Fixes the silent Pass 1 hang observed on Dune 2 with v0.13.8 (drive
grinding through bad sectors at 0 KB/s, errs=0, no error surfaced).
Root cause: SgIoTransport::execute's reopen-after-poll-timeout opened
a fresh /dev/sg* fd on the main thread, which serialized against the
spawned close() of the old fd via the kernel's per-device state lock.
The userspace 1.5s timeout still fired, but the abandon-and-reopen
recovery itself blocked the main thread for as long as close() took.
Net: reads returned slowly, skip-forward fired on every iteration,
bytes_good never advanced.
- SgIoTransport::execute: on poll timeout, spawn close, set fd=-1,
return Err. No reopen on the main thread. The transport is now
invalidated until the consumer creates a fresh Drive.
- Disc::copy: add stall guard. CopyOptions.stall_secs (default 120s).
If bytes_good doesn't advance for the threshold, break 'outer
cleanly with complete=false, bytes_pending > 0 so Pass 2 retries
pick up the NonTrimmed ranges with recovery=true 30s timeouts.
- New regression test: test_disc_copy_stall_detection_triggers_
skip_forward in tests/integration_progress_and_halt.rs.
Follow-up to the rip-recovery + drive-access updates: aligns the
remaining docs with the v0.13.6 single-shot read model and the
three-layer recovery architecture.
- architecture.md: module map says single-shot read; new paragraph on
layered recovery with postmortem pointer.
- api-design.md: EventKind enum example expanded; emission notes
document that BytesRead now fires from DiscStream::fill_extents and
Retry/SectorRecovered are no longer emitted in 0.13.6+.
- disc-to-rip.md: Step 10 of the pipeline diagram + module table
reflect single-shot read.
- docs/README.md: added rip-recovery.md to the TOC.
Updates docs/ to reflect the recovery-loop strip:
- rip-recovery.md: drops Phase 1/2/3 description, replaces with three-layer
model (Disc::patch multi-pass / DiscStream batch halving / Drive::read
single-shot). Notes that no SCSI resets fire from any retry path.
- drive-access.md: removes SG_SCSI_RESET + STOP/START UNIT escalation
references; SgIoTransport::reset is now kernel SG_IO flush + ALLOW
MEDIUM REMOVAL only.
- src/mux/disc.rs + tests/: cargo fmt cleanup.
Drive::read is now single-shot. Phase 1/2/3 retries + scsi::reset+reopen
removed (~80 lines). recovery=true bumps timeout to 30s; recovery=false
stays at 1.5s. On any failure returns Err(DiscRead) immediately — caller
(Disc::patch outer loop, DiscStream batch halver) handles retries.
Inline reset+reopen WAS the wedge primitive on the LG BU40N. Per prior
post-mortem, every USB/SCSI reset path tested fails to recover the
wedged Initio bridge — the inline retry was pure cost.
SgIoTransport::reset (Linux) trimmed to kernel SG_IO state flush +
ALLOW MEDIUM REMOVAL. SG_SCSI_RESET ioctl + STOP/START UNIT escalation
removed. macOS reset removed (no-op). scsi::reset() top-level family
removed (no callers).
EventKind::BytesRead { bytes, total } now actually emitted from
DiscStream::fill_extents after each successful sector read. Was
declared in 0.13.0, never fired. Drives autorip per-device progress
in direct mode.
EventKind::Retry / SectorRecovered no longer emitted (variants kept
for forward compat). SpeedChange still emitted via Drive::set_speed
public path.
Tests: new tests/integration_progress_and_halt.rs (5 tests). 233 unit
tests + 5 integration green.
USB/SCSI recovery escalation in drive_has_disc (0.13.1-0.13.3) tested
on LG BU40N USB BD-RE: USBDEVFS_RESET, authorized toggle, driver
unbind/rebind, SCSI host rescan — all succeed at the USB transport
layer but the drive firmware below the bridge stays locked. Only
physical unplug-replug clears it. Rolled back so consumers can
surface the real failure to the user.
New: list_drives falls back to sysfs-cached vendor/model/rev from
/sys/class/scsi_generic/sgN/device/ when live INQUIRY returns empty,
so wedged drives still show their identity in UIs.
Removed: scsi::usb_reset, usb_reset_with_timeout, per-platform
usb_reset methods, recover_then_probe, is_wedge_signature. Breadcrumb
comment in scsi/linux.rs::drive_has_disc points at v0.13.3 tag for
the full implementation if future hardware needs it back.
Linux/macOS/Windows pass-through symmetric; 233 tests passing.
0.13.2's is_wedge_signature gated on opcode=SCSI_INQUIRY (0x12), but
drive_has_disc issues TEST UNIT READY (0x00). Production wedge errors
(E4000: 0x00/0xff/0x00) never matched → SCSI reset + USB reset
escalation never fired.
Drop the opcode gate. Status byte 0xFF is synthesised by our own
execute() path on poll() timeout — it's the ground-truth wedge
marker for any opcode.
Linux-only; macOS/Windows use sense-key-based wedge detection.
Architectural cleanup. autorip + freemkv CLI were reimplementing drive
discovery (sysfs walking, type-5 filtering, sg-path construction) and
calling SCSI reset primitives directly. All of that hardware-aware code
moves into libfreemkv with two cheap public probes:
- DriveInfo + list_drives() — multi-OS enumeration (Linux/macOS/Windows)
with peripheral-type-5 filtering and INQUIRY identity. Cheap.
- drive_has_disc(path) — single TUR with internal wedge recovery
escalation (SCSI reset → USB reset → retry) hidden from callers.
USB-layer reset (USBDEVFS_RESET / IOUSBDeviceInterface::ResetDevice /
storport's combined reset) wired across all three platforms.
Visibility tightening — scsi::reset, scsi::usb_reset, and the timeout
constants are now pub(crate). Compile-time guarantee that no consumer
crate can issue SCSI commands directly.
233 lib tests pass; clippy clean.
Production incident: autorip's poll loop called scsi::reset() on a
wedged BU40N USB drive. The Linux SG_SCSI_RESET ioctl blocked
indefinitely (kernel SCSI subsystem waiting for a bus-wedged device to
ack a reset that will never come). Caller's poll loop hung for 60+
seconds before manual intervention.
scsi::reset() now spawns a detached worker for the platform-specific
reset and bounds the caller's wait via mpsc::recv_timeout. Default
30 s (DEFAULT_RESET_TIMEOUT_SECS); reset_with_timeout(device, dur)
exposes the bound for callers that want a different value. Returns
DeviceResetFailed on timeout. Worker thread keeps running until the
kernel eventually unblocks — leaks one OS thread per hard wedge, but
the daemon stays responsive instead of hanging forever.
Follow-up flagged for 0.13.2: USB-attached drives wedge at the USB
Mass Storage layer below SCSI; SG_SCSI_RESET doesn't help. A
scsi::usb_reset(path) using USBDEVFS_RESET is the proper escalation.
Audit pass against the project docs "no English text in library code" rule.
Found 9 call sites that violated the contract by stuffing English into
io::Error::new(kind, "…") or by abusing Error::DeviceNotFound { path }
as a free-form description field. Each is now a typed Error variant.
New variants and codes: ScsiInterfaceUnavailable (E1004), DeviceLocked
(E1005), IoKitPluginFailed (E1006), UnsupportedPlatform (E2003),
PlatformNotImplemented (E2004), MapfileInvalid (E6011), DiscUrlNotDirect
(E9009).
labels::apply() previously pushed Commentary/Descriptive/Score/IME and
" (Secondary)" English literals into AudioStream.label, leaking into
MKV titles + autorip UI. AudioStream now exposes structured `purpose:
LabelPurpose`, SubtitleStream `qualifier: LabelQualifier`. Callers
translate to localized text. label keeps codec-formatting only.
API hygiene: 11 mux/* modules dropped from `pub` to `pub(crate)` —
their *types* are still re-exported from lib.rs, but the modules were
leaking low-level EBML/TS/network primitives. Stream trait gets a real
rustdoc explaining read-vs-write split. lib.rs grouped re-exports into
documented sections. ScanOptions::with_keydb() removed (one-method-per-
action rule); use struct literal.
Dead-code sweep: removed lookahead.rs (orphan, never declared as mod),
tsreader.rs (TsDemuxReader unused), ebml::{write_int,read_vint,SEEK_*},
ts::{scan_first/last_pts,scan_duration,SCAN_HEAD/TAIL_SIZE,take/set_
remainder}, MkvMuxer codec_private_slots/filled fields and
fill_codec_private method (deferred-codecPrivate path never used since
the v0.10 PES rewrite). cargo clippy --all-targets -D warnings clean.
Tests: new error::tests for variant codes + Display "no English" guard +
io::ErrorKind mapping. 233 lib tests, all green (was 230).
Breaking: ScanOptions::with_keydb removed; mux/* modules pub(crate);
AudioStream and SubtitleStream gained required fields; UnsupportedDrive
{ product_revision: "Renesas not yet implemented" } no longer produced
(use PlatformNotImplemented).
Drive::read is now halt-check-free in its body. Previously, the halt
flag was checked in 4 places and the sleep logic was scattered across
4 "if halt_aware_sleep { return Halted }" call sites — correct, but
the ugliness invited drift: a new sleep added by someone unfamiliar
with the pattern would silently swallow Stop requests.
Two private primitives now own halt awareness:
checked_sleep(Duration) -> Result<()>
checked_exec(cdb, dir, buf, timeout_ms) -> Result<ScsiResult>
Both return Err(Halted) instead of a bool. The ? operator in read()
then propagates halts for free. The recovery path reads top-to-bottom
with no halt vocabulary.
sleep_until_halted lives as a free function so it's unit-testable
without a live Drive. 4 new tests: completes normally, bails on
pre-set flag within one slice, wakes mid-sleep, zero-duration no-op.
Public API unchanged — halt_flag/halt/clear_halt still exposed, the
refactor is entirely internal.
Stop was waiting up to 30 s to register when the drive hit L-EC
recovery mid-read — the recovery phase does 30 s sleeps between
retries and the halt flag was only checked at the start of each sleep.
UI feels broken ("stop isnt working") even though the halt was set.
halt_aware_sleep breaks each wait into 100 ms slices and returns
early on halt. Applied to all 4 sleeps in the recovery path (both
30 s retry delays, both 5 s reset-phase delays).
Disc::copy fast pass (skip_on_error=true, recovery=false) was giving
the drive 5 s per 64 KB block. On structure-protected / marginal UHD
sectors the drive grinds L-EC for nearly the full budget per block,
pinning throughput at ~13 KB/s even though skip_forward would happily
skip past the region.
1500ms bounds the floor at ~43 KB/s/block. Recoverable sectors that
would have succeeded at 3-5 s get picked up on Disc::patch (pass 2+)
where recovery=true and the per-read budget is 30 s.
- README quick-start gains a multi-pass example using the new
Disc::copy + Disc::patch primitives.
- New docs/rip-recovery.md documents the two-stage rip model: mapfile
format (ddrescue-compatible), CopyOptions/PatchOptions surface, the
pass-1/pass-2 algorithm, and the design decisions (why no MODE
SELECT, why ISO intermediate, why ddrescue mapfile).
No code change.
autorip 0.11.22 ships the full multi-pass UI (live mapfile stats,
bad-range viz, Recovery settings). libfreemkv API is unchanged from
0.11.21. Part of the 0.11.22 ecosystem sync.
New primitives for two-stage rip workflows: fast forward pass with
zero-fill on failures, then targeted retries of bad ranges via a
ddrescue-compatible mapfile.
- Disc::copy now takes &CopyOptions (breaking change from positional
args). Always writes a sidecar .mapfile. Opt-in skip_on_error +
skip_forward give ddrescue-style fast sweep: 64 KB blocks,
exponential skip-forward on failure, zero-fill bad blocks. Defaults
preserve pre-0.11.21 behavior (recovery reads, abort on bad sector).
- Disc::patch is new and idempotent. Reads the mapfile, re-reads every
non-finished range with full drive recovery, patches good bytes back
into the ISO at exact offsets. Call N times for N retry attempts.
- disc::mapfile is a new module. ddrescue text format, crash-safe
(flushed on every record()), greppable, human-editable, tool-compatible.
Status chars match ddrescue: ? / * / / / - / +.
- Re-exports FileSectorReader from the crate root.
- freemkv CLI caller (pipe.rs) updated to the new Disc::copy signature
in lockstep — shipped in the 0.11.21 freemkv CLI release.
Part of the 0.11.21 ecosystem sync (libfreemkv + freemkv + bdemu +
autorip all on 0.11.21).
DiscStream::fill_extents loops internally while the demuxer waits for
enough clean data to emit a PES frame. In a dense bad zone that loop
can run for minutes without returning to the outer read() call, so
the caller's Stop signal never gets serviced until a frame is finally
emitted — which may be very far away.
Add DiscStream::set_halt(Arc<AtomicBool>) — typically wired to
Drive::halt_flag() for unified Stop across drive recovery phases and
stream sector processing. fill_extents checks the flag at the top of
every retry iteration; raising it returns Err(Error::Halted) within
one SCSI round-trip.
No behavior change for callers that don't call set_halt. Unblocks the
architectural fix for the "Stop doesn't stop" bug observed on a
damaged UHD disc.
Replace read_with_binary_search + 3×5s light recovery with an adaptive
sizer that shrinks on failure (halve, 3-aligned ≥6) and probes back up
after 100 MiB (51,200 sectors) of clean reads. Descent cost is paid
once per bad region, not once per bad sector.
Emit BatchSizeChanged { new_size, reason } on shrink and probe-up.
Remove BinarySearch event — no longer produced.
Side fix: scsi/macos.rs one-liner for manual_c_str_literals clippy
lint that surfaced on a newer toolchain.
Fix trailing sectors dropped at extent boundaries when sector_count % 3 != 0.
Add verify_title stop support via progress callback returning bool.
Add O_CLOEXEC on all SCSI fd opens to prevent leak to child processes.
Fix SCSI sense descriptor format detection (0x72/0x73 vs 0x70/0x71).
Replace blocking ioctl(SG_IO) with the sg driver's async interface.
Commands are submitted via write(), waited on via poll() with a hard
wall-clock timeout, and completed via read(). If poll() times out,
the fd is abandoned and a fresh one opened — the kernel can no longer
hold us hostage during USB error recovery.
- write() submits command, returns immediately
- poll() enforces exact timeout (EINTR-safe with deadline tracking)
- read() retrieves result + copies data to caller's buffer
- On timeout: old fd closed in background thread, new fd opened
- No SG_FLAG_DIRECT_IO — kernel buffers for safe timeout abandonment
- Store device_path for fd reopen after timeout
- Drop guards fd=-1 (abandoned fd)
Use UDF file_extents() to read actual allocation descriptors instead
of assuming m2ts files are contiguous from file_start_lba. Dual-layer
UHD discs split large files across 70+ extents (~1 GB each) — the old
code created one extent from packet count which only covered the first
chunk, causing silent truncation at ~37%.
Also changed fill_extents() to return io::Result<bool> so read errors
propagate instead of being silently treated as EOF.
A stream is a stream. DiscStream::new() takes reader + title + keys +
batch + format — same pattern as every other stream constructor.
Deleted: open_drive(), open_iso(), from_reader() — these were helper
functions that chained multiple operations. Library provides primitives,
callers decide the sequence.
Removed disc:// case from input() — callers use Drive::open() +
Disc::scan() + DiscStream::new() directly for disc sources.
- DTS: buffer with core sync detection + frame size from header
- TrueHD: buffer with unit length field parsing
- Same pattern as AC3 fix: incomplete frames held for next PES
- When PES boundaries align (normal case), buffering is a no-op
- Add state to Ac3Parser (was stateless, split frames at PES boundaries)
- Buffer leftover bytes from incomplete frames for next PES packet
- Calculate exact AC3 frame size from fscod/frmsizecod table
- Calculate EAC3 frame size from frmsiz field
- Skip invalid frame sizes (0 or >8192)
- Eliminates all AC3 decode errors on BD and UHD output
- DVD PS path now calls parser.parse() like BD-TS path does
- MPEG-2 sequence headers extracted for codec_private
- Keyframe detection from parser instead of always-true
- Fix CSS roundtrip tests: descramble uses TAB1 permutation, not pure XOR
- Implement complete CSS key chain: bus auth → disc key → title key
- Add 31 player keys for disc key decryption
- Read disc key via READ DVD STRUCTURE format 0x02
- Read title key via REPORT KEY format 0x04
- Fix CryptKey round 1: use original scratch for term, not modified tmp1
- Fix decrypt_key: use TAB5 for LFSR1 output, TAB4 for LFSR0^invert
- Fix descramble_sector: use TAB5 for LFSR1, TAB4 for LFSR0 (no invert),
and apply TAB1 permutation to ciphertext before XOR
- Fix title key bus XOR: forward order (bus_key[i]), not reversed
- Two-session auth: disc key and title key need separate AGID sessions
- Fix crack_key: scan across extents for scrambled sectors
- Fix TsDemuxer: dynamic PID table size for DVD PIDs
- Set max read speed after scan for DVD riplock removal
- Disc::copy() hardcoded batch=64 sectors, exceeding BU40N's 60-sector
hw limit. Now accepts batch_sectors param, defaults to 60.
- IFO PGC: playback time at offset 0x04 not 0x02, cell time at cell+4
- DiscStream: set demuxer from content_format (TS for BD, PS for DVD)
- Flush TS/PS demuxers at EOF to avoid losing last PES frame
- M2tsStream: flush demuxer at EOF
- StdioStream: FMKV metadata header for roundtrip compatibility
Architecture:
- One stream per format, bidirectional PES (read/write on same type)
- IsoStream merged into DiscStream (one type, any SectorReader)
- Disc::copy() for disc→ISO raw sector dump
- IOStream trait deleted, all byte-level Read/Write removed
- ContentReader/OpenDisc/open_title/open_input/open_output deleted
- CountingStream wrapper for progress tracking
Error codes:
- All io::Error English strings replaced with Error enum variants
- From<Error> for io::Error conversion
- Unused variants removed, new stream/mux variants added
Deleted: mkvout.rs, pesout.rs, isowriter.rs, mkv-muxer-plan.md
Updated: all docs, README stream table, CHANGELOG
238 tests, 0 clippy warnings.
Streams are streams — they take impl Read, not Read+Seek or File.
- MkvStream::open takes impl Read (was Read+Seek)
- EBML element skipping uses skip_bytes() instead of seek(Current)
- Byte position tracking uses remaining-bytes counter, not stream_position()
- Removed file_size from open (progress is CLI concern)
- M2tsStream::open takes impl Read (was Read+Seek)
- Buffers first 1MB for FMKV header / PMT scan
- Uses chain reader (buffered head + rest) for sequential reading
- Duration unknown without seeking (0.0) — CLI can set from metadata
- Removed ReadSeek trait (no longer needed)
- WriteSeek kept (MKV muxer container format requires seeking internally)
Design fix: codec_privates are now a field on DiscTitle, not a separate
parameter passed through the pipeline. This eliminates the root cause of
the network codec_private bug (forgot to pass the separate param).
API changes:
- output() takes (url, &DiscTitle) — no separate codec_privates param
- MkvOutputStream::create, M2tsOutputStream::create, NetworkOutputStream::connect
all read codec_privates from title.codec_privates
- M2tsMeta::from_title() takes only &DiscTitle — reads privates from title
- Deleted from_title_with_privates (was the wrong-name duplicate)
- Merged read_header + read_header_from_stream into one read_header(impl Read)
- Deleted finish(self) from TsMuxer, keep only finish(&mut self)
Rule: ONE public method per action. No _with_X, _from_Y, _ref variants.
Bug 1: M2TS roundtrip dropped frames — TsMuxer converts length-prefixed
NALs to Annex B, prepends VPS/SPS/PPS from HEVCDecoderConfigurationRecord.
Bug 2: MKV remux lost codec_private — MkvStream.codec_private() now returns
data from EBML header.
FMKV header carries codec_private (base64) per video stream for lossless
M2TS roundtrip.
- M2tsOutputStream writes FMKV metadata header before TS data
- NetworkOutputStream sends FMKV header on connect
- Enables M2TS→MKV and network roundtrip to work correctly
- Remove IOStream, Read, Write impls from NetworkStream
- PES write sends FMKV header before first frame (protocol fix)
- PES finish sends TCP shutdown for clean EOF
- Update tests to use PES roundtrip instead of byte-level
- Remove NetworkStream from open_input/open_output (use input/output)
- Remove unused pes_buf field from M2tsStream and unused TS_PACKET/BD_TS_PACKET constants
- Replace match-with-single-pattern with if let (3 instances in drive/mod.rs)
- Replace match-can-be-? with ? operator for scsi::open call
- Add type aliases PesSetup and MkvHeaderResult to reduce type complexity
- Collapse identical if/else branches in tsmux.rs build_pes_header
- Use RangeInclusive::contains instead of manual range checks
- Make WriteSeek trait pub (was pub(crate) but leaked through pub fn)
- Remove empty line after doc comment in disc.rs
- Fix doc list item indentation in scsi/linux.rs (12 instances)
- DiscStream: BD (TsDemuxer) or DVD (PsDemuxer) auto-detected
- NetworkStream: Stream impl with PES serialize/deserialize
- StdioStream: Stream impl with PES serialize/deserialize
- MkvStream: Stream read returns PesFrame from EBML blocks
- M2tsStream: Stream read via TsDemuxReader
- PesFrame: serialize/deserialize for wire format
- TsDemuxReader: shared BD-TS demux helper
- All inputs and outputs support PES
- Unified Stream trait: read() and write() on one type
- PesFrame serialize/deserialize for wire format
- TsDemuxReader: shared BD-TS demux for any Read source
- MkvStream: PES read from MKV (EBML → PesFrame)
- M2tsStream: PES read via TsDemuxReader
- Network/Stdio output: PES serialization directly (no BD-TS wrap)
- Network/Stdio input: deferred (needs PES deserialization protocol)
- TsMuxer for M2TS output from PES frames
- input() and output() functions return Box<dyn Stream>
Stream trait: read() returns PesFrame, write() accepts PesFrame.
A stream is a stream — you read from it or write to it.
No separate Input/Output traits.
API: libfreemkv::input(url) and libfreemkv::output(url, title, codecs)
Returns Box<dyn Stream>.
- TsMuxer: PES frames → BD-TS packets (new, reverse of TsDemuxer)
- M2tsOutputStream: PES → TsMuxer → file
- NetworkOutputStream: PES → TsMuxer → TCP
- StdioOutputStream: PES frames → stdout
- NullOutputStream: discard
- MkvOutputStream: PES → MKV mux
- All outputs via open_pes_output()
- All inputs via open_pes_input() (ISO, disc)
- No byte-level fallback — everything is PES
- pes.rs: PesFrame, InputStream, OutputStream traits
- sector.rs: SectorReader now public, added FileSectorReader (ISO = file)
- Foundation for unified DiscStream that handles both disc and ISO
When the MKV muxer transitions from Scanning to Streaming phase,
it creates a fresh TsDemuxer. The old demuxer's remainder bytes
(partial 192-byte BD-TS packets) were lost, causing the new demuxer
to lose sync. All subsequent feed() calls found 0 packets.
Fix: transfer remainder via take_remainder/set_remainder so the
new demuxer maintains packet alignment.
MattJackson