: u32,
            ) -> Result<ScsiResult> {
                Err(Error::ScsiError {
                    opcode: cdb[0],
                    status: crate::scsi::SCSI_STATUS_TRANSPORT_FAILURE,
                    sense: None,
                })
            }
        }
        let mut d = Drive::from_transport_for_test(Box::new(DeadBus));
        let t0 = std::time::Instant::now();
        let r = d.wait_ready();
        assert!(
            matches!(&r, Err(e) if e.is_scsi_transport_failure()),
            "a dead bus must surface the transport failure, not DeviceNotReady: {r:?}"
        );
        assert!(
            t0.elapsed() < std::time::Duration::from_secs(5),
            "a dead bus must break out at once, not run the ~30 s poll"
        );
    }

    // A Stop pressed before the poll starts must be answered at once, not
    // after the ~30 s poll. See docs/drive-mod.md — wait_ready/spin_cycle halt tests.
    #[test]
    fn wait_ready_returns_halted_when_stopped_before_the_poll() {
        struct NeverReady;
        impl ScsiTransport for NeverReady {
            fn execute(
                &mut self,
                cdb: &[u8],
                _dir: DataDirection,
                _data: &mut [u8],
                _timeout_ms: u32,
            ) -> Result<ScsiResult> {
                Err(Error::ScsiError {
                    opcode: cdb[0],
                    status: 2,
                    sense: None,
                })
            }
        }
        let mut d = Drive::from_transport_for_test(Box::new(NeverReady));
        d.halt();
        let t0 = std::time::Instant::now();
        let r = d.wait_ready();
        assert!(
            matches!(r, Err(Error::Halted)),
            "a Stop is the operator, not a drive that failed to spin up: {r:?}"
        );
        assert!(
            t0.elapsed() < std::time::Duration::from_secs(5),
            "the poll must abandon immediately, not run its ~30 s course"
        );
    }

    // A Stop pressed part way through the poll must be answered at the next
    // command boundary. See docs/drive-mod.md — wait_ready/spin_cycle halt tests.
    #[test]
    fn wait_ready_returns_halted_when_stopped_during_the_poll() {
        struct StopsOnThirdPoll {
            halt: Arc<AtomicBool>,
            seen: usize,
        }
        impl ScsiTransport for StopsOnThirdPoll {
            fn execute(
                &mut self,
                cdb: &[u8],
                _dir: DataDirection,
                _data: &mut [u8],
                _timeout_ms: u32,
            ) -> Result<ScsiResult> {
                self.seen += 1;
                if self.seen == 3 {
                    self.halt.store(true, Ordering::Relaxed);
                }
                Err(Error::ScsiError {
                    opcode: cdb[0],
                    status: 2,
                    sense: None,
                })
            }
        }
        let mut d = Drive::from_transport_for_test(Box::new(StopsOnThirdPoll {
            halt: Arc::new(AtomicBool::new(false)),
            seen: 0,
        }));
        // Hand the transport the drive's OWN flag, so setting it is exactly
        // what an operator's Stop does.
        let flag = d.halt_flag();
        d.scsi = Box::new(StopsOnThirdPoll {
            halt: flag,
            seen: 0,
        });
        let t0 = std::time::Instant::now();
        let r = d.wait_ready();
        assert!(
            matches!(r, Err(Error::Halted)),
            "a mid-poll Stop must surface as Halted, not as DeviceNotReady \
             after the full 30 s: {r:?}"
        );
        assert!(
            t0.elapsed() < std::time::Duration::from_secs(5),
            "must exit on the third poll, not the sixtieth"
        );
    }

    // spin_cycle must not be deaf to Stop for its ~15 s of deliberate
    // waiting. See docs/drive-mod.md — wait_ready/spin_cycle halt tests.
    #[test]
    fn spin_cycle_returns_halted_when_stopped_before_it_starts() {
        let RecordingHarness {
            drive: mut d,
            cdb,
            timeouts: _to,
        } = recording(TransportOutcome::Ok(0));
        d.halt();
        let t0 = std::time::Instant::now();
        let r = d.spin_cycle();
        assert!(
            matches!(r, Err(Error::Halted)),
            "a Stop must abort the spin cycle: {r:?}"
        );
        assert!(
            t0.elapsed() < std::time::Duration::from_secs(2),
            "no sleep may run after the flag is set"
        );
        assert!(
            cdb.lock().unwrap().is_empty(),
            "not one START STOP UNIT may be issued after Stop"
        );
    }

    // A Stop that lands DURING the spin-down pause must wake it (halt-aware
    // sleep, ~100 ms). See docs/drive-mod.md — wait_ready/spin_cycle halt tests.
    #[test]
    fn spin_cycle_wakes_from_its_spin_down_pause_when_stopped() {
        let RecordingHarness {
            drive: mut d,
            cdb: _cdb,
            timeouts: _to,
        } = recording(TransportOutcome::Ok(0));
        let flag = d.halt_flag();
        let stopper = std::thread::spawn(move || {
            std::thread::sleep(std::time::Duration::from_millis(200));
            flag.store(true, Ordering::Relaxed);
        });
        let t0 = std::time::Instant::now();
        let r = d.spin_cycle();
        stopper.join().expect("stopper thread");
        assert!(
            matches!(r, Err(Error::Halted)),
            "a Stop during the spin-down pause must surface as Halted: {r:?}"
        );
        assert!(
            t0.elapsed() < std::time::Duration::from_secs(2),
            "the pause must be halt-aware, not a blind {SPIN_DOWN_IDLE_SECS}s \
             thread::sleep; took {:?}",
            t0.elapsed()
        );
    }

    // A READ(10) with GOOD status but a residual underrun must be refused
    // AND logged. See docs/drive-mod.md — read_logs_a_good_status_short_transfer.
    #[test]
    fn read_logs_a_good_status_short_transfer() {
        let RecordingHarness {
            drive: mut d,
            cdb: _cdb,
            timeouts: _to,
        } = recording(TransportOutcome::Ok(1024)); // half of one sector
        let mut buf = vec![0u8; 2048];
        let (r, events) = crate::testlog::capture(|| d.read(7, 1, &mut buf, false));
        assert!(
            matches!(r, Err(Error::DiscRead { sector: 7, .. })),
            "a short transfer stays a failed read: {r:?}"
        );
        let line = events
            .iter()
            .find(|e| e.target == "freemkv::drive" && e.field("transferred").is_some())
            .unwrap_or_else(|| {
                panic!("a silently refused short transfer is the defect; got {events:?}")
            });
        assert_eq!(line.level, tracing::Level::WARN);
        assert_eq!(line.field("lba"), Some("7"));
        assert_eq!(line.field("transferred"), Some("1024"));
        assert_eq!(
            line.field("expected"),
            Some("2048"),
            "the underrun is only legible as transferred-vs-expected"
        );
        assert_eq!(
            line.field("code"),
            Some(crate::error::E_DISC_READ.to_string().as_str())
        );
    }

    // ── report_key / mode_sense / read_buffer empty-vs-some ─────────

    #[test]
    fn report_key_rpc_state_returns_transferred_prefix() {
        // Returns buf[..end] where end = bytes_transferred. An 8-byte
        // reply yields all 8 bytes.
        let mut d = drive_with(vec![1, 2, 3, 4, 5, 6, 7, 8]);
        assert_eq!(d.report_key_rpc_state(), Some(vec![1, 2, 3, 4, 5, 6, 7, 8]));
    }

    #[test]
    fn report_key_rpc_state_zero_transfer_returns_none() {
        // end == 0 → None (the `end > 0` guard), never Some(empty).
        let mut d = drive_with(vec![]);
        assert_eq!(d.report_key_rpc_state(), None);
    }

    #[test]
    fn mode_sense_zero_transfer_returns_none() {
        let mut d = drive_with(vec![]);
        assert_eq!(d.mode_sense_page(0x2A), None);
    }

    #[test]
    fn mode_sense_page_positive_transfer_returns_prefix() {
        // Guard is `end > 0`; without a positive-transfer case the guard
        // could be flipped to `end < 0` (always false for a usize) and
        // every call would silently return None.
        let mut d = drive_with(vec![0xAA, 0xBB, 0xCC]);
        assert_eq!(d.mode_sense_page(0x01), Some(vec![0xAA, 0xBB, 0xCC]));
    }

    #[test]
    fn read_buffer_returns_prefix_and_clamps() {
        // read_buffer allocates `length` bytes; FixedTransport returns
        // min(payload, length). Request 16 with a 4-byte payload → 4 bytes.
        let mut d = drive_with(vec![9, 9, 9, 9]);
        assert_eq!(d.read_buffer(0x02, 0xF1, 16), Some(vec![9, 9, 9, 9]));
    }

    #[test]
    fn read_buffer_zero_transfer_returns_none() {
        let mut d = drive_with(vec![]);
        assert_eq!(d.read_buffer(0x02, 0xF1, 16), None);
    }

    // ── No-unlocker paths: init/probe succeed (OEM fallback) ────────

    #[test]
    fn init_without_unlocker_is_ok_oem_fallback() {
        // No registered unlocker matches, so route_unlock returns None. init() must
        // still succeed (stock mode for the host-cert handshake) — no-match is the
        // OEM fallback, not a failure.
        let mut d = drive_with(vec![]);
        assert!(
            d.init().is_ok(),
            "no-match init must succeed (OEM fallback)"
        );
        assert!(
            !d.is_ready(),
            "no unlocker ran → not in unlocked-ready state"
        );
    }

    #[test]
    fn probe_disc_without_unlocker_is_ok_noop() {
        // Disc-speed calibration moved into the unlocker (run at init).
        // With no unlocker, probe_disc is a successful no-op.
        let mut d = drive_with(vec![]);
        assert!(d.probe_disc().is_ok());
    }

    // ── Tray/speed control CDBs (thin wrappers; verify they actually send) ──

    #[test]
    fn set_speed_sends_set_cd_speed_cdb_with_be_speed() {
        let RecordingHarness {
            drive: mut d,
            cdb,
            timeouts: _to,
        } = recording(TransportOutcome::Ok(0));
        d.set_speed(0x1234);
        let c = cdb.lock().unwrap();
        assert_eq!(c[0], crate::scsi::SCSI_SET_CD_SPEED);
        assert_eq!(&c[2..4], &[0x12, 0x34], "read speed big-endian");
    }

    #[test]
    fn lock_tray_sends_prevent_with_removal_bit_set() {
        let RecordingHarness {
            drive: mut d,
            cdb,
            timeouts: _to,
        } = recording(TransportOutcome::Ok(0));
        d.lock_tray();
        let c = cdb.lock().unwrap();
        assert_eq!(c[0], SCSI_PREVENT_ALLOW_MEDIUM_REMOVAL);
        assert_eq!(c[4], 0x01, "PREVENT bit set (locked)");
    }

    #[test]
    fn unlock_tray_sends_prevent_with_removal_bit_clear() {
        let RecordingHarness {
            drive: mut d,
            cdb,
            timeouts: _to,
        } = recording(TransportOutcome::Ok(0));
        d.unlock_tray();
        let c = cdb.lock().unwrap();
        assert_eq!(c[0], SCSI_PREVENT_ALLOW_MEDIUM_REMOVAL);
        assert_eq!(c[4], 0x00, "PREVENT bit clear (unlocked)");
    }

    // SET CD SPEED and PREVENT/ALLOW MEDIUM REMOVAL are best-effort tray/speed
    // control: a drive that REJECTS them must be warned about, never fail the
    // rip. Each returns () on a transport error and still issues its CDB.
    #[test]
    fn set_speed_and_tray_control_swallow_a_drive_rejection() {
        let RecordingHarness {
            drive: mut d,
            cdb,
            timeouts: _to,
        } = recording(TransportOutcome::Scsi(0x02, None));
        // None of these may panic or propagate the ScsiError.
        d.set_speed(0x1234);
        assert_eq!(
            cdb.lock().unwrap()[0],
            crate::scsi::SCSI_SET_CD_SPEED,
            "SET CD SPEED still issued despite the rejection"
        );
        d.lock_tray();
        assert_eq!(cdb.lock().unwrap()[0], SCSI_PREVENT_ALLOW_MEDIUM_REMOVAL);
        assert_eq!(cdb.lock().unwrap()[4], 0x01, "PREVENT bit still set");
        d.unlock_tray();
        assert_eq!(cdb.lock().unwrap()[0], SCSI_PREVENT_ALLOW_MEDIUM_REMOVAL);
        assert_eq!(cdb.lock().unwrap()[4], 0x00, "ALLOW bit still clear");
    }

    #[test]
    fn eject_unlocks_then_sends_start_stop_with_loej() {
        let RecordingHarness {
            drive: mut d,
            cdb,
            timeouts: _to,
        } = recording(TransportOutcome::Ok(0));
        d.eject().unwrap();
        // The mock only records the LAST cdb; eject's own START STOP UNIT
        // (with LOEJ=1, byte 4 == 0x02) must be what's left recorded, not
        // the PREVENT/ALLOW from unlock_tray it calls first.
        let c = cdb.lock().unwrap();
        assert_eq!(c[0], SCSI_START_STOP_UNIT);
        assert_eq!(c[4], 0x02, "START=0, LOEJ=1 -> eject");
    }

    /// `SectorSource for Drive` must actually forward to `Drive`'s own
    /// methods, not silently become a no-op / stub return.
    #[test]
    fn sector_source_impl_forwards_to_drive_methods() {
        let RecordingHarness {
            drive: mut d,
            cdb,
            timeouts: _to,
        } = recording(TransportOutcome::Ok(2048));
        let mut buf = vec![0u8; 2048];
        let n = SectorSource::read_sectors(&mut d, 0, 1, &mut buf, false).unwrap();
        assert_eq!(n, 2048, "read_sectors must forward to Drive::read");
        assert_eq!(cdb.lock().unwrap()[0], crate::scsi::SCSI_READ_10);

        let n2 = SectorSource::read_sectors_fua(&mut d, 0, 1, &mut buf, false, true).unwrap();
        assert_eq!(n2, 2048, "read_sectors_fua must forward to Drive::read_fua");
        assert_eq!(
            cdb.lock().unwrap()[1],
            0x08,
            "fua=true must reach the CDB via the trait method"
        );

        SectorSource::set_speed(&mut d, 0xFFFF);
        assert_eq!(
            cdb.lock().unwrap()[0],
            crate::scsi::SCSI_SET_CD_SPEED,
            "SectorSource::set_speed must forward to Drive::set_speed"
        );
    }

    // ── decode_read_capacity additional boundaries ──────────────────

    #[test]
    fn read_capacity_exactly_4_bytes_decodes() {
        // bytes_transferred == 4 is the minimum that decodes (the guard
        // is `< 4`). last_lba in bytes 0..4 big-endian.
        let buf = [0x00, 0x00, 0x00, 0x05, 0, 0, 0, 0];
        assert_eq!(decode_read_capacity(&buf, 4).unwrap(), 6);
    }

    #[test]
    fn read_capacity_zero_last_lba_is_one_sector() {
        // last_lba 0 → capacity 1 (a single-sector medium), distinct from
        // the malformed/short-transfer rejection.
        let buf = [0, 0, 0, 0, 0, 0, 0, 0];
        assert_eq!(decode_read_capacity(&buf, 8).unwrap(), 1);
    }
}