Matthew Jackson
46eb88c51f
Seven defects in the code the test suite executes least — 913 lines of disc/mod.rs alone are run by no test at all, which is why this round scoped from coverage rather than from what previous rounds said they had read. Disc::scan_image kept its own copy of the crack's extent ordering and fed crack_key_outcome largest-cell-first. That is the fifth instance in this audit of a local reimplementation drifting from the canonical one, and the cost here is a key that does not descramble the feature: picking by sector count bypasses the capacity gate and can select a different VTS entirely. The copy is gone — which title comes from the canonical order the scan already applied, and the extents are handed over in playback order, exactly as decrypt_keys_for_title does. Its doc records why the duplicate existed so it cannot grow back. Resolution::pixels returned 1920x1080 for Unknown. That is the FOURTH instance of one trap and the other three were in this same file, two of them fixed hours earlier — without sweeping for siblings, which is the whole reason this one survived. It now returns (0, 0), and the sweep was done properly this time: every remaining Unknown arm across the crate is honest, and the two ColorSpace sites that look like fabrication are emitting H.273 code point 2, which is the spec's own "unspecified". Two callers carried local Unknown-to-zero workarounds — precisely the cost of making callers responsible for a lie — and one is now redundant. BD-ROM Part 3 code 0xA2 is the lossy secondary DTS stream, not lossless Master Audio. A test asserted the wrong mapping as intended behaviour, so correcting the code failed it; the test is deleted with a note pointing at its replacement. That is a NEW failure mode for this audit: not a test that cannot fail, but one that locks the defect in. There is no DtsExpress variant to map to, so it takes the lossy DTS-HD member and the approximation is documented. Also: DiscSession::identify could panic through drive_mut once the public API allows an absent drive — two siblings were converted in an earlier round and this one was missed; an extent end that added without saturating where the rest of the crate saturates; a diag reason string restating the comparator's sort keys and drifting from them, now derived from them; and a short read that advanced the offset by the full request, silently skipping the gap. That last one existed twice, in two reads with the same shape, now merged so they cannot drift apart. The short-read policy is a judgement call I could not derive from a spec: no skip_errors is a hard error, with skip_errors zero-fills and charges the loss. It deliberately does not retry mid-unit, because resuming inside an AACS aligned unit would trade a silent gap for a silent decrypt desync — the worse of the two.
libfreemkv
Rust library for 4K UHD / Blu-ray / DVD optical drives. Drive access, disc scanning, stream labels, AACS decryption, CSS decryption, KEYDB updates, and content reading in one crate. Drive-level unlocking is handled internally; consumers work with disc access and decryption only.
DVDs (CSS) decrypt out of the box. Blu-ray and UHD (AACS) require a keydb.cfg (default ~/.config/freemkv/keydb.cfg) supplying disc-specific volume unique keys; no AACS key material is compiled in.
12+ MB/s sustained read speeds on BD. Drive prep (init()) handles unlocking internally via the freemkv-unlock crate — clients never see it; when no drive unlock applies, the library rips via the host-certificate AACS handshake.
Multi-lingual by design — the library outputs structured data and numeric error codes, never English text. Build any UI or localization on top.
Part of the freemkv project.
Install
Consumed by git tag (not published to crates.io):
[dependencies]
libfreemkv = { git = "https://github.com/freemkv/libfreemkv", tag = "vX.Y.Z" }
Quick Start
use libfreemkv::{Drive, Disc, ScanOptions};
use std::path::Path;
// Open drive — identified via INQUIRY
let mut drive = Drive::open(Path::new("/dev/sg4"))?;
drive.wait_ready()?; // wait for disc
drive.init()?; // unlock + prep (handled internally)
drive.probe_disc()?; // probe disc surface for optimal speeds
// Scan disc — UDF, playlists, streams, AACS (all automatic)
let disc = Disc::scan(&mut drive, &ScanOptions::default())?;
for title in &disc.titles {
println!("{} — {} streams", title.duration_display(), title.streams.len());
}
// Stream pipeline — read PES frames from any source, write to any output
let opts = libfreemkv::InputOptions::default();
let mut input = libfreemkv::input("iso://Disc.iso", &opts)?;
let title = input.info().clone();
let mut output = libfreemkv::output("mkv://Movie.mkv", &title)?;
while let Ok(Some(frame)) = input.read() {
output.write(&frame)?;
}
output.finish()?;
Multi-pass recovery rip
Recovery moved OUT of this crate in 1.6.0. The sweep/patch strategy, the
ddrescue mapfile, damage classification and the multipass loop now live in the
freemkv-engine crate as freemkv_engine::recovery::{copy, sweep, patch}.
libfreemkv keeps the layers underneath: the raw single-shot read
(Drive::read) and the SCSI-fact translation (SenseFamily) that the engine's
strategy is built on. The dependency runs engine → libfreemkv, so this crate
cannot call into it; front-ends get recovery from the engine directly. See
docs/rip-recovery.md for what stayed here.
What It Does
- Drive access — open, identify, internal unlock + prep, speed control, eject
- 12+ MB/s reads — auto-detects kernel transfer limits, sustained full speed
- Disc scanning — UDF 2.50 filesystem, MPLS playlists, CLPI clip info
- Stream labels — 5 BD-J format parsers (Paramount, Criterion, Pixelogic, CTRM, Deluxe)
- AACS decryption — transparent key resolution and content decrypt (1.0 + 2.0 bus decryption)
- KEYDB updates — download, verify, save from any HTTP URL (zero deps, raw TCP)
- Content reading — adaptive batch reads with automatic decryption
- Stream I/O — unified stream pipeline for reading and writing any format
Streams
| Stream | Input | Output | Transport |
|---|---|---|---|
| DiscStream | Yes | -- | Optical drive via SCSI |
| IsoStream | Yes | -- | Blu-ray ISO image file (read via stream pipeline; written by freemkv_engine::recovery) |
| MkvStream | Yes | Yes | Matroska container |
| M2tsStream | Yes | Yes | BD transport stream with FMKV metadata header |
| NetworkStream | Yes (listen) | Yes (connect) | TCP with FMKV metadata header |
| StdioStream | Yes (stdin) | Yes (stdout) | Raw byte pipe |
| NullStream | -- | Yes | Discard sink (byte counter for benchmarks) |
Streams implement a single unified pes::Stream trait (re-exported as PesStream) exposing read() and write() on one type. input() / output() resolve URL strings to PES stream instances. All URLs use the scheme://path format — bare paths are rejected.
Keys
DVDs (CSS) decrypt out of the box, with no external key file needed.
Blu-rays and UHD (AACS) require a keydb.cfg at ~/.config/freemkv/keydb.cfg (or passed via ScanOptions). No AACS key material is compiled into the binary.
Architecture
Drive — open, identify, init, single-shot read
├── ScsiTransport — SG_IO (Linux), IOKit (macOS), SPTI (Windows)
└── unlock_bridge — private seam to the freemkv-unlock crate
(firmware / AACS cert / CSS bus-auth unlockers)
Disc — scan titles, streams, AACS/CSS state
├── UDF reader — Blu-ray UDF 2.50 with metadata partitions
├── MPLS parser — playlists → titles + clips + streams
├── CLPI parser — clip info → EP map → sector extents
├── IFO parser — DVD title sets, PGC chains, cell addresses
├── Labels — 5 BD-J format parsers (detect + parse)
├── AACS — key resolution + content decryption
├── CSS — DVD CSS (bus auth → player-key disc crack → known-plaintext title-key attack)
└── KEYDB — download + verify + save
Streams — unified PES pipeline
├── PesStream — pes::Stream: one trait, read()/write() PES frames
├── DiscStream — sectors → decrypt → TS demux → PES
├── IsoStream — ISO file → decrypt → TS demux → PES
├── MkvStream — MKV mux/demux
├── M2tsStream — BD transport stream
├── NetworkStream — TCP with FMKV metadata header
├── StdioStream — stdin/stdout pipe
└── NullStream — discard sink
See docs/ for detailed technical documentation on each module.
Error Codes
All errors are structured with numeric codes. No user-facing English text — applications format their own messages.
| Range | Category |
|---|---|
| E1xxx | Device errors (not found, permission) |
| E2xxx | Profile errors (unsupported drive) |
| E3xxx | Unlock errors (failed, signature) |
| E4xxx | SCSI errors (command failed, timeout) |
| E5xxx | I/O errors |
| E6xxx | Disc format errors |
| E7xxx | AACS errors |
| E8xxx | KEYDB update errors |
| E9xxx | Stream / mux errors (URL, PES, ISO, pipeline, demux) |
Platform Support
| Platform | Status | Backend |
|---|---|---|
| Linux | Supported | SG_IO ioctl |
| macOS | Supported | IOKit SCSITask |
| Windows | Supported | SPTI |
Contributing
Run freemkv info disc:// --share with the freemkv CLI to capture your drive's identity for contribution. Drive-unlock profiles are maintained in the freemkv-unlock repository.
License
MIT