yes now means the unlocker actually ran and did its job: LibreDrive from
the runtime firmware-unlock success, AACS host-cert only when LibreDrive
didn't do the bus (stock-drive fallback), CSS from the crack succeeding.
On a LibreDrive UHD that correctly reads LibreDrive: yes, AACS: no (LD
removed the bus, the cert route never ran) instead of the misleading
AACS: yes. Names stay registry-driven; runtime logic lives here.
Forcing FUA (Force Unit Access) on EVERY READ(10) bypassed the drive's
readahead/streaming cache on the bulk Pass-1 sweep, collapsing sequential
throughput ~10x (UHD 15-25 → ~2 MB/s, DVD → ~0.5 MB/s), disc-type-
agnostic — the cache IS the streaming throughput. This was the real speed
regression (not unlock/riplock, which the earlier chase suspected). Clear
byte-1 bit 0x08. FUA will return as a dedicated Pass-N recovery handler
that sets/clears it per marginal-sector re-read, where cache-masking of a
stochastic sector actually matters — never blanket on the bulk path (#55).
Returns each registered unlocker's name + whether it applies to this
drive+disc (via the unlock bridge over all_unlockers()). Disc crypto kind
derived in the library so the CLI and autorip render an identical, always-
current report with no hardcoded names. Also adds a Drive::unlocker_name()
runtime getter.
The v1.0.0-rc.1 unlocker refactor added an `if disc_is_dvd() { return }`
early-return in Drive::init() that skipped the whole drive-prep unlock for
DVDs. That firmware unlock is what lifts riplock and readies max read
speed — a DRIVE-level, disc-independent feature — so skipping it left
every DVD stuck at stock/riplock speed (~0.4x, 3h ETA). UHD was unaffected
because it flows through the unlock.
Remove the skip: init() now runs the identity-keyed drive unlocker for all
discs (disc kind is Unknown at init, so only the drive unlocker matches;
the AACS host-cert handshake and CSS bus-auth still run later, gated on the
real disc kind, on top of the unlocked drive). Speed stays where it
belongs — SET CD SPEED(0xFFFF) at pass-1 start (disc/mod.rs) — not in the
unlocker. Also drop the matching probe_disc DVD skip.
Reverts the SET STREAMING stopgap (separate freemkv-unlock revert): that
treated the symptom; the real bug was the skipped unlock. Drive features
come from the firmware unlock, not a stock speed CDB.
Handlers (section_recover.rs):
- Bisect expand loops now honor ctx.halted() (were deadline-only, so a
Stop could hang up to 60s vacuuming a readable island).
- read_span: explicit Transport arm so a bus-abort read isn't counted as
unproductive grinding; debug_assert the sector-aligned span invariant.
- Scoreboard rank: an attempted-but-zero-time handler (e.g. returned Halted
on its first check) now ranks BOTTOM, not top — it no longer crowds out
proven performers.
- Document the wedge tier-size coupling + new regression test that a
2-handler (tier-1) chain still catches a wedge via cross-section streak.
Pass-N engine (patch.rs):
- Rebuild PatchOutcome stats AFTER the post-read re-verify downgrade flush
(was snapshotting before it, over-reporting bytes_good / recovered and
risking a 'perfect rip' verdict on an imperfect one).
- Progress 'recovered' composes the still-bad set to MATCH work_total
(subtract NonTried, add Unreadable) so the bar can't pin at 0 on a
partially-swept disc or run backward on the Unreadable→NonTrimmed relabel.
- Remove dead work_done field; rewrite the stale 'adaptive batching' comment
to describe the handler chain and mark block_sectors/full_recovery as
informational-only.
Sweep (disc/mod.rs):
- Saturating arithmetic at the damage-jump position math (honor the
read_error side's documented defence-in-depth guarantee).
Deferred (noted, need focused passes): fast_capture re-introduction,
Pass-1 halt-misclassified-as-jump, bytes_good display inflation, the
always-zero blocks_* telemetry, Pass-1 jump-on-first-error policy.
DVD ran the drive at ~0.4x stock speed: init() early-returned for DVD
before any speed was set, and its only speed command was the sweep's lone
legacy SET CD SPEED, which this BU40N ignores for DVD. BD/UHD got up to
speed only via the firmware unlocker's calibration — a path a DVD can't
take (it breaks stock CSS).
Call the new unlock-crate drive-features capability at init() for ALL disc
kinds, before the DVD stock-mode early-return, via a bridge shim. Stock
MMC only (SET STREAMING + SET CD SPEED), no bus unlock, so CSS is
undisturbed.
The 2026-07-01 overnight rip ground a wedged BU40N for 28 minutes at
0 B/s. Root cause: the handler chain's read_span split errors only into
Transport (bus gone) vs Bad (everything else), so the drive's fast-fail
wedge sense (ILLEGAL REQUEST 0x05/0x24 — it rejects every CDB in <100ms
without attempting recovery) was treated as an ordinary bad sector. The
chain hopped to the next section forever, and the existing wedge detector
in read_error.rs never saw it because the chain reads through
recovery_read directly.
Add a pass-level wedge streak: read_span counts consecutive wedge-family
(Hardware/IllegalRequest) senses; at WEDGE_ABORT_STREAK (16) it escalates
the read to Transport, which every handler already propagates as
TransportFault — aborting the whole pass and setting wedged_exit so the
caller spin-cycles. The streak is carried across sections via PatchCtx
(seeded into and read back from each per-section HandlerCtx) so a wedge is
caught even when every bad sub-range is smaller than the streak. Any Good
or non-wedge (medium-error) read resets it, so scattered bad sectors on
real media never trip it. New fixture test: a wholly-wedged 1000-sector
section aborts in <100 reads, not 1000.
The expand loops broke out of the batch sweep on the first failing read,
overshooting the good/dead boundary by up to a batch and leaving the
readable sectors adjacent to a dead edge for the re-bisect to re-pin. On
top of that, early-yield counted those boundary-probe failures as a
stall, so the forward expand quit early AND the backward expand inherited
a poisoned unproductive counter and yielded instantly.
Now on a failed expand batch we halve the step (down to a single sector)
to recover right up to the dead edge in ~log2(batch) reads, drive the
expand loops off the deadline only (they self-terminate via halving), and
clear the unproductive streak once an island is located. patch_recovers_
good_middle_of_a_bad_range now recovers 50/50 good-middle sectors.
Scorecard: grade each handler by recovery rate (MB/s) per rip, order
best-first on later sections, log the ranking at pass end. Untried
handlers rank top so each is calibrated once before ranking narrows to
the winners. Ephemeral (reset per pass), no persistence.
Tier 0 scouts are now [Bisect, Jump, Linear-fast x2], scorecard-ordered.
Bisect leads: probing the MIDDLE of a range lands on a readable island in
one read where a linear scan grinds the dead front to reach it. Jump now
jumps to the middle of the REMAINING span (proportional) instead of a
fixed 8 MiB that leapt clean over small ranges and missed their readable
middles. Tier 1 is slow deep-recovery on the residue.
Scorecard (ephemeral, reset each pass, no persistence): grades every
handler by recovery rate (bytes/sec). run_handlers orders handlers
best-first by that rate; an untried handler ranks top so each is
calibrated once, then the ranking narrows to the winners. Logged at pass
end (phase=scorecard) so the operator sees which handler is pulling the
weight on this drive/disc and which is a dud.
Tier 0 scouts are now [Bisect, Jump, Linear-fast x2], scorecard-ordered.
Bisect leads because probing a range's MIDDLE lands on a readable island
in one read, where Jump (linear from the front, big skip) can grind the
dead front or overshoot a small range entirely. The scorecard confirms
or overturns that order with real per-disc data.
Each dead probe read costs the drive's full ~10s timeout, so a large dead
region took a dozen escalating probes. Starting the jump at 8 MiB (vs
1 MiB) clears it in a handful; a skipped span stays bad for Bisect to
reclaim readable islands, so an over-jump loses nothing.
Tier 0 is now a single fast Jump scout: it streams the big readable
ranges back and skips dead runs in seconds, so the pass reaches every
section fast and converges to the small genuine-dead residue instead of
grinding three handlers x 60s on each dead fragment. Tier 1 (fast
mop-up + slow deep reads + Bisect) works only that residue.
Bisect now expands: on a good probe it reads outward forward and
backward in full batches until a read fails, recovering the whole
readable island in large reads; the two failing ends become smaller bad
sub-ranges it bisects again. One huge bad range becomes many precisely
located small dead clusters.
Progress heartbeat: HandlerCtx gains a throttled tick (250ms) called
from every read, pushing a fresh snapshot to the reporter DURING a
handler. The bar and speed now move continuously as recovery happens
instead of jumping once per section (the reason speed read 0 B/s and the
% looked frozen between range boundaries).
Jump: on sustained batch failures skip ahead an escalating distance
(1 MiB doubling to 256 MiB) to find where readable data resumes, leaving
the skipped span for Bisect to pin — mirrors the Pass-1 damage-jump. It
leads the fast tier so a large dead run is skipped in seconds instead of
the linear sweeps grinding every dead batch (10 s each) first; on a
readable range it just streams it back. Recovers readable data buried
behind a big dead front (the 192 MB Dune range).
Progress %: report bytes RECOVERED (initial-bad minus still-pending)
instead of a per-range counter that only advanced on the final tier — so
the bar reflects the readable bulk recovered during tier 0 the instant it
lands, matching the 'MB remaining' number.
The per-range walk was depth-first: each bad range ran the full handler
chain (fast + slow deep-recovery + bisect) before the next range was
touched. So a handful of tiny dead fragments at one end of the disc
burned the whole pass and the big NonTrimmed ranges elsewhere — usually
sweep-jump over-marks that read straight back — were never attempted.
Now recovery runs in two breadth-first tiers over ALL sections:
- Tier 0 gives every section one fast full-batch attempt (fast reads
only), largest ranges first, so the recoverable bulk of the disc comes
back in the first minutes.
- Tier 1 deep-recovers only the residue tier 0 could not pull.
Per-section still-bad sets persist across tiers. Largest-first ordering
means a big readable region is reached before time is spent on tiny dead
fragments.
Linear no longer collapses a failed batch to count=1 single-sector reads
(live probing: a marginal sector recovers in a large read, not a lone
one) — a failed 32-batch stays 32 and is re-attempted at full size by the
next handler/pass; Bisect salvages readable islands.
Adds a handler-start trace line so the debug log shows which handler is
running and the hand-off to the next.
Pass-N recovery is now a chain of time-bounded recovery handlers instead
of one monolithic per-range loop that could grind the front of a bad
range for up to 30 min, wedge the drive, and abort the whole pass.
A bad range is a SubRanges set; recovery is an ordered list of
SectionHandlers (Linear{reverse,fast} covering back/forward x fast/slow,
and Bisect). A coordinator runs each handler with a hard per-handler
deadline: a handler recovers what it can (removing it from the still-bad
set) and hands the rest to the next handler; whatever is still bad after
the chain becomes NonTrimmed residue and we move on to the next range.
Guarantees, now structural rather than bolted-on:
- never hangs: every handler is deadline-bounded; the loop always drains
to recovered-or-residue.
- always moves on: a range that cannot be finished leaves residue and
advances; only a genuine transport fault or user halt ends the pass.
- extensible: a new recovery idea is one SectionHandler impl added to the
chain; a proven-ineffective one is removed. The engine never changes.
Removes ~1.9k lines of the old inner loop (watchdogs, skip escalation,
NOT_READY grind, wedge counters) and their tests. fast_capture is now
inert (the chain supersedes it); breadth-first ordering becomes a future
scheduler concern. New module: disc/section_recover.rs (8 fixture tests,
injectable clock — bounded/never-hang proven without touching a drive).
Two A/B tests updated to the chain's strictly-better recovery counts.
Every Drive::read now forces the read from physical media instead of
letting the drive satisfy it from cache. A recovery tool must not trust
the cache: on a re-read of a marginal sector the BU40N can return a
cached miss (~4 ms) instead of giving the surface a fresh physical
attempt (~40-250 ms), masking a sector that would otherwise read on a
real media hit. FUA (READ(10) byte 1 bit 3) is validated on the
BU40N/Initio bridge.
Spin the disc down (START=0, LOEJ=0) then back up (START=1) to clear the
BU40N/Initio fast-fail wedge state a run of HARDWARE_ERROR reads leaves the drive
in — the non-eject power-cycle our notes say the wedge needs. The disc stays
loaded; we never eject (slot-loading — a human eject is a product failure for an
unattended service). Validated live 2026-07-01: took the drive from
failing-every-read back to reading at MB/s.
A fast_capture pass defers every failed block to a granular pass anyway, so
spending the drive's 60s deep-recovery timeout on it here only freezes the
breadth-first sweep on a pure-bad cluster (~25s per 32-block, incl. NOT_READY
grind). Read with recovery=false in fast_capture so a bad block fails on the
short timeout (~10s) and the sweep steps on; the granular passes
(fast_capture=false) do the deep recovery on what's left. No recovery lost —
the block stays NonTrimmed for the granular retry.
A PatchOptions.fast_capture pass reads each bad range ONCE at the full batch and
leaves every FAILED block NonTrimmed for a later pass — no bisect, no per-sector
grind, no retry. This lets a first retry pass grab the readable blocks (the
sweep's good skip-ahead overshoot) of EVERY section quickly, before any single
section's slow per-sector recovery — instead of grinding section 1 to exhaustion
before even touching section 2. A later pass (fast_capture = false) does the
granular bisect/retry on what's left.
Load-bearing invariant (fixture test): NO data is dropped. A failed block becomes
NonTrimmed (pending, retried by a granular pass), NEVER Unreadable. The test pins
that the readable half of a range recovers, the bad half stays NonTrimmed (not
Unreadable), and the bad block is marked in ONE batch read with zero bisection.
Disc::copy's internal patch keeps fast_capture=false (single-call full recovery).
The library now offers a one-shot PassProgress snapshot built from a mapfile on
disk + title, so a client gets the fully-rendered drilldown without parsing the
mapfile itself — used for autorip's pass-boundary and mux-entry paints (no live
callback yet at those points). Adds a locate_ranges test covering in-feature vs
out-of-feature at-risk time (ported from autorip's removed from_map tests).
Add LocatedRange + LocatedProgress to the progress contract and a 'located'
field on PassProgress, populated by the sweep + patch emitters from the
in-memory bad-range set + title. Move the range->chapter/time annotation
(locate_ranges, range_chapter, byte_offset_in_title) into the library so a
client renders the disc map + at-risk movie time straight from PassProgress
and never reads the mapfile itself — if the mapfile becomes a mapdb, this type
and its producer change, clients don't.
PassProgress is no longer Copy (located carries a Vec); it's built once per
throttled emission and passed by reference. Non-locating phases (verify,
extract) emit LocatedProgress::default(). Adds consts::MILLIS_PER_SEC.
Consumer-side wiring (autorip drops Mapfile::load) follows.
Live drive probing (cold-single vs in-stream batch vs centered window,
one clean uncached read per sector) showed recovery RATE is identical
across approach: 3/5 every mode. The drive's per-sector ECC is
media-bound and partly stochastic, NOT approach-bound. So scatter
(seek-away recalibration + far-anchor re-read) does not improve recovery
and is dead weight — removed (function, read_good_sectors, SCATTER_*
consts, and its tests).
Add SubRanges: the still-bad (pos,len) sub-ranges of a section with
remove()/split, the work-list foundation for the upcoming per-section
recovery decomposition (recover_section -> stream/bisect/retry phase
helpers). Unit-tested; unused until the decomposition lands.
25 patch + 8 AB profile tests green; precommit clean on Rust 1.86.
Live probing on the BU40N/UHD testbed (rprobe/dprobe) settled the speed
question empirically: a marginal sector reads ~12x FASTER at MAX speed
than at slow, and slow NEVER recovered one MAX didn't. Cleanly-tested
(one uncached read per sector) the recovery RATE is identical across
speed/direction/window/batch — the drive's per-sector ECC is media-bound,
not approach-bound. The only host lever that matters is read SPEED.
So the old 'drop to 0x0000 on first failure and hold it for the whole
range' only slowed the GOOD sectors of a bad range — measured ~3x slower
overall. Now the range stays at MAX; the first failure just re-attempts
once (stochastic media) and falls through. Live A/B: 11 KB/s -> 33 KB/s,
bytes_lost unchanged.
Also: batch adaptation is now halve-on-failure / double-on-success
(geometric), so a bisected batch climbs back through clean runs from any
size (the old count==1-only upscale left it stuck at mid sizes). Removed
the dead consecutive_singles_ok counter and the inert batch-retry probe.
25 patch tests green; precommit clean on Rust 1.86.
Two patch-recovery speed fixes, grounded in live rip1 telemetry on the
Dune UHD bad regions.
1. Pull prime_cache. In the reverse walk it issued throwaway reads of
lba-3..lba-1 — i.e. straight into the not-yet-visited dead L-EC core —
grinding each ~7-9s at the fast timeout, then discarding the result.
The live trace showed a good target read (read_duration_ms=1) taking
9s wall-clock purely from the prime grind ahead of it. The dead-zone
skip (Tier 1) + scatter's recalibration read (read_good_sectors)
cover the cache-warm intent without grinding the dead zone, so prime
is redundant harm — removed (function + CACHE_PRIME_SECTORS + call).
2. Bisect on batch failure. handle_read_failure used to collapse a
failed count>1 batch straight to count=1 and single-walk the entire
batch. Now it halves (count/2) and retries the same start: a good
half recovers in BULK, the bad sector is isolated in O(log n) reads
instead of O(n). Invariant preserved — only a count==1 failure marks
NonTrimmed, so no good sector is lumped into a bad mark.
These are Tier 2 (bisect) of the progressive recovery model
(fast-mass-skip -> bisect -> scatter); composable so order can be tuned.
25 lib + 8 AB fixture tests green; precommit clean on Rust 1.86.
The 'reset, read good data, come back for one sector' technique. A
genuinely-damaged sector makes the drive grind its full recovery timeout
and still fail; re-reading consecutive bad LBAs at identical conditions
re-fails AND is the rapid-failure cadence that drops the BU40N into a
firmware fast-fail wedge (CLAUDE.md hard-rule #2).
scatter_recover: on a stuck single sector, make up to SCATTER_MAX_ATTEMPTS
fresh tries, each preceded by read_good_sectors() — a seek to a far
known-good anchor + a sustained read that re-seats the head/servo and
breaks the failure cadence. The fresh re-read uses the FAST timeout
(recovery=false) so a recalibrated marginal sector reads quick and a
truly-dead one fails fast instead of burning 60s per attempt. The seek +
good read IS the settle (matches ddrescue/MakeMKV) — no idle sleep.
Gated to genuine single-sector MEDIUM_ERROR (0x03): transport faults
still abort the pass, NOT_READY keeps its own retry path, wedge-family
senses are left for cooldown/eject. A scatter recovery is recorded
exactly like a normal read success (write-then-mark-Finished); nothing
marks a range good without a successful read + write.
Logs anchor_ms/reread_ms per attempt for live tuning. 5 fixture tests
(recover-marginal, give-up-dead, skip-non-medium, skip-batch, AACS
widen); 2 AB read-count guards raised for scatter's bounded extra reads.
Precommit green on Rust 1.86.
Pure structural refactor of the Pass-N recovery path, no behavior change.
- PatchCtx<R> holds the one-pass context (reader, pipe, shared, opts,
reused read buffer, cross-region state) and owns orchestration.
- PatchCtx::run() walks the ordered bad ranges, applies the inter-range
cooldown (armed on a grind, consumed at the next range's entry), and
stops the pass the moment a range reports halt/wedge/transport-fault.
- PatchCtx::patch_region() is the focused single-range loop: read ->
success/failure -> damage-skip -> per-range watchdog. Every former
break / break 'outer is now a typed RegionOutcome (Completed,
SkipLimit, BudgetExceeded, Wedged, Halted, TransportFault) that run()
maps back to next-range vs stop-pass exactly as before.
- recovery_read() extracts the AACS mid-unit-window widening + plain
read into one reusable helper (the building block the upcoming
scatter re-read will share).
- Logging unified onto a single dotted patch.* taxonomy (patch.region.*,
patch.read.*, patch.probe.*, patch.wedge.*, patch.batch.*,
patch.mapfile.*, patch.skip.*, patch.stall, patch.speed); the
freemkv::scan pass-boundary markers are left intact.
20/20 disc::patch tests green; precommit (fmt + clippy -D warnings +
tests) clean on Rust 1.86.
is_scsi_transport_failure recognized only the 0xFF SCSI sentinel, so the two
NON-SCSI dead-bus faults the Linux SG_IO transport returns — Error::IoError
(ioctl(SG_IO) == -1: ENODEV/EIO on an unplugged bridge) and Error::DeviceNotFound
(fd gone) — were classified as recoverable bad sectors. Every caller
(sweep read_error, patch, single-pass fill_extents) would then zero-fill /
skip-ahead across a wedged bus instead of aborting the pass and re-enumerating
the bridge — potentially zero-filling a huge span. Add both to the classifier so
a dead bus aborts the pass everywhere. (Companion to the unlock_bridge fix, which
maps the same two faults to 0xFF across the freemkv-unlock seam.)
Round-2 audit gap in the prior bridge fix: extract_scsi_context only recognizes
Error::ScsiError / DiscRead and collapses every other variant to (0, None). But
the Linux SG_IO transport returns genuine dead-bus faults as non-SCSI variants —
Error::IoError (ioctl(SG_IO) == -1: ENODEV/EIO on an unplugged bridge) and
Error::DeviceNotFound (fd gone) — which were crossing the seam as status 0x00, so
the unlock crate classified neither as a transport fault (needs 0xFF) nor as a
sense-bearing rejection, and kept hammering a dead bus.
Match the error variant in the adapter: a SCSI status (CHECK CONDITION or a
drive-tagged 0xFF) keeps its real status + sense; any other variant is a
non-SCSI transport/IO fault → SCSI_STATUS_TRANSPORT_FAILURE / None. Keying off
`sense.is_none()` would be wrong (a senseless CHECK CONDITION is a rejection).
Add bridge tests covering CHECK-CONDITION sense preservation, 0xFF passthrough,
and IoError/DeviceNotFound → 0xFF.
DiscStream (the live-drive single-pass path) enables AACS decrypt-loss
concealment (NULL-TS fill on an undecryptable unit) but, unlike the file-backed
PipelinedPesStream, had no B1 resync gate — so after a concealed gap it forwarded
inter-coded video frames referencing the now-missing data, producing
decode-broken MKV output (dangling-reference frames).
Mirror PipelinedPesStream: add per-stream ResyncGate + is_video, and route every
codec-frame emit on the TS path (in-stream parse, demuxer EOF flush, parser EOF
flush) through gate.admit(is_video, frame.discontinuity, frame.keyframe) so a
video track drops forward to the next keyframe after a concealment event. Warn
once if a gate is still armed at EOF (a concealed gap in the final GOP with no
trailing keyframe). Audio/subtitle always admit.
Audit fixes (v1.1.0..HEAD regressions in the unlock migration + adaptive patch
speed):
- unlock_bridge ScsiAdapter: libfreemkv's transport returns Err on ANY non-zero
SCSI status (a normal CHECK CONDITION), not only transport faults. The adapter
was collapsing every such Err to { status: 0xFF, sense: None }, which discarded
the parsed sense and defeated the AACS handshake's ILLEGAL_REQUEST wedge guard
(so it kept hammering the drive — hard-rule #2) and inverted its
transport-vs-rejection diagnosis. Now reconstruct status + the 32-byte sense
buffer (sense_key@2, asc@12, ascq@13) and only emit 0xFF/None for a genuine
transport fault.
- Drive::init: a genuine transport fault during the drive-prep unlock means the
bus is dead — propagate it (the v1.1.0 invariant) instead of silently
swallowing it via `if let Ok`. Other errors (no matching unlocker) still fall
through to stock mode. SET CD SPEED max now runs only when the bus is alive.
- disc::patch: on the first read failure in a range, drop to slow recovery speed
and RE-ATTEMPT the same position at slow speed before marking it. A
single-sector range's first failing sector was being marked from a MAX-speed
read it never got to recover.
- docs: lib.rs architecture diagram (handshake → host_certs) and README (stale
pluggable-unlock-seam / register-unlocker / crates.io / docs.rs references).
Two recovery-path fixes:
- patch: log the per-range speed transitions (INFO, phase="patch_speed") — each
range enters at 0xFFFF (max) and drops to 0x0000 (slow recovery) on its first
read failure. Previously the adaptive-speed behavior was invisible in the logs.
- drive init: issue the generic SET CD SPEED max UNCONDITIONALLY at drive-open,
not only when a firmware unlocker matched. A stock-mode BD/UHD drive (no
firmware unlock) was left riplocked because the call sat inside the
unlocker-matched branch.
libfreemkv now git-deps freemkv-unlock (which carries drive firmware and can
never be on crates.io), so libfreemkv itself can only be consumed by git tag.
The freemkv-unlock dep stays an interim path dep for local cross-repo dev; the
release script swaps it to a git tag in the tagged commit.
Rewire the three unlock dispatch points through the freemkv-unlock crate via a
private `unlock_bridge`: drive-prep (kind=Unknown) at `Drive::init`, AACS cert
(kind=Aacs) at `do_handshake_cert`, CSS bus-auth (kind=Css) at scan. The bridge
news up `all_unlockers()` and runs the first matching one, mapping its
`Unlocked` result to the bus-key gate. After a successful drive unlock,
libfreemkv issues a generic SET CD SPEED (max) itself — the old per-unlocker
trait method is gone.
Delete the in-tree unlock code now owned by freemkv-unlock: the AACS cert
handshake (`aacs/handshake.rs`), the CSS bus-auth (`css/auth.rs`), and the
unlock registry (`unlock.rs`). Host-cert collection (a keysource concern) stays
in a small `aacs/host_certs.rs`. No public unlock surface remains — clients
touch libfreemkv only, oblivious to unlockers (as they are to SCSI). 2277 tests
pass.
Add the freemkv-unlock dependency (path dep for local dev; re-pinned to a git
tag at release) and the consumption bridge: one generic ScsiAdapter mapping
libfreemkv's transport to the unlock contract, host-cert + DriveId mapping, and
run_unlockers() which news up all_unlockers() and runs the first matching one.
Additive — validates the dep resolves and the adapter compiles; the in-tree
registry/handshake/css path is still active and gets replaced in 4b.
Pull the wedge-guarded cert loop and host-cert collection out of the in-tree
AacsCertUnlocker into public aacs::handshake primitives (run_cert_handshake +
CertHandshake, collect_host_certs). The in-tree path now delegates to them, so
the external freemkv-unlock-aacs plugin runs the IDENTICAL cert handshake — one
implementation, two callers. Pure refactor of the live AACS path; the existing
handshake + collect_host_certs unit tests validate it unchanged.
Replace route_unlock's Option<(name, Vid)> with a structured UnlockRoute
{ Unlocked(name, Unlocked) | Failed(UnlockError) | NoMatch } so a single
dispatch serves every caller: drive-prep wants "did anything unlock", and the
AACS cert route (next) needs the FAILURE REASON to render "missing keys" vs
"host cert rejected" instead of collapsing it to a bare None. Only a genuine
SCSI transport fault still returns Err (abort). UnlockCtx gains an optional
ScanOptions (the cert route's host-cert source), and read_mkb_from_drive now
takes &mut dyn ScsiTransport — both prerequisites for the cert handshake to
become an external freemkv-unlock-aacs unlocker. Drive-prep + CSS callers fold
the new outcome; no behavior change.
Extend Unlocked with drive_unlocked + read_data_key_err so the registry result
carries everything the downstream bus-key gate needs — a firmware unlocker sets
drive_unlocked=true (bus encryption removed at the drive, no bus key), the cert
route will set read_data_key (+ read_data_key_err on a failed bus-key read).
route_unlock now returns the full Unlocked rather than just a Vid, so a single
dispatch can fold the firmware, cert, and CSS results uniformly. Prep for the
AACS cert handshake becoming a registry unlocker.
Convert the CSS read-unlock into a first-class registry Unlocker (CssUnlocker)
dispatched through route_unlock like every other barrier removal, instead of
a direct call in scan. libfreemkv appends the built-in CSS unlocker (and, next,
the AACS cert handshake) exactly once via ensure_builtins(), AFTER any
client-registered firmware unlocker — so the registry order is firmware → cert
→ css, owned by the lib, not the client.
Defense in depth: the unlocker does NOT trust the caller-declared DiscKind.
matches() filters on the declared kind (Css), but unlock() self-verifies
against the drive's GET CONFIGURATION profile and refuses (UnlockError::
NotApplicable, a new shared "this unlocker doesn't apply" variant) WITHOUT
issuing a single CSS CDB if the drive reports a non-DVD profile — so a
mis-routed Blu-ray is never sent CSS bus-auth. Guard the firmware unlocker the
same structural way (it matches only the drive-prep phase, kind == Unknown).
Tests: CssUnlocker matches only DiscKind::Css; a BD-profile drive yields
NotApplicable with zero CSS CDBs issued.
Reshape the Unlocker seam so every unlocker is dispatched at ONE place from
ONE ordered registry — the firmware, cert, and CSS routes are all "remove the
bus-encryption barrier", differing only in what they key off. matches() and
unlock() now take an UnlockCtx { drive_id, kind: DiscKind } instead of a bare
DriveId: a firmware unlocker keys off drive_id (kind irrelevant), the cert
unlocker will match DiscKind::Aacs, the CSS unlocker DiscKind::Css. UnlockCtx
is #[non_exhaustive] so a host-cert source can be added without breaking
external unlockers. Drive-prep dispatch passes DiscKind::Unknown (no disc
probed yet); the cert/CSS registry impls + the single post-probe dispatch
point follow in subsequent commits.
Thread &mut dyn ScsiTransport through unlock_css_reads and its bus-auth /
disc-key primitives instead of &mut Drive — they only ever issued SCSI via
drive.scsi_mut(), so this is mechanical and lossless, and it makes the CSS
unlock speak the same transport interface as the registry Unlocker trait
(prerequisite for CSS becoming a uniform unlocker).
Also clean up the badly-named, half-dead bus_auth:
- rename bus_auth -> establish_authenticated_session: it is run for its
side effect (sets the drive's ASF=1, unlocking scrambled-sector reads),
which the name now states.
- drop the derived CSS bus key from the return + computation: it had no
consumer (descrambling is keyless via the Stevenson attack), so it was
dead crypto computed on every DVD unlock. Return just the negotiated AGID,
which the caller genuinely needs for the best-effort disc-key REPORT KEY.
The AACS cert-auth primitives (aacs_authenticate, the AACS 2.0 P-256
variants, read_volume_id, read_data_keys) and their scsi_read/scsi_write
helpers touched the drive ONLY through Drive::scsi_execute — a pure
pass-through to the transport. Thread &mut dyn ScsiTransport instead of
&mut Drive so these primitives are transport-level, matching the firmware
Unlocker seam (which hands out &mut dyn ScsiTransport for testability).
Pure mechanical signature change, no logic change; the cert orchestrator
(do_handshake_cert) keeps &mut Drive for the OEM-VID shortcut and passes
session.scsi_mut() into the primitives. Step toward making the cert
handshake a uniform registry unlocker.
Generalize the unlock seam toward uniform unlockers (firmware / cert / CSS).
`unlock` now reports what it LEARNED — a Volume ID and/or an AACS bus key —
instead of just a Vid; libfreemkv files those onto the disc/drive in one
place, so a plugin never touches Disc. The hardware side-effect (extended
mode) still happens inside unlock. route_unlock walks the registry in
registration order (the single ordered place that decides run order); no
priority field. Firmware route reports {vid: Some, read_data_key: None}.
The bus-key gate only credited the cert handshake's read_data_key as proof
bus encryption was removed. A firmware unlocker removes it AT THE DRIVE
(serves clear content) and yields no read_data_key — so a SUCCESSFUL
firmware unlock (VID present, read_data_key None) tripped the gate and
blocked ALL key resolution, including the online source. That was the
root cause of live UHD discs reporting "missing keys" after an unlock.
Now a single predicate answers "is bus encryption gone?": never-had-it ||
file/ISO || firmware-unlocked || cert-bus-key. The gate is just
`if !bus_encryption_removed { error }` — no enumerated cases. HandshakeResult
gains `drive_unlocked`, and the read_data_key failure reason is captured so
the warn says WHY the bus key is missing.
Also: reword the first hardware-sense escalation as "fast-fail escalation"
(it is often transient — the drive recovers), reserving "wedge" for a
persistent run; and scrub the product name from core comments (it belongs
only in the unlocker crate).
When a bus-encrypted disc's handshake yields no read_data_key, the gate
logged a bare "bus_key_unavailable" with no indication of WHY — turning
every occurrence into archaeology (is the bus key not-attempted, or did
the read fail?).
Now:
- read_data_keys failure is captured (error code) instead of swallowed by
`.ok()`, and logged at the handshake with its consequence.
- HandshakeResult carries `read_data_key_err: Option<u16>` so the gate
distinguishes "never attempted" (None — VID-only/OEM path) from "read
FAILED" (a code), and the bus_key_unavailable warn now reports the code
plus whether a Volume ID was present.
No behavior change — purely diagnostic. The handshake_ok debug also now
reports has_volume_id.
Two defensive hardenings from the post-fix audit (vs FFmpeg/GStreamer):
1. Move the `pes.discontinuity` partial-drop ABOVE the empty-data guard in
all three audio parsers (ac3/dts/truehd), so a discontinuity signal can
never be stranded by an empty post-gap PES. The demuxer only emits
non-empty PES today; this is defense-in-depth for any future caller.
2. A PES with no PTS must not reset the timeline to 0. ac3 now carries
`flush_pts_ns`, dts continues from the most recent known base; truehd
already kept its running cadence on a None PTS. Matches OSS behavior
(PTS rebases off the next PES that actually carries a PTS).
Adds an ac3 regression test (empty-payload discontinuity PES still drops
the stranded partial). Loss accounting was reviewed: TS-demux CC-gaps are
NOT counted toward lost_video_secs / abort (that is sector-based via
DiscStream::errors / mapfile bytes_unreadable), so a source splice never
inflates loss — no gating needed there.
The AC-3, DTS and TrueHD parsers buffer access units across PES
boundaries. At a concealed-loss gap the buffered unit is truncated:
splicing post-gap bytes onto it manufactures a corrupt frame on top of
the real loss (FFmpeg "Failed to decode block code(s)" / "Invalid data
found" at the gap) and, for TrueHD, strands the PTS cadence into the
non-monotonic audio-DTS band seen on multi-clip titles.
The video parsers already handle this via the ResyncGate, but the
discontinuity signal was only wired into video — audio parsers ignored
pes.discontinuity and spliced across the gap.
Now, when pes.discontinuity is set, each audio parser drops the partial
(clears buf, and for DTS its PTS marks / pending base) so the post-gap
PES re-bases a fresh unit. A lost gap degrades to a clean single-frame
drop instead of a corrupt spliced frame. No effect on perfect rips: the
branch only runs when concealment inserted a discontinuity marker.
Adds a per-parser test feeding a partial frame then a discontinuity PES,
asserting the truncated partial is dropped (not spliced) and the post-gap
PTS is adopted.
Matthew Jackson