Matthew Jackson
94377c75fd
A vendor label list describes ONE playlist's stream table, but
apply_labels re-numbered it from 1 inside every title. Where sibling
playlists cover the identical feature clip and enumerate different
subtitle sets, identical ordinals resolve to different PIDs, and the
same physical stream came out flagged forced in one title and not in
the other. On the title such a disc offers as its rip target that put
`forced` on an 873 MB full-dialogue English subtitle track — the
reported "I see English and English (Forced), they are identical".
The blobs are not wrong; the binding was. The list carries no playlist
id, but it carries a language per slot, and that sequence is a
fingerprint: on the corpus exactly one title's per-type language
sequence reproduces the list position for position, and content
confirms that title's binding is the correct one. So binding is now
two-tier:
* The title whose whole per-type language sequence sits on the list
(>= 2 streams, longest wins) is the ANCHOR — the table the list is
describing. Each of its slots yields a `(clip, PID) -> label` fact,
and a PID is the same elementary stream in every playlist that
plays that clip, so sibling playlists bind through the map. A slot
the anchor never showed us is not bound at all.
* Streams no anchor fact reaches still bind by the STN ordinal, but a
label whose language contradicts the stream it would land on is
dropped. Subtitle labels carry nothing but the qualifier, so an
unverifiable one is all risk and no gain: off the authoritative
path they additionally require both sides to STATE a language and
state the same one. Unlabelled beats mislabelled — the muxer's
demotable() guard can only clear a wrong `forced` on discs whose
authoring uses forced_on_flag, and half the measured discs never
set it.
Measured over 44 disc images, 9 change and every cross-title label
conflict goes away: 171 forced flags that contradicted a sibling
playlist are cleared, 61 correct ones are recovered on playlists that
had been missing them, 5 subtitle qualifiers and 1 audio purpose bound
against a contradicting language are dropped. No title gains a label it
did not have.
Known residual: on one disc the featurette playlists keep two forced
flags (down from nine) where a shifted list happens to coincide on
language. Ruling those out needs the list's provenance — which slots
are the vendor's and which were merged in by the MPLS gap-fill — and a
whole-sequence gate without it costs correct flags on discs whose
vendor slots are interleaved with gap-filled ones.
libfreemkv
Rust library for 4K UHD / Blu-ray / DVD optical drives. Drive access, disc scanning, stream labels, AACS decryption, CSS decryption, KEYDB updates, and content reading in one crate. Drive-level unlocking is handled internally; consumers work with disc access and decryption only.
DVDs (CSS) decrypt out of the box. Blu-ray and UHD (AACS) require a keydb.cfg (default ~/.config/freemkv/keydb.cfg) supplying disc-specific volume unique keys; no AACS key material is compiled in.
12+ MB/s sustained read speeds on BD. Drive prep (init()) handles unlocking internally via the freemkv-unlock crate — clients never see it; when no drive unlock applies, the library rips via the host-certificate AACS handshake.
Multi-lingual by design — the library outputs structured data and numeric error codes, never English text. Build any UI or localization on top.
Part of the freemkv project.
Install
Consumed by git tag (not published to crates.io):
[dependencies]
libfreemkv = { git = "https://github.com/freemkv/libfreemkv", tag = "vX.Y.Z" }
Quick Start
use libfreemkv::{Drive, Disc, ScanOptions};
use std::path::Path;
// Open drive — identified via INQUIRY
let mut drive = Drive::open(Path::new("/dev/sg4"))?;
drive.wait_ready()?; // wait for disc
drive.init()?; // unlock + prep (handled internally)
drive.probe_disc()?; // probe disc surface for optimal speeds
// Scan disc — UDF, playlists, streams, AACS (all automatic)
let disc = Disc::scan(&mut drive, &ScanOptions::default())?;
for title in &disc.titles {
println!("{} — {} streams", title.duration_display(), title.streams.len());
}
// Stream pipeline — read PES frames from any source, write to any output
let opts = libfreemkv::InputOptions::default();
let mut input = libfreemkv::input("iso://Disc.iso", &opts)?;
let title = input.info().clone();
let mut output = libfreemkv::output("mkv://Movie.mkv", &title)?;
while let Ok(Some(frame)) = input.read() {
output.write(&frame)?;
}
output.finish()?;
Multi-pass recovery rip
Recovery moved OUT of this crate in 1.6.0. The sweep/patch strategy, the
ddrescue mapfile, damage classification and the multipass loop now live in the
freemkv-engine crate as freemkv_engine::recovery::{copy, sweep, patch}.
libfreemkv keeps the layers underneath: the raw single-shot read
(Drive::read) and the SCSI-fact translation (SenseFamily) that the engine's
strategy is built on. The dependency runs engine → libfreemkv, so this crate
cannot call into it; front-ends get recovery from the engine directly. See
docs/rip-recovery.md for what stayed here.
What It Does
- Drive access — open, identify, internal unlock + prep, speed control, eject
- 12+ MB/s reads — auto-detects kernel transfer limits, sustained full speed
- Disc scanning — UDF 2.50 filesystem, MPLS playlists, CLPI clip info
- Stream labels — 5 BD-J format parsers (Paramount, Criterion, Pixelogic, CTRM, Deluxe)
- AACS decryption — transparent key resolution and content decrypt (1.0 + 2.0 bus decryption)
- KEYDB updates — download, verify, save from any HTTP URL (zero deps, raw TCP)
- Content reading — adaptive batch reads with automatic decryption
- Stream I/O — unified stream pipeline for reading and writing any format
Streams
| Stream | Input | Output | Transport |
|---|---|---|---|
| DiscStream | Yes | -- | Optical drive via SCSI |
| IsoStream | Yes | -- | Blu-ray ISO image file (read via stream pipeline; written by freemkv_engine::recovery) |
| MkvStream | Yes | Yes | Matroska container |
| M2tsStream | Yes | Yes | BD transport stream with FMKV metadata header |
| NetworkStream | Yes (listen) | Yes (connect) | TCP with FMKV metadata header |
| StdioStream | Yes (stdin) | Yes (stdout) | Raw byte pipe |
| NullStream | -- | Yes | Discard sink (byte counter for benchmarks) |
Streams implement a single unified pes::Stream trait (re-exported as PesStream) exposing read() and write() on one type. input() / output() resolve URL strings to PES stream instances. All URLs use the scheme://path format — bare paths are rejected.
Keys
DVDs (CSS) decrypt out of the box, with no external key file needed.
Blu-rays and UHD (AACS) require a keydb.cfg at ~/.config/freemkv/keydb.cfg (or passed via ScanOptions). No AACS key material is compiled into the binary.
Architecture
Drive — open, identify, init, single-shot read
├── ScsiTransport — SG_IO (Linux), IOKit (macOS), SPTI (Windows)
└── unlock_bridge — private seam to the freemkv-unlock crate
(firmware / AACS cert / CSS bus-auth unlockers)
Disc — scan titles, streams, AACS/CSS state
├── UDF reader — Blu-ray UDF 2.50 with metadata partitions
├── MPLS parser — playlists → titles + clips + streams
├── CLPI parser — clip info → EP map → sector extents
├── IFO parser — DVD title sets, PGC chains, cell addresses
├── Labels — 5 BD-J format parsers (detect + parse)
├── AACS — key resolution + content decryption
├── CSS — DVD CSS (bus auth → player-key disc crack → known-plaintext title-key attack)
└── KEYDB — download + verify + save
Streams — unified PES pipeline
├── PesStream — pes::Stream: one trait, read()/write() PES frames
├── DiscStream — sectors → decrypt → TS demux → PES
├── IsoStream — ISO file → decrypt → TS demux → PES
├── MkvStream — MKV mux/demux
├── M2tsStream — BD transport stream
├── NetworkStream — TCP with FMKV metadata header
├── StdioStream — stdin/stdout pipe
└── NullStream — discard sink
See docs/ for detailed technical documentation on each module.
Error Codes
All errors are structured with numeric codes. No user-facing English text — applications format their own messages.
| Range | Category |
|---|---|
| E1xxx | Device errors (not found, permission) |
| E2xxx | Profile errors (unsupported drive) |
| E3xxx | Unlock errors (failed, signature) |
| E4xxx | SCSI errors (command failed, timeout) |
| E5xxx | I/O errors |
| E6xxx | Disc format errors |
| E7xxx | AACS errors |
| E8xxx | KEYDB update errors |
| E9xxx | Stream / mux errors (URL, PES, ISO, pipeline, demux) |
Platform Support
| Platform | Status | Backend |
|---|---|---|
| Linux | Supported | SG_IO ioctl |
| macOS | Supported | IOKit SCSITask |
| Windows | Supported | SPTI |
Contributing
Run freemkv info disc:// --share with the freemkv CLI to capture your drive's identity for contribution. Drive-unlock profiles are maintained in the freemkv-unlock repository.
License
MIT