Matthew Jackson
b9ca75f471
Four audit rounds each fixed one rule in SeamPlan::place and broke another, because the question the rules were answering has no answer. Inside a seamless-branching overlap clip k OUT comes AFTER clip k+1 IN — 57.8s of overlap on the real fixture table — so a single timestamp is legitimately inside two clips, and a clip file is not trimmed to its marks, so it also carries material from before its own IN. No rule over timestamps can say which clip a frame came from, and each attempt was right for one disc layout and silently wrong for another: 65s of rewind, 17 minutes stranded, 28 minutes dropped, 55s refused. Frames already carry the byte offset they were read from (PesFrame::source, stamped by the TS demuxer). Clip now carries the byte span its stream occupies in the title feed, recorded while the extents are gathered. So the clip is a LOOKUP: the offset falls in exactly one span. There is no decision to get wrong. Every track of a clip lives in the same stream file and therefore shares one span, so video, audio and subtitles agree by construction. Divergence between them — each track guessing separately under its own tolerance — is how audio and video ended up on different clips and drifted apart in the first place. spans_trusted gates the whole path: unless the spans tile the feed contiguously from zero, an offset means nothing and provenance is ignored in favour of the mark heuristics, which is the 1.6.0 behaviour. A broken map degrades instead of confidently selecting a wrong clip for every frame. A clip referenced twice reuses its first span (the bytes are read once) and is still trusted. Sources that stamp no provenance — a mkv:// remux, the deserialize hop — take the heuristics, which is what they have always used and where they have always been right, because they have no overlapping clips to be ambiguous about. 36 timeline tests, six of them new and covering: the overlap case marks cannot see, all tracks agreeing, out-of-marks material dropped AND counted, a holed span map, a discontiguous one, a repeated clip, and no provenance at all.
libfreemkv
Rust library for 4K UHD / Blu-ray / DVD optical drives. Drive access, disc scanning, stream labels, AACS decryption, CSS decryption, KEYDB updates, and content reading in one crate. Drive-level unlocking is handled internally; consumers work with disc access and decryption only.
DVDs (CSS) decrypt out of the box. Blu-ray and UHD (AACS) require a keydb.cfg (default ~/.config/freemkv/keydb.cfg) supplying disc-specific volume unique keys; no AACS key material is compiled in.
12+ MB/s sustained read speeds on BD. Drive prep (init()) handles unlocking internally via the freemkv-unlock crate — clients never see it; when no drive unlock applies, the library rips via the host-certificate AACS handshake.
Multi-lingual by design — the library outputs structured data and numeric error codes, never English text. Build any UI or localization on top.
Part of the freemkv project.
Install
Consumed by git tag (not published to crates.io):
[dependencies]
libfreemkv = { git = "https://github.com/freemkv/libfreemkv", tag = "vX.Y.Z" }
Quick Start
use libfreemkv::{Drive, Disc, ScanOptions};
use std::path::Path;
// Open drive — identified via INQUIRY
let mut drive = Drive::open(Path::new("/dev/sg4"))?;
drive.wait_ready()?; // wait for disc
drive.init()?; // unlock + prep (handled internally)
drive.probe_disc()?; // probe disc surface for optimal speeds
// Scan disc — UDF, playlists, streams, AACS (all automatic)
let disc = Disc::scan(&mut drive, &ScanOptions::default())?;
for title in &disc.titles {
println!("{} — {} streams", title.duration_display(), title.streams.len());
}
// Stream pipeline — read PES frames from any source, write to any output
let opts = libfreemkv::InputOptions::default();
let mut input = libfreemkv::input("iso://Disc.iso", &opts)?;
let title = input.info().clone();
let mut output = libfreemkv::output("mkv://Movie.mkv", &title)?;
while let Ok(Some(frame)) = input.read() {
output.write(&frame)?;
}
output.finish()?;
Multi-pass recovery rip
Recovery moved OUT of this crate in 1.6.0. The sweep/patch strategy, the
ddrescue mapfile, damage classification and the multipass loop now live in the
freemkv-engine crate as freemkv_engine::recovery::{copy, sweep, patch}.
libfreemkv keeps the layers underneath: the raw single-shot read
(Drive::read) and the SCSI-fact translation (SenseFamily) that the engine's
strategy is built on. The dependency runs engine → libfreemkv, so this crate
cannot call into it; front-ends get recovery from the engine directly. See
docs/rip-recovery.md for what stayed here.
What It Does
- Drive access — open, identify, internal unlock + prep, speed control, eject
- 12+ MB/s reads — auto-detects kernel transfer limits, sustained full speed
- Disc scanning — UDF 2.50 filesystem, MPLS playlists, CLPI clip info
- Stream labels — 5 BD-J format parsers (Paramount, Criterion, Pixelogic, CTRM, Deluxe)
- AACS decryption — transparent key resolution and content decrypt (1.0 + 2.0 bus decryption)
- KEYDB updates — download, verify, save from any HTTP URL (zero deps, raw TCP)
- Content reading — adaptive batch reads with automatic decryption
- Stream I/O — unified stream pipeline for reading and writing any format
Streams
| Stream | Input | Output | Transport |
|---|---|---|---|
| DiscStream | Yes | -- | Optical drive via SCSI |
| IsoStream | Yes | -- | Blu-ray ISO image file (read via stream pipeline; written by freemkv_engine::recovery) |
| MkvStream | Yes | Yes | Matroska container |
| M2tsStream | Yes | Yes | BD transport stream with FMKV metadata header |
| NetworkStream | Yes (listen) | Yes (connect) | TCP with FMKV metadata header |
| StdioStream | Yes (stdin) | Yes (stdout) | Raw byte pipe |
| NullStream | -- | Yes | Discard sink (byte counter for benchmarks) |
Streams implement a single unified pes::Stream trait (re-exported as PesStream) exposing read() and write() on one type. input() / output() resolve URL strings to PES stream instances. All URLs use the scheme://path format — bare paths are rejected.
Keys
DVDs (CSS) decrypt out of the box, with no external key file needed.
Blu-rays and UHD (AACS) require a keydb.cfg at ~/.config/freemkv/keydb.cfg (or passed via ScanOptions). No AACS key material is compiled into the binary.
Architecture
Drive — open, identify, init, single-shot read
├── ScsiTransport — SG_IO (Linux), IOKit (macOS), SPTI (Windows)
└── unlock_bridge — private seam to the freemkv-unlock crate
(firmware / AACS cert / CSS bus-auth unlockers)
Disc — scan titles, streams, AACS/CSS state
├── UDF reader — Blu-ray UDF 2.50 with metadata partitions
├── MPLS parser — playlists → titles + clips + streams
├── CLPI parser — clip info → EP map → sector extents
├── IFO parser — DVD title sets, PGC chains, cell addresses
├── Labels — 5 BD-J format parsers (detect + parse)
├── AACS — key resolution + content decryption
├── CSS — DVD CSS (bus auth → player-key disc crack → known-plaintext title-key attack)
└── KEYDB — download + verify + save
Streams — unified PES pipeline
├── PesStream — pes::Stream: one trait, read()/write() PES frames
├── DiscStream — sectors → decrypt → TS demux → PES
├── IsoStream — ISO file → decrypt → TS demux → PES
├── MkvStream — MKV mux/demux
├── M2tsStream — BD transport stream
├── NetworkStream — TCP with FMKV metadata header
├── StdioStream — stdin/stdout pipe
└── NullStream — discard sink
See docs/ for detailed technical documentation on each module.
Error Codes
All errors are structured with numeric codes. No user-facing English text — applications format their own messages.
| Range | Category |
|---|---|
| E1xxx | Device errors (not found, permission) |
| E2xxx | Profile errors (unsupported drive) |
| E3xxx | Unlock errors (failed, signature) |
| E4xxx | SCSI errors (command failed, timeout) |
| E5xxx | I/O errors |
| E6xxx | Disc format errors |
| E7xxx | AACS errors |
| E8xxx | KEYDB update errors |
| E9xxx | Stream / mux errors (URL, PES, ISO, pipeline, demux) |
Platform Support
| Platform | Status | Backend |
|---|---|---|
| Linux | Supported | SG_IO ioctl |
| macOS | Supported | IOKit SCSITask |
| Windows | Supported | SPTI |
Contributing
Run freemkv info disc:// --share with the freemkv CLI to capture your drive's identity for contribution. Drive-unlock profiles are maintained in the freemkv-unlock repository.
License
MIT