Matthew Jackson
2efe1425d6
There were TWO top-level decrypt paths: decrypt_sectors_impl for CSS and clear media, whose AACS arm was a bare `return Err` stub, and a wholly separate decrypt_sectors_mapped for AACS. Each scheme therefore decided its own answer to "there is no key for these bytes", and nothing held them to the same one. They drifted, in opposite directions, within a single release: css::descramble_region descrambled with a key the sector's own crib had just proven stale — garbage behind an intact clear header, reported Ok. the mapped path returned early for any LBA outside every range, before ever asking whether those bytes were ciphertext, so an unkeyable encrypted unit passed through and extract counted it as good. Both were fixed individually earlier today. This removes the shape that allowed them. decrypt_span is now the single orchestrator: it owns the loop, the refusal, and the loss count, and each scheme supplies only what genuinely differs. apply_aacs_map is a scheme step that reports what it could not open; it no longer decides what that means. The public wrappers (decrypt_sectors, _in_content, _mapped) are unchanged in signature and all funnel through it. Adding a scheme now means adding an arm here, which means answering the refusal question. That is the point. The new test asserts ONE verdict across all three schemes — AACS with no map, AACS with an encrypted unit outside every range, and CSS whose re-crack failed — plus that clear media is NOT a refusal. A per-scheme test cannot hold this: each would keep passing while the two disagreed. Flipping the AACS arm back to pass-through reds it. Also removes the last of the tracing-capture scaffolding. Serialising those captures crate-wide did not fix the 1-in-10 flake, and asserting the predicates directly made the helper, both capture subscribers and an unrelated dead OrderSink unused. Deleted rather than left behind.
libfreemkv
Rust library for 4K UHD / Blu-ray / DVD optical drives. Drive access, disc scanning, stream labels, AACS decryption, CSS decryption, KEYDB updates, and content reading in one crate. Drive-level unlocking is handled internally; consumers work with disc access and decryption only.
DVDs (CSS) decrypt out of the box. Blu-ray and UHD (AACS) require a keydb.cfg (default ~/.config/freemkv/keydb.cfg) supplying disc-specific volume unique keys; no AACS key material is compiled in.
12+ MB/s sustained read speeds on BD. Drive prep (init()) handles unlocking internally via the freemkv-unlock crate — clients never see it; when no drive unlock applies, the library rips via the host-certificate AACS handshake.
Multi-lingual by design — the library outputs structured data and numeric error codes, never English text. Build any UI or localization on top.
Part of the freemkv project.
Install
Consumed by git tag (not published to crates.io):
[dependencies]
libfreemkv = { git = "https://github.com/freemkv/libfreemkv", tag = "vX.Y.Z" }
Quick Start
use libfreemkv::{Drive, Disc, ScanOptions};
use std::path::Path;
// Open drive — identified via INQUIRY
let mut drive = Drive::open(Path::new("/dev/sg4"))?;
drive.wait_ready()?; // wait for disc
drive.init()?; // unlock + prep (handled internally)
drive.probe_disc()?; // probe disc surface for optimal speeds
// Scan disc — UDF, playlists, streams, AACS (all automatic)
let disc = Disc::scan(&mut drive, &ScanOptions::default())?;
for title in &disc.titles {
println!("{} — {} streams", title.duration_display(), title.streams.len());
}
// Stream pipeline — read PES frames from any source, write to any output
let opts = libfreemkv::InputOptions::default();
let mut input = libfreemkv::input("iso://Disc.iso", &opts)?;
let title = input.info().clone();
let mut output = libfreemkv::output("mkv://Movie.mkv", &title)?;
while let Ok(Some(frame)) = input.read() {
output.write(&frame)?;
}
output.finish()?;
Multi-pass recovery rip
Recovery moved OUT of this crate in 1.6.0. The sweep/patch strategy, the
ddrescue mapfile, damage classification and the multipass loop now live in the
freemkv-engine crate as freemkv_engine::recovery::{copy, sweep, patch}.
libfreemkv keeps the layers underneath: the raw single-shot read
(Drive::read) and the SCSI-fact translation (SenseFamily) that the engine's
strategy is built on. The dependency runs engine → libfreemkv, so this crate
cannot call into it; front-ends get recovery from the engine directly. See
docs/rip-recovery.md for what stayed here.
What It Does
- Drive access — open, identify, internal unlock + prep, speed control, eject
- 12+ MB/s reads — auto-detects kernel transfer limits, sustained full speed
- Disc scanning — UDF 2.50 filesystem, MPLS playlists, CLPI clip info
- Stream labels — 5 BD-J format parsers (Paramount, Criterion, Pixelogic, CTRM, Deluxe)
- AACS decryption — transparent key resolution and content decrypt (1.0 + 2.0 bus decryption)
- KEYDB updates — download, verify, save from any HTTP URL (zero deps, raw TCP)
- Content reading — adaptive batch reads with automatic decryption
- Stream I/O — unified stream pipeline for reading and writing any format
Streams
| Stream | Input | Output | Transport |
|---|---|---|---|
| DiscStream | Yes | -- | Optical drive via SCSI |
| IsoStream | Yes | -- | Blu-ray ISO image file (read via stream pipeline; written by freemkv_engine::recovery) |
| MkvStream | Yes | Yes | Matroska container |
| M2tsStream | Yes | Yes | BD transport stream with FMKV metadata header |
| NetworkStream | Yes (listen) | Yes (connect) | TCP with FMKV metadata header |
| StdioStream | Yes (stdin) | Yes (stdout) | Raw byte pipe |
| NullStream | -- | Yes | Discard sink (byte counter for benchmarks) |
Streams implement a single unified pes::Stream trait (re-exported as PesStream) exposing read() and write() on one type. input() / output() resolve URL strings to PES stream instances. All URLs use the scheme://path format — bare paths are rejected.
Keys
DVDs (CSS) decrypt out of the box, with no external key file needed.
Blu-rays and UHD (AACS) require a keydb.cfg at ~/.config/freemkv/keydb.cfg (or passed via ScanOptions). No AACS key material is compiled into the binary.
Architecture
Drive — open, identify, init, single-shot read
├── ScsiTransport — SG_IO (Linux), IOKit (macOS), SPTI (Windows)
└── unlock_bridge — private seam to the freemkv-unlock crate
(firmware / AACS cert / CSS bus-auth unlockers)
Disc — scan titles, streams, AACS/CSS state
├── UDF reader — Blu-ray UDF 2.50 with metadata partitions
├── MPLS parser — playlists → titles + clips + streams
├── CLPI parser — clip info → EP map → sector extents
├── IFO parser — DVD title sets, PGC chains, cell addresses
├── Labels — 5 BD-J format parsers (detect + parse)
├── AACS — key resolution + content decryption
├── CSS — DVD CSS (bus auth → player-key disc crack → known-plaintext title-key attack)
└── KEYDB — download + verify + save
Streams — unified PES pipeline
├── PesStream — pes::Stream: one trait, read()/write() PES frames
├── DiscStream — sectors → decrypt → TS demux → PES
├── IsoStream — ISO file → decrypt → TS demux → PES
├── MkvStream — MKV mux/demux
├── M2tsStream — BD transport stream
├── NetworkStream — TCP with FMKV metadata header
├── StdioStream — stdin/stdout pipe
└── NullStream — discard sink
See docs/ for detailed technical documentation on each module.
Error Codes
All errors are structured with numeric codes. No user-facing English text — applications format their own messages.
| Range | Category |
|---|---|
| E1xxx | Device errors (not found, permission) |
| E2xxx | Profile errors (unsupported drive) |
| E3xxx | Unlock errors (failed, signature) |
| E4xxx | SCSI errors (command failed, timeout) |
| E5xxx | I/O errors |
| E6xxx | Disc format errors |
| E7xxx | AACS errors |
| E8xxx | KEYDB update errors |
| E9xxx | Stream / mux errors (URL, PES, ISO, pipeline, demux) |
Platform Support
| Platform | Status | Backend |
|---|---|---|
| Linux | Supported | SG_IO ioctl |
| macOS | Supported | IOKit SCSITask |
| Windows | Supported | SPTI |
Contributing
Run freemkv info disc:// --share with the freemkv CLI to capture your drive's identity for contribution. Drive-unlock profiles are maintained in the freemkv-unlock repository.
License
MIT