Matthew Jackson
3ecb2510e8
A mutation run over mux/mkv.rs and mux/mkvstream.rs left 148 survivors.
Reading them turned up no wrong code, but a lot of code whose output
nothing ever looked at. Most of that is on the read side: parse_track
had a dedicated arm for Language, TrackName, FlagForced, Video and
Channels and not one of them was checked, so a re-mux could have lost
the audio language, the subtitle forced flag, every track label, the
resolution and the channel layout with the suite still green. Ten of
the eleven CodecID comparisons were unasserted too — only HEVC was
pinned — so any of them could have been mis-wired and the stream would
have gone to the wrong parser. The round-trip test now writes a real
three-track title through the muxer and reads it back through the
reader, and a separate test walks every registered CodecID.
The BPS statistics tag was the worst of the write side. Its test
asserted `file_bytes.contains("800")`, which a wrong bitrate passes
trivially — 80000 contains "800". Both the tag and the back-patched
Segment duration are now decoded and compared to a computed number, on
a title that declares no duration so the whole max_block_ticks →
seconds → bits chain is exercised. Cue points get the same treatment:
their CueTrack and CueClusterPosition were never read back, on either
the keyframe path or the i16-forced-split path, which are two hand-
written copies of the same three fields.
The rest closes arithmetic that only a bad disc reaches: a zero frame
rate or zero display-aspect denominator (both divisions), a
TimestampScale that does not fit an i64, a cluster timestamp of exactly
i64::MAX, a TrackNumber of 65537 that truncates onto the valid track 1,
and the shortest legal Block at both VINT widths. Two tests separate a
clean end of stream from a device failure: swallowing the second one
truncates the output at a bad sector and reports the rip complete.
Also pinned: only the first video and first audio track may be default
(the de-duplication lives in MkvStream::create and had no test at all),
the activation trigger is the first VIDEO track rather than track 0,
the measured field order reaches the file rather than just the helper
that computes it, and a Blu-ray 3D base/dependent pair builds the merge
instead of shipping two unrelated H.264 tracks.
96 of the 148 mutants verified killed by hand. Of the remainder, most
are equivalent — disjoint-bit `|` that `^` cannot change, delete-arm
mutants whose fallback is the same constant, guards on tracing calls —
and the write_frame branch at 1452 is unreachable: a cluster is always
open by the time it can be entered.
libfreemkv
Rust library for 4K UHD / Blu-ray / DVD optical drives. Drive access, disc scanning, stream labels, AACS decryption, CSS decryption, KEYDB updates, and content reading in one crate. Drive-level unlocking is handled internally; consumers work with disc access and decryption only.
DVDs (CSS) decrypt out of the box. Blu-ray and UHD (AACS) require a keydb.cfg (default ~/.config/freemkv/keydb.cfg) supplying disc-specific volume unique keys; no AACS key material is compiled in.
12+ MB/s sustained read speeds on BD. Drive prep (init()) handles unlocking internally via the freemkv-unlock crate — clients never see it; when no drive unlock applies, the library rips via the host-certificate AACS handshake.
Multi-lingual by design — the library outputs structured data and numeric error codes, never English text. Build any UI or localization on top.
Part of the freemkv project.
Install
Consumed by git tag (not published to crates.io):
[dependencies]
libfreemkv = { git = "https://github.com/freemkv/libfreemkv", tag = "vX.Y.Z" }
Quick Start
use libfreemkv::{Drive, Disc, ScanOptions};
use std::path::Path;
// Open drive — identified via INQUIRY
let mut drive = Drive::open(Path::new("/dev/sg4"))?;
drive.wait_ready()?; // wait for disc
drive.init()?; // unlock + prep (handled internally)
drive.probe_disc()?; // probe disc surface for optimal speeds
// Scan disc — UDF, playlists, streams, AACS (all automatic)
let disc = Disc::scan(&mut drive, &ScanOptions::default())?;
for title in &disc.titles {
println!("{} — {} streams", title.duration_display(), title.streams.len());
}
// Stream pipeline — read PES frames from any source, write to any output
let opts = libfreemkv::InputOptions::default();
let mut input = libfreemkv::input("iso://Disc.iso", &opts)?;
let title = input.info().clone();
let mut output = libfreemkv::output("mkv://Movie.mkv", &title)?;
while let Ok(Some(frame)) = input.read() {
output.write(&frame)?;
}
output.finish()?;
Multi-pass recovery rip
Recovery moved OUT of this crate in 1.6.0. The sweep/patch strategy, the
ddrescue mapfile, damage classification and the multipass loop now live in the
freemkv-engine crate as freemkv_engine::recovery::{copy, sweep, patch}.
libfreemkv keeps the layers underneath: the raw single-shot read
(Drive::read) and the SCSI-fact translation (SenseFamily) that the engine's
strategy is built on. The dependency runs engine → libfreemkv, so this crate
cannot call into it; front-ends get recovery from the engine directly. See
docs/rip-recovery.md for what stayed here.
What It Does
- Drive access — open, identify, internal unlock + prep, speed control, eject
- 12+ MB/s reads — auto-detects kernel transfer limits, sustained full speed
- Disc scanning — UDF 2.50 filesystem, MPLS playlists, CLPI clip info
- Stream labels — 5 BD-J format parsers (Paramount, Criterion, Pixelogic, CTRM, Deluxe)
- AACS decryption — transparent key resolution and content decrypt (1.0 + 2.0 bus decryption)
- KEYDB updates — download, verify, save from any HTTP URL (zero deps, raw TCP)
- Content reading — adaptive batch reads with automatic decryption
- Stream I/O — unified stream pipeline for reading and writing any format
Streams
| Stream | Input | Output | Transport |
|---|---|---|---|
| DiscStream | Yes | -- | Optical drive via SCSI |
| IsoStream | Yes | -- | Blu-ray ISO image file (read via stream pipeline; written by freemkv_engine::recovery) |
| MkvStream | Yes | Yes | Matroska container |
| M2tsStream | Yes | Yes | BD transport stream with FMKV metadata header |
| NetworkStream | Yes (listen) | Yes (connect) | TCP with FMKV metadata header |
| StdioStream | Yes (stdin) | Yes (stdout) | Raw byte pipe |
| NullStream | -- | Yes | Discard sink (byte counter for benchmarks) |
Streams implement a single unified pes::Stream trait (re-exported as PesStream) exposing read() and write() on one type. input() / output() resolve URL strings to PES stream instances. All URLs use the scheme://path format — bare paths are rejected.
Keys
DVDs (CSS) decrypt out of the box, with no external key file needed.
Blu-rays and UHD (AACS) require a keydb.cfg at ~/.config/freemkv/keydb.cfg (or passed via ScanOptions). No AACS key material is compiled into the binary.
Architecture
Drive — open, identify, init, single-shot read
├── ScsiTransport — SG_IO (Linux), IOKit (macOS), SPTI (Windows)
└── unlock_bridge — private seam to the freemkv-unlock crate
(firmware / AACS cert / CSS bus-auth unlockers)
Disc — scan titles, streams, AACS/CSS state
├── UDF reader — Blu-ray UDF 2.50 with metadata partitions
├── MPLS parser — playlists → titles + clips + streams
├── CLPI parser — clip info → EP map → sector extents
├── IFO parser — DVD title sets, PGC chains, cell addresses
├── Labels — 5 BD-J format parsers (detect + parse)
├── AACS — key resolution + content decryption
├── CSS — DVD CSS (bus auth → player-key disc crack → known-plaintext title-key attack)
└── KEYDB — download + verify + save
Streams — unified PES pipeline
├── PesStream — pes::Stream: one trait, read()/write() PES frames
├── DiscStream — sectors → decrypt → TS demux → PES
├── IsoStream — ISO file → decrypt → TS demux → PES
├── MkvStream — MKV mux/demux
├── M2tsStream — BD transport stream
├── NetworkStream — TCP with FMKV metadata header
├── StdioStream — stdin/stdout pipe
└── NullStream — discard sink
See docs/ for detailed technical documentation on each module.
Error Codes
All errors are structured with numeric codes. No user-facing English text — applications format their own messages.
| Range | Category |
|---|---|
| E1xxx | Device errors (not found, permission) |
| E2xxx | Profile errors (unsupported drive) |
| E3xxx | Unlock errors (failed, signature) |
| E4xxx | SCSI errors (command failed, timeout) |
| E5xxx | I/O errors |
| E6xxx | Disc format errors |
| E7xxx | AACS errors |
| E8xxx | KEYDB update errors |
| E9xxx | Stream / mux errors (URL, PES, ISO, pipeline, demux) |
Platform Support
| Platform | Status | Backend |
|---|---|---|
| Linux | Supported | SG_IO ioctl |
| macOS | Supported | IOKit SCSITask |
| Windows | Supported | SPTI |
Contributing
Run freemkv info disc:// --share with the freemkv CLI to capture your drive's identity for contribution. Drive-unlock profiles are maintained in the freemkv-unlock repository.
License
MIT